User Manual

44 Voice Control
Caller name
You can choose whether or not you want to hear the
recorded contact name when you receive an incoming
call from that contact.
To turn the caller name On or Off
1. Scroll to Settings, Voice Control, Caller Name.
2. Select On or Off.
Voice dialing
You can voice dial by saying the name of the contact.
To mak e a c a l l
1. From standby, press and hold the upper or lower side
volume key.
2. Release the key, lift the phone to your ear, and listen for
the tone.
3. After the tone, say a name, for example “John”. The
name is played back to you.
4. If you have several numbers for that contact, after a
second tone, say the number type, for example, “home”.
The number type is played back to you, and the call is
connected.
From standby, you can also initiate voice dialing, voice
profiles and voice control of voice memos by:
• Pressing and holding the upper or lower side volume
key.
• Pressing the handsfree button (when using a portable
handsfree device).
• Saying the Magic Word. See “The Magic Word” on
page 46.
Voice answering
You can answer or reject incoming calls by using your
voice, when using a portable handsfree or a car
handsfree kit.
To turn on voice answering and record voice
answer commands
1. Scroll to Settings, Voice control, Voice Answer.
2. Select On.
3. Select or deselect the accessories you want to be able to
use with voice answering by pressing
CHECK or
UNCHECK.
4. Instructions appear.
5. Lift the phone to your ear, wait for the tone and say
“Answer”, or another word. If the recording sounds OK,
press
YES. If not, press NO and repeat step 5.