User's Manual

40
3 Turn to select “Backlight”, then push .
The Backlight menu appears. The current setting is
indicated by a check mark (✓) and is displayed in capital
letters. (See page 67 for an additional description on
setting the backlight.)
4 Turn to select the setting.
The available options appear in a cyclic manner as you
turn .
5 Push to enter the new setting.
The standby display reappears.
To exit from the Features menu
Press
END
or hold down
CLR
to return to the standby display.
To return to the previous display
Press
CLR
. To go back further, press
CLR
again.
Notes
• If you reach the last menu item and try to turn further, a beep
indicates that you have reached the end of the menu. To view other
menu items, turn
in the opposite direction.
• The standby display automatically reappears after 30 seconds of
inactivity.
Tip
Each menu item can be accessed quickly from the standby display by
pushing and then pushing the number of the menu item. The item
number then appears in the upper left corner of the display in step 3. For
example, you can access the backlight setting by pushing followed by
6
MNO
and
2
ABC
.
B2200 39-55draft3 8/21/98, 12:13 PM40