User's Manual

74
AUTO-N.A.M.
OFF
:Choices
:To Set
F75
SET-N.A.M. 1
NAM #1
:Choices
:To Set
F76
Switching NAM’s automatically [F75]
Your phone allows you to store up to two NAM’s (Number Assignment
Modules). To add or remove NAM’s, contact your service provider who
will change the NAM’s for you. You can set the phone to switch between
them automatically. The phone switches from one NAM to the other if it
enters a service provider’s coverage area that matches one of your NAM
settings. To switch manually, see “Switching NAM’s manually” below.
1 Turn to select “Auto-N.A.M.”
from the Network menu, then
push
.
The Auto-N.A.M. menu appears.
2 Turn to set automatic switching on or off.
3 Push to enter the new setting.
The standby display reappears.
Switching NAM’s manually [F76]
If automatic switching is turned off, you can configure the phone for
manual switching between the two NAM’s. You must switch from one
NAM to the other if the phone enters a service provider’s coverage area
that matches the other NAM setting. To set the phone to switch
automatically, see “Switching NAM’s automatically” above.
1 Turn to select “Set-N.A.M.”
from the Network menu, then
push
.
The Set-N.A.M. menu appears.
2 Turn to switch between the two NAM’s.
The display alternately shows the name and the number
of the selected NAM.
3 Push to enter the new setting.
The standby display reappears.
B2200 56-76draft3 8/21/98, 12:14 PM74