User Manual

To turn on the device
It is important to use the provided USB Type-C charger
when charging your device, as other types of USB
char
gers may damage or not charge your device.
1
Remove the slot cover as show in the illustration.
2
Plug the power cable into its slot as shown in the
illustration.
3
Gently reattach the slot cover
.
4
Plug the charger into the power outlet. The LED indicator
next to the power cable slot lights up briefly. Make sure to
remove the protection film from the front of the device
before using it.
5
Press and hold the power key until the volume buttons light
up.
The projection starts approximately 30 seconds after the
device is turned on. T
o turn off the device, press and hold
the power key then tap power off on the touchscreen.
To project the touchscreen
10:35