User Manual

48
Before Using the Terminal
A status bar appears at the top of the screen.
In the status bar, the terminal status and
notification are displayed. Notification icons
appear on the left side, and status icons
appear on the right side of the status bar.
The main status icons displayed on the status
bar are as follows.
*1 is always displayed when the terminal is
connected with LTE.
Status bar
Status icon
Signal strength
―
International roaming enabled
―
Out of service
―
HSPA available
―
Communicating in HSPA
―
3G available
―
Communicating with 3G
―
4G (LTE) available
*1
―
Communicating with 4G (LTE)
*1
―
Connected to Wi-Fi P.155
Communicating in Wi-Fi P.155
Status bar
Notication icon Status icon
Connected to a Wi-Fi network with
no access to the Internet. The Wi-Fi
signal is poor.
P. 1 5 6
Wi-Fi tethering is set P.160
Bluetooth function ON P.192
Connected to Bluetooth device P.193
Airplane mode activated P.154
Silent mode (Vibrate) ON P.44
Silent mode (mute) is set/Do not
disturb function
*2
is set to [Alarms
only] or [Priority only]
P. 4 4
Do not disturb function
*2
is set to
"Total silence"
―
Speakerphone ON P.89
Microphone put on mute P.89
Alarm is set P.149
NFC Reader/Writer, P2P function ON P.195
Positioning with GPS
―
Connected to VPN P.162
Battery status
―
The battery is charging P.34
Battery is low
―
Charging is required
―
PUK code locked, or docomo nano
UIM card not inserted
P. 3 1 , P. 1 7 4