User Manual

Basics

T608 Preliminary

Charging the Battery

It is vital that you use only approved chargers. Use of

unauthorized accessories could damage your phone and

invalidate your warranty.

To use the charger provided with your phone:

1. Plug the charger into a wall outlet.

2. Insert the other end of the

charger into the charger jack

on the phone. The yellow ring

around the jack corresponds

with the yellow tip on the

charger.

䊳 Do not attempt to insert anything else into the

charger jack.

䊳 While charging, the and icons will

alternate in the display.

Note: It may take up to 30 minutes before the battery charging icon

appears in the display.

3. Wait approximately 4 hours or until the icon

indicates that the battery is fully charged. If you do not

see the battery icon after this time, press any key or the

joystick to activate the display.

4. Once charging is complete, unplug the charger from

the wall outlet and disconnect the charger from the

phone.

Start Here.book Page 21 Friday, January 10, 2003 1:18 PM