Camcorder User Manual
Table Of Contents
- Table of Contents
- Chapter 1 Overview
- Chapter 2 Locations and Functions of Parts and Controls
- Chapter 3 Recording and Playback
- Chapter 4 Thumbnail Search
- Chapter 5 Adjustments and Settings for Recording
- Chapter 6 Menu Displays and Detailed Settings
- 6-1 Menu Organization and Operation
- 6-2 Status Display on the Viewfinder Screen
- 6-2-1 Layout of the Status Display on the Viewfinder Screen
- 6-2-2 Selecting the Display Items
- 6-2-3 Display Modes and Setting Change Confirmation/ Adjustment Progress Messages
- 6-2-4 Setting the Marker Display
- 6-2-5 Setting the Viewfinder
- 6-2-6 Recording Shot Data Superimposed on the Color Bars
- 6-2-7 Setting the Shot ID
- 6-2-8 Displaying the Status Confirmation Windows
- 6-2-9 Confirming the Image of the Return Video Signal in the Viewfinder
- 6-3 Adjustments and Settings from Menus
- 6-3-1 Setting Gain Values for the GAIN Selector Positions
- 6-3-2 Selecting the Output Signals
- 6-3-3 Setting the Color Temperature Manually
- 6-3-4 Specifying an Offset for the Auto White Balance Setting
- 6-3-5 Assigning Functions to ASSIGN 1/2/3/4 Switches
- 6-3-6 Setting the Date/Time of the Internal Clock
- 6-3-7 Selecting the Lens File
- 6-3-8 Selecting the Aspect Ratio
- 6-3-9 Setting the CCD Scan Mode
- 6-4 Resetting USER Menu Settings to the Standard Settings
- Chapter 7 Saving and Loading User Setting Data
- Chapter 8 Setting Up the Camcorder
- Chapter 9 Maintenance
- Appendixes
- Index
Chapter 2 Locations and Functions of Parts and Controls
44
2-9 Warnings and Indications on the LCDs
2-9-2 Color LCD
Disc status, battery status and audio level
Display of remaining disc capacity, remaining battery capacity, and
audio levels on the color LCD
VDR operation status and status
indicators
VDR operation and status indicators on the color LCD
Close to full state: “DISC” flashes.
Full (disc must be replaced): “DISC” and “E” flash.
Battery status indicator
Disc status indicator
Full capacity is available.
Nearly dead: “BATT” flashes.
Dead battery (battery must be charged): “BATT”
and “E” flash.
Fully charged
Formats of video and audio
signals to be redorded.
Audio level meters
Warning display area
This shows a message if a recording fault or
condensation is detected.
For details, see 9-3 “Operation Warnings” on page
134.