INSTRUCTION MANUAL 17.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/so01k/index.html Thank you for your purchase of "SO-01K". For proper use, read this manual carefully before and while you use the SO-01K. * The latest information can be downloaded. The URL and contents are subject to change without prior notice.
Operation descriptions In this manual, keys (P.30) and key icons (P.45) are described with O, k, b, h, n. And operations for selecting icons or items in the key operations on the screens are described as follows. Description Press and hold k for at least 1 second. On the TV watching screen, b. From the Home screen, u [Settings]u[About phone]. ･ In this manual, explanations for "docomo LIVE UX" as Home application are provided (P.71).
Supplied accessories ･ ･ (Notes on usage, Safety/Handling precautions) (In Japanese only) SO-01K (with warranty) ･ ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-01K のご利用にあたっての注意事項 安全上／取り扱い上のご注意 TV antenna cable SO01 You can check or purchase optional accessories compatible with the terminal (optional) in the DOCOMO online shop. https://www.mydocomo.com/onlineshop/ options/index.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ■ Handling precautions. . . . . . . . . . . . . . . 17 ■ Waterproofness/Dustproofness . . . . . 24 Before Using the Terminal . . . 30 Part names and functions................................................30 docomo nano UIM card....................................................
Apps . . . . . . . . . . . . . . . . . . . . . . 120 External device connection. .202 d メニュー (dmenu)............................................................ 120 dmarket.................................................................................... 120 Play Store................................................................................. 121 Osaifu-Keitai........................................................................... 122 TV..........................................................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach, in locations with weak radio wave condition, or out of LTE/ FOMA service area. The services may not be available on the upper floors of high-rise apartments or buildings, even if there are no obstructions around you.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
For using services and applications provided by the third party's including the applications provided by Google Inc., confirm the terms and conditions specified by Google or the providers. DOCOMO assumes no responsibility for any malfunctions resulting from the services and applications. ･ When a license agreement screen etc. appears, follow the onscreen instructions. ･ Applications and service contents are subject to change without prior notice.
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient. *2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or longterm hospital attendance as an outpatient.
Don’t Don’t Don’t No disassembly Do not splash sand, soil or mud, or do not directly place the equipment on them. Also, do not touch the equipment with hands with sand etc. adhered. Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness/dustproofness, see the following. ⇒ P.24 "Waterproofness/Dustproofness" Do not charge the terminal when it is wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.).
Do Do Do If charging does not finish after specified time, stop charging. Failure to do so may cause fire, burns, injury, etc. due to overcharge etc. Power off the terminal before you step into a place where flammable gas generates such as gas stations, or a place where dusts are generated. Stop charging if you charge the battery. Using the terminal in a place where flammable gas generates may cause explosion, fire, etc.
2. Handling the terminal DANGER Don’t Don’t Do Do not throw the terminal into fire or apply heat. Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery. Don’t Don’t Do not put excessive force such as sticking a nail (sharp object) into the terminal, hitting it with a hammer (hard object), or stepping on it. Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.
Do Do Do Always keep the terminal away from your ear when you talk with hands-free set, while the ringtone is loudly sounding, or in standby mode. Also, when you play game, play back videos or music, etc. connecting the earphone/ microphone, etc. to the terminal, adjust the volume adequately. Loud sound is emitted from the terminal when calling with hands-free set. Even in standby mode, a ringtone or an alarm sound may sound suddenly.
CAUTION Don’t Don’t Don’t Don’t When using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily. Failure to do so may cause accident such as injuries. If the internal substance is leaked due to damage of the display, do not get it on your skin such as face, hands, or cloths etc. Doing so may cause injury etc. on your eyes or skin. If the internal substance etc.
Don’t Do not use the adapter in a humid place, such as a bathroom. Doing so may cause fire, burns, electric shock, etc. Don’t DC adapter is only for a negative ground vehicle. Do not use DC adapter for a positive ground vehicle. Doing so may cause fire, burns, electric shock, etc. Don’t Don’t Don’t Don’t Don’t Do not touch the adapter if you hear thunder. Doing so may cause electric shock etc. Don’t Do not put an excessive force to the connection part with the adapter connected to the terminal.
