User Manual

36
Before Using the Terminal
･
If regularity in your charging habit cannot be found,
Battery Care does not start because incomplete of
the learning and normal charging will be performed.
･
If you remove charging equipment during Battery
Care charging, the terminal may not be fully charged.
To charge the battery using the Desktop
Holder SO27 (optional) and AC Adapter 06
(optional), operate the following steps.
･
Depending on the thickness of the terminal,
please install the attachment that was
included with the desktop holder before
charging. Placing the terminal on the desktop
holder without the attachment on it may
damage the USB Type-C jack or other parts.
･
When you do not attach a commercially
available case or cover to the terminal, attach
the Attachment 52B (P.37) to the desktop
holder to use.
1
Insert a Type-C plug of the AC
adapter into the charging jack on
the back of the desktop holder.
2
Unfold the power plug of the AC
adapter and insert it into a power
outlet. Then place the terminal on
the desktop holder.
･
A sound to indicate the start of
charging is heard, and the notification
LED of the terminal turns on (P.47).
3
When charging is complete,
holding the desktop holder, lift the
terminal up to remove.
4
Remove the power plug of AC
adapter from the outlet, and then
remove the Type-C plug from the
desktop holder.
Charging with desktop holder