User's Manual

26 Personalizing your phone
Specific ring signals for personal calls
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a
personal ring signal to up to ten callers, or to a group
of callers.
If the last seven digits of a caller’s number
correspond to a number you have specified, then that
caller’s ring signal is used.
You can include question marks in a phone
number. For example, 012345??? means that calls
from phone numbers between 012345000 and
012345999 will have the same personal ring signal.
Press and hold to insert a question mark.
To set a specific ring signal for a caller
1. Scroll to Settings,
YES, Sounds & alerts, YES, Ring
signals,
YES, Personal rings, YES, Add new?, YES.
2. Enter the caller’s number and press
YES.
Press to recall a number from the phone book.
3. Select a ring signal and press
YES.
To set a specific ring signal for a defined group
of callers
1. Scroll to Settings,
YES, Sounds & alerts, YES, Ring
signals,
YES, Personal rings, YES, Add new?, YES.
2. Press to recall a defined group from the phone
book.
3. Select a ring signal and press
YES.
Composing your own ring signal
The melody editor enables you to compose your own
ring signals.
To edit or compose a ring signal
1. Scroll to Settings,
YES, Sounds & alerts, YES, My
melodies,
YES.
2. Select one of the melodies and press
YES.
3. Select Edit and press
YES.
4. Use the keypad to enter a note.
• To add a new note move the
cursor using to the dotted
frame and press the keypad.
• When a note is entered you can
change the note in the
following ways:
T600.book Page 26 Friday, August 23, 2002 4:43 PM