Do Do When you disconnect the power plug from an outlet or accessory socket, do not apply excessive force it such as pulling the cord of the adapter. Instead, hold the adapter to disconnect. Pulling the cord may damage the cord and it may cause fire, burns, electric shock, etc. When plugging/unplugging an adapter into/from the terminal, plug/unplug the adapter straightly toward the jack without applying excessive force such as pulling the cord etc.
Do Do Do If you need to use electronic medical equipment other than implantable cardiac pacemaker or implantable cardioverter defibrillator outside medical facilities such as treating at home, check with the relevant medical electronic equipment manufacturer whether the operation may be affected by radio waves. The radio waves from the terminal may affect the performance of electronic medical equipment.
Part Waterproof rubber of the cover of docomo nano UIM card/microSD card slot docomo nano UIM card/ microSD card tray TV antenna cable : headset jack (top surface), connector plug (top surface) TV antenna cable : headset jack (body), connector plug (body), cable TV antenna cable : connector plug (metal part) Material Surface treatment Silicon rubber ― Handling precautions ■ Common precautions ･ Polyacetal resin ― Polypropylene ― resin The adapter, the docomo nano UIM card, and the TV antenna cable ar
- Drops of water or dirt left on the display may cause stains. - Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration. ･ Clean the jacks or the fingerprint sensor occasionally and use the terminal in a clean state. If the jack etc. is dirt, you may not use the terminal normally. When cleaning, be careful not to damage the jack etc. ･ Make sure to use the terminal without excessive force.
･ Do not expose the camera lens under direct sunlight. ･ If you do so, some of the elements may melt or become faded. ･ ･ Do not subject the fingerprint sensor to strong impact or scratch it. Doing so not only may cause a malfunction of the fingerprint sensor, but authentication may become unavailable. ･ While the microSD card is being used, do not take the card out and do not turn off the terminal. Doing so may cause data loss or malfunction.
■ Adapter precautions Charge the battery in an environment with the proper ambient temperature (5℃ to 35 ℃ ). ･ Do not charge in the following places. ･ - Places that are very humid, dusty or exposed to strong vibrations - Near land-line phone or TV/radio The adapter may become hot during charging. This condition is not abnormal. ･ When using the DC adapter for charging, do not turn off the vehicle engine. ･ Doing so may cause the exhaustion of vehicle battery.
･ Do not insert a docomo nano UIM card into the terminal if a label or seal is attached to the card. : The full band between 2400 MHz and 2483.5 MHz is used and the band of the mobile identification device can be avoided. Available channels vary depending on the country. For use in an aircraft, contact the airline beforehand. Doing so may cause malfunction.
■ Wireless LAN (WLAN) precautions ･ Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio waves reach. However, without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to configure necessary security settings on your own judgment and responsibility.
■ FeliCa® and NFC reader/writer function precautions FeliCa and NFC reader/writer, P2P function of the terminal use weak waves requiring no licenses for radio stations. ･ They use 13.56 MHz frequency band. When the other FeliCa or NFC reader/ writer, P2P function is used in the surroundings, keep the terminal away sufficiently from them. Before using, confirm that there are no radio stations using the same frequency band nearby. ･ For use in an aircraft, contact the airline beforehand.
Waterproofness/ Dustproofness SO-01K provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the cover of docomo nano UIM card/microSD card slot firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter. *2 IPX8 means that a phone keeps functioning after SO-01K is slowly submerged to depth of 1.
･ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.28). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the cover of docomo nano UIM card/microSD card slot Put your tip of finger (fingernail) into the groove and draw the cover out in the arrow direction. If the cover of docomo nano UIM card/ microSD card slot is opened and closed, the terminal restarts. ■ Closing the cover of docomo nano UIM card/microSD card slot Push the tray all the way in the arrow direction and firmly press parts and make sure that there are no gaps between the terminal and the cover.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not move the terminal in water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes. ･ When you use the terminal in swimming pool, obey rules of the facility. ･ The terminal does not float on water. ･ Do not leave water on the terminal.
c DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty. Draining water from the terminal When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.
d Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ･ Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ･ Do not wipe off water remaining in gaps directly with a cotton swab etc. ･ Dry the terminal naturally for about 3 hours at room temperature. ･ Never connect a Type-C plug if the terminal is wet.
