User's Manual

 Wait with the power switch set to ON. Operation will start automatically when a
wireless signal is received.
 Light color will change by wireless command only in a venue where a FreFlow®
wireless system is set up.
 Light color cannot be changed by the color change button while a wireless signal
is being received.
 When a wireless signal is no longer received, you can operate the product as you
like.
 Model Name: FFS-R series
 Materials
Grip, cover: ABS / Light emitting part: PE
 Power Requirement
Two size AAA (LR03) alkaline batteries: 3.0 V DC
 Push the tab in the direction indicated by the arrow, and remove the battery box
cover.
 Insert the two batteries, making sure the + and – terminals are in the correct
direction, and close the cover securely.
 Set the batteries with the + and – terminals in the correct direction.
 Remove the batteries when they are depleted or when not using for a long period
of time.
 Do not use or leave in places with intense direct sunlight or in hot locations such as
a car in the sun.
 Use new batteries when replacing the batteries. Do not mix with old batteries,
different types of batteries, etc.
 Do not subject batteries to fire or high temperatures.
 Tape over battery contacts to avoid short-circuit when disposing of batteries, and
follow local regulations for battery disposal.
Operation With a FreFlow® Wireless System
How to Replace Batteries
TabCover
<Improper use of batteries may lead to leaking, excessive heating,
rupture, or damage. Please follow the cautions below.>
Specifications
MADE IN VIETNAM
FreFlow® and its logo are trademarks or registered trademarks of Sony Engineering
Corporation.
This product contains software (hereafter referred to as “the software”) whose
copyright belongs to Sony Engineering Corporation and/or its parent company,
subsidiary, or affiliate, or a third party such as a licensee.
The software is protected by domestic and international copyright laws, treaties
related to the rights of creators and neighboring rights, and other intellectual
property laws. The software cannot be, in whole or in part, copied, translated,
modified, or distributed without consent.