User's Manual

20 Personalizing your phone
Note: To send a ring signal or melody in a text
message, see “To insert an item in a text message” on
page 50.
Receiving melodies
You can receive a sound or melody via IR, Bluetooth
wireless technology, SMS or MMS, or download it via
WAP. When you receive the sound or melody, press
YES to save it in My sounds.
If you use infrared make sure that the infrared ports
are facing each other.
Increasing ring
You can choose a ring signal that rises in steps from
the lowest volume to the highest.
• To turn increasing ring On or Off, scroll to Settings/
Sounds & alerts/Increasing ring.
Specific ring signals for personal calls
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines. Line 1 and Line 2 are displayed instead
of Voice calls.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a Personal
ring signal to up to ten callers.
To set a specific ring signal for a caller
1. Scroll to Phone book,
YES, Personal rings, YES, Add
new?,
YES.
2. Enter the first letter of the contact name,
YES.
3. Select a contact,
YES.
4. Select a ring signal,
YES.
Sounds & alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
To set the vibrating alert
1. Scroll to Settings,
YES, Sounds & alerts, YES, Vibrating
alert,
YES.
2. Select the setting you want,
YES.