Part names and functions b v k l m n o c d e p s q w Top x y h t a Bottom i f j g u r Left Front Right a docomo nano UIM card/microSD card slot b Notification LED → P.50 c Front camera lens d Earpiece/speaker e Proximity/light sensor : Detects a face getting closer to the touch screen during a call and turns it off to prevent misoperation, and helps with automatic screen brightness control. f Touch screen → P.
x y If a microSD card is installed, be sure to unmount it (P.35) (to disable reading/writing) before installing or removing the docomo nano UIM card. ･ Opening/closing the cover of docomo nano UIM card/microSD card slot (P.25). Microphone USB Type-C jack *1 The antenna is built into the terminal. Covering around the antenna with your hand may affect the quality of communications. *2 A sticker bearing the CE mark, FCC ID, IMEI information, etc. is attached.
Inserting docomo nano UIM card 1 2 4 ･ Draw the cover of docomo nano UIM card/microSD card slot (P.26). Pull the tray straight out from the terminal. 5 3 With the IC side facing up, place the docomo nano UIM card on the tray. Hold the terminal horizontally and insert the tray with the card into the terminal and push it straight. Be careful about the direction to insert of the tray.
Removing docomo nano UIM card 1 2 Draw the cover of docomo nano UIM card/microSD card slot (P.26). Pull the tray straight out from the terminal. (P.32). 3 Remove the docomo nano UIM card from the tray. 4 Insert the tray into the terminal and push it straight. ･ Be careful about the direction to insert of the tray. 5 Firmly push the tray into the end and make sure that there are no gaps between the terminal and cover (P.32).
･ The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate. 3 Set microSD card into the tray with the contacts side facing up. ･ Set a microSD card surely into the tray not come off. Installing microSD card ･ Opening/closing the cover of docomo nano UIM card/microSD card slot (P.25). 1 Draw the cover of docomo nano UIM card/microSD card slot out (P.
5 Push the tray into the end and firmly press parts and make sure that there are no gaps between the terminal and the cover. ･ appears on the status bar and writing to the microSD card is enabled. Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ･ Opening/closing the cover of docomo nano UIM card/microSD card slot (P.25). 1 2 3 4 Draw the cover of docomo nano UIM card/microSD card slot out (P.26).
7 Firmly push the tray into the end and make sure that there are no gaps between the terminal and the cover (P.35). CE mark and FCC ID 1 Open the docomo nano UIM card slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight. Charging The internal battery is not fully charged at the time of purchase. ･ Estimated charging time (P.
Before charging It is recommended to use the AC Adapter 06 (optional) for charging. For details on the AC Adapter 06, refer to the AC Adapter 06 manual. ･ The AC Adapter 06 is compatible with 100V to 240V AC. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal. ･ Use a compatible AC adapter or USB cable A to C for charging.
■ Switching normal charging From the Home screen, u[Settings]u[Battery]u[Battery Care] uTap to turn off Battery Care. ･ To temporarily stop Battery Care charging and switch to normal charging, drag the status bar down and tap the notification of Battery Care charging. ･ 1 Insert a Type-C plug of the AC adapter into the charging jack on the back of the desktop holder. 2 Unfold the power plug of the AC adapter and insert it into a power outlet. Then place the terminal on the desktop holder.
3 4 When charging is complete, holding the desktop holder, lift the terminal up to remove. Attaching/Removing the attachment Remove the power plug of AC adapter from the outlet, and then remove the Type-C plug from the desktop holder. 1 ❖Note ■ 2 Connect the terminal correctly. Wrong connection may cause damage. ･ A terminal mounted on the desktop holder may be damaged if pressed hard against the holder.
