User's Manual

Setting the keybeep type [F16]

You can set the beep that sounds when you press a button to either a

tone or a click. Tones sound similar to DTMF tones and clicks are

indicated by single beeps.

1 Turn to select “Key Sound”

from the Sounds menu, then

push

The Key Sound menu appears.

2 Turn to select the keybeep type.

You can select “tones” or “clicks”.

3 Push to enter the new setting.

The standby display reappears.

Note

DTMF tones are sent to the other party during a call even if you set the

keybeep type to “clicks”.

Setting the keybeep length [F17]

You can set the length of the beep that sounds when you press a button.

This setting affects both the keybeep feedback and DTMF transmission

tones. The phone sends a short DTMF burst (default) or plays every tone

of the DTMF signal as long as the key is held down.

1 Turn to select “Beep

Length” from the Sounds

menu, then push

The Beep Length menu appears.

2 Turn to select the keybeep length.

You can select “standard” or “long”.

3 Push to enter the new setting.

The standby display reappears.

F16

KEY SOUND

TONES

:Choices

:To Set

F16

BEEP LENGTH

STANDARD

:Choices

:To Set

F17

B2200 39-55draft3 8/21/98, 12:13 PM44