User Manual

26 Calling
Calling
Before you can make or receive any calls, you must turn
on the phone and be within range of a network. See
“Making and receiving calls” on page 23.
Making calls
1. Enter the area code and the phone number.
2. Press
CALL to make the call.
3. Press END to end the call.
To change the earpiece volume during a call
Press the upper or lower side volume key to increase or
decrease the earpiece volume during a call.
To mute the microphone during a call
Press and hold
CLR until the display shows Muted. Press
and hold CLR again to resume the conversation.
Automatic redialing
If the connection of the call failed and the display shows
Retry?, press YES. The phone redials the number (up to
ten times):
• until the call is connected.
• until you press a key or receive a call.
Making international calls
1. Press and hold until a + sign appears in the
display. The + replaces the international prefix number
of the country from which you are calling.
2. Enter the country code, area code (without the leading
zero) and phone number,
CALL.
Making emergency calls
• Enter 112, 911, or 08 press CALL.
Your mobile phone supports the international
emergency numbers, 112, 911, or 08. This means that
Tip!
You can call numbers from the call list and the
phonebook. See “Call list” on page 27 and
“Phonebook” on page 28. You can also use your
voice to make calls. See “Voice Control” on
page 43.
Note!
Do not hold the phone to your ear while waiting.
When the call is connected, the phone gives a
loud signal. Automatic redialing is not available
for fax and data calls.
+