Charging with AC adapter 3 When using AC Adapter 06 (optional) for charging, do the following procedures. 1 Insert the Type-C plug of the AC adapter horizontally into the USB Type-C jack of the terminal. 2 Unfold the power plug of the AC adapter and insert it into an outlet. ･ A sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.50).
If the installation screen for the terminal's driver software appears on your PC, please wait a moment for the installation to complete. ･ When "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL]. ･ When the "Use USB to" confirmation screen appears, tap [CANCEL]. ･ Charging with a PC When charging using USB cable A to C 01 (optional), do the following procedures. 1 Insert a Type-C plug of the USB cable A to C horizontally into the USB Type-C jack of the terminal.
Turning power off Turning power on/off Turning power on 1 Press and hold O for at least 1 second. The terminal vibrates and the lock screen appears after a while. ･ When you first turn on the power and " ようこそ (Welcome)" is displayed, follow the onscreen instructions to make initial settings (P.43). ･ 1 Press and hold O for at least 1 second. 2 [Power off]. Using a menu when pressing and holding O at least 1 second The following operations are available from the menu. P.42 Restarts the terminal. P.
Canceling the screen lock The lock screen appears when you turn the power on or press O to exit sleep mode. 1 Swipe (or flick) up/left on the lock screen. ･ Alternatively, touch O to cancel the screen lock. ❖Information On the lock screen, swipe (flick) or to use the phone or the camera. ･ You can change screen unlock method (P.181). ･ Once you register your fingerprint in the Fingerprint Manager, you can use fingerprint authentication to unlock the screen (P.182).
2 When the initial settings screen for docomo services appears, mark "Agree to all"u[NEXT]. ･ 3 Follow the onscreen instructions to make the following settings. - d ACCOUNT settings - docomo cloud settings - Install all apps setting - "Anything else?" settings When the setup completion screen appears, [FINISH]. ❖Information The displayed setting items may differ depending on operation of the terminal. ･ Some settings can be changed later (P.71, P.159, P.181, P.182, P.186, P.187, P.190, P.191, P.193, P.
■ Swipe (Flick) Touch the screen and flick up/down or left/ right. ■ Drag Touch the screen, drag to the desired position and release the finger. ■ Basic key icon operation Scroll When whole content cannot be displayed, flick up/down/left/right displayed content to scroll (move) the display position. b h n b Back h Home n Task Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. Go to the Home screen.
Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 3 From the Home screen, u[Settings]u[Display]. [When device is rotated]. [Rotate the contents of the screen]. ･ Select "Stay in portrait view" to lock the screen in portrait orientation. ❖Information Some displayed screens are fixed in portrait orientation or landscape orientation.
Setting silent mode (Mute) 1 2 3 Press the volume up or down key. Tap . Press the volume down key. The icon in the volume control bar changes to (gray). ･ Tap [END NOW] on the volume control bar to cancel silent mode (mute). ･ Silent mode (mute) can also be set by selecting the "Alarms only" or "Total silence" of the Do not disturb function in the Quick settings panel (P.54). Before using the Do not disturb function, tap and set "Do not disturb" to the available quick setting tool.
Setting Emergency mode In case of emergency such as disaster, restrict functions to save the battery power. 1 Press and hold O for at least 1 second. 2 [Emergency mode]uConfirm "IMPORTANT INFORMATION"u Mark "I have read the important information"u[TURN ON]. ･ Selecting an application to use If you have more than one application available when sending an email or displaying an image, an application selection screen appears.
❖Information Some tasks may require you to select an application each time, with "JUST ONCE" or "ALWAYS" not displayed on an application selection screen. ･ To deselect the application set to "ALWAYS", from the Home screen, u[Settings]u[Apps]uTap the application you want to deselectu[Open by default] u[CLEAR DEFAULTS].
Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc.
Connected to a Wi-Fi network with no access to the Internet. The Wi-Fi signal is poor.
Call is incoming/dialing/during a call ― Call is on hold P.94 Missed call P.96 Message is recorded in Answering P.91, P.96 Machine New voice mail ― