User's Manual

Personalizing your phone 27
•press to change up one note.
•press
to change down one note.
•press
to increase the octave.
•press
to decrease the octave.
•press
to change to a longer note.
•press
to change to a shorter note.
•press
to change to a flat or sharp note.
•press
to turn the vibration on or off.
•press
to change the duration specifier.
•press
to add a new note above the current
note.
•press
to increase or decrease the volume.
•press
to delete the selected note.
• Scroll using or from one note to the next.
The highlighted line on the display shows which note
is selected.
5. Press
YES to listen to the melody.
6. Press
YES again to save the melody or NO to continue
editing the melody.
Tip: You can play a melody from the
menu.
To create a repeat block of notes
1. Select the starting note of the repeat and press .
2. Select the ending note of the repeat and press .
3. Press
to change the repeat count 1-9 times, or
to continually repeat.
Tip: You can add repeat blocks from the
menu.
To set the volume, beat and style for a melody
1. Scroll to Settings,
YES, Sounds & alerts, YES, My
melodies,
YES.
2. Select a melody and press
YES.
3. Select a setting and press
YES.
• Set volume, to decrease or increase the volume.
• Set beat, to decrease or increase the beats per minute.
• Set style, to select a style.
4. Enter your setting and press
YES to save the setting.
Note: The volume of the melody is dependent upon
the main volume settings.
To edit the melody name and composer
1. Select the melody to edit from the Settings/Sounds &
alerts/My melodies menu and press
YES.
2. Scroll and select Melody info and press
YES.
T600.book Page 27 Friday, August 23, 2002 4:43 PM