User's Manual

52 Using the WAP browser
To enter the WAP settings manually
1. Scroll to WAP services,
YES, WAP settings, YES.
2. Select a WAP profile and press
YES.
3. Scroll to Gateway,
YES, User id, YES.
4. Enter the User id to your gateway and press
YES.
5. Select Password and press
YES.
6. Enter the password to your gateway and press
YES.
7. Select Data mode and press
YES.
8. Select the data mode conn.less / conn.oriented and
press
YES.
9. Select Data address and press
YES.
10. Enter the IP address to your gateway and press YES.
11. Press
NO to go back one level in the menus.
12. Scroll to GSM data,
YES, Phone number, YES.
13. Enter the phone number you use with your GSM data
connection and press
YES.
14. Scroll to Dial type and press
YES.
15. Select Analogue or ISDN connection and press
YES.
You have now entered the settings you need to start
browsing the Internet. You may also need to enter the
following information.
16. Scroll to User id and press
YES.
17. Enter the User id for your GSM data connection and
press
YES.
18. Scroll to Password and press
YES.
19. Enter the Password for your GSM data connection
and press
YES.
To start browsing
1. First select the WAP profile you want to use. Scroll
to WAP services,
YES. Select profile, YES.
2. Then do one of the following:
•Open your homepage (Sony Ericsson Mobile
Internet is default).
•Enter the address of a WAP site. Select Enter
address and press
YES. Enter the WAP address.
•Go to one of your bookmarks.
Tip: If the WAP address starts with http://, you do
not need to enter this prefix. You only need to enter
the prefix if it starts with something else, for example,
ftp://.
To change homepage
1. Scroll to WAP services,
YES, WAP settings, YES.
2. Select the WAP profile you want and press
YES.
3. Select Edit homepage and press
YES.
4. Enter a name for this homepage and press
YES.
T600.book Page 52 Friday, August 23, 2002 4:43 PM