Camcorder User Manual
Table Of Contents
- Table of Contents
- Chapter 1 Overview
- Chapter 2 Locations and Functions of Parts and Controls
- Chapter 3 Recording and Playback
- Chapter 4 Thumbnail Search
- Chapter 5 Adjustments and Settings for Recording
- Chapter 6 Menu Displays and Detailed Settings
- 6-1 Menu Organization and Operation
- 6-2 Status Display on the Viewfinder Screen
- 6-2-1 Layout of the Status Display on the Viewfinder Screen
- 6-2-2 Selecting the Display Items
- 6-2-3 Display Modes and Setting Change Confirmation/ Adjustment Progress Messages
- 6-2-4 Setting the Marker Display
- 6-2-5 Setting the Viewfinder
- 6-2-6 Recording Shot Data Superimposed on the Color Bars
- 6-2-7 Setting the Shot ID
- 6-2-8 Displaying the Status Confirmation Windows
- 6-2-9 Confirming the Image of the Return Video Signal in the Viewfinder
- 6-3 Adjustments and Settings from Menus
- 6-3-1 Setting Gain Values for the GAIN Selector Positions
- 6-3-2 Selecting the Output Signals
- 6-3-3 Setting the Color Temperature Manually
- 6-3-4 Specifying an Offset for the Auto White Balance Setting
- 6-3-5 Assigning Functions to ASSIGN 1/2/3/4 Switches
- 6-3-6 Setting the Date/Time of the Internal Clock
- 6-3-7 Selecting the Lens File
- 6-3-8 Selecting the Aspect Ratio
- 6-3-9 Setting the CCD Scan Mode
- 6-4 Resetting USER Menu Settings to the Standard Settings
- Chapter 7 Saving and Loading User Setting Data
- Chapter 8 Setting Up the Camcorder
- Chapter 9 Maintenance
- Appendixes
- Index
Chapter 3 Recording and Playback
54
3-4 Recording Video Signals from External Equipment
The b mark on the left of “REC VIDEO SOURCE”
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
6
Turn the MENU knob to display “EXT”.
7
Press the MENU knob.
The z mark on the left of the selected item changes to
a b mark and the ? mark on the left of the setting
changes to a z mark.
Note
During i.LINK DV stream input, the image on the
viewfinder screen and the color LCD may occasionally
show an overlapped frame or skipped frame, but this does
not affect the recording on the disc.
During i.LINK DV stream input, the audio within the DV
stream is recorded as the audio input.
3-4-2 Recording Analog Composite
Signals (With the CBK-SC01
Installed)
Installing the CBK-SC01 Composite Input Board (not
supplied) in the camcorder enables you to record analog
composite signals from external equipment connected to
the GENLOCK IN connector.
To make a setting for recording analog composite signals
from external equipment, proceed as follows.
1
Display the SOURCE SEL page on the screen.
For the operation, see 3-4-1 “Recording a DV Stream
From External Equipment” on page 53.
2
Move the b mark to “EXT VIDEO SOURCE”, and
press the MENU knob.
3
Turn the MENU knob to display “CMPST”.
This ends the setting.
When you input analog composite signals to the
GENLOCK IN connector of the camcorder, these
signals are displayed on the viewfinder screen and the
color LCD, and can be recorded on the disc.
Note
Even when the GENLOCK ON/OFF item is set to “OFF”
on the GENLOCK page of the MAINTENANCE menu,
the camcorder is automatically synchronized with the
external reference video signal when the external video
signal is input to the GENLOCK IN connector in EXT
mode. When the setting is switched to CAM mode, or
when no signals are input to the GENLOCK IN connector
even in EXT mode, the camcorder is reset to the original
setting.
21 SOURCE SEL TOP
REC VIDEO SOURCE: EXT
EXT REC CONTROL : OFF
I.LINK SBP2 MODE: DSABL
21 SOURCE SEL TOP
REC VIDEO SOURCE: CAM
EXT REC CONTROL : OFF
I.LINK SBP2 MODE: DSABL
EXT VIDEO SOURCE: ILINK
EXT OUTPUT DELAY: SYNC
SET UP REMOVE : 0.0%