User's Manual

50 Call time and call cost
Call time and call cost
During a call, the duration of the call is shown in the
display. If you subscribe to cost information, the call
cost (or the number of call units) is displayed instead.
Call time
You can check the duration of your Last call,
Outgoing time, and the Total time.
To check the call time
1. Scroll to Call info,
YES, Call timers, YES.
2. Select a call time and press
YES.
• Select Reset timers if you want to reset the call time
counter.
Call cost
You can check the cost of your Last call and
the Total cost of your calls.
To check the call cost
1. Scroll to Call info,
YES, Call costs, YES.
2. Select a call cost and press
YES.
• Select Clear total cost to reset the counter.
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the ‘tariff’ function to specify the price
per call unit. If you do not specify a price per call
unit, the number of call units is displayed instead.
To enter the price per call unit
1. Scroll to Call info,
YES, Call costs, YES, Set tariff,
YES.
2. Enter your PIN2 and press
YES.
3. Select Change tariff and press
YES.
4. Enter the code for the currency you want, (for
example GBP for Pounds Sterling), and press
YES.
5. Enter the price per call unit and press
YES.
To enter a decimal point, press .
Credit limit for calls
If supported by your network and your subscription,
you can enter a total amount of money that can be
used for making calls. When the amount reaches
zero, no more calls can be made. Please note that the
credit limit is only an estimated value.
T600.book Page 50 Friday, August 23, 2002 4:43 PM