User's Manual

23
Basic
Operations
You can receive calls as long as the out-of-service icon ( ) is not
displayed. The
icon indicates that you are outside the service area.
When you receive a call, the ringer sounds and “Incoming Call” flashes.
Notes
• If you turn off the ringer volume (see page 41), you will not hear the
ringer sound. The message “–Ringer Off–” is displayed on the standby
display.
• You can quickly mute the ringer when you receive a call by turning
–
down (see page 41).
1 Press
SEND
to answer the call.
When the call is connected, the call
timer appears and displays the elapsed
call time.
2 Press
END
to end the call when you are
finished.
The icon disappears and the final elapsed call time
flashes for 10 seconds. The standby display
automatically reappears.
Tips
• Using the Jog Dial navigator, you can adjust the earpiece volume or
mute the microphone during a call (see page 22).
• Enhanced voice privacy is indicated by the message “–P–” displayed in
the upper left corner of the LCD (see page 73). This feature is carrier-
dependent.
• If AnyKey Answ is turned on, you can answer the call by pressing any
button except
PWR
(see page 58).
Receiving calls
Time: 0:01
B2200 21-24draft3 8/21/98, 12:12 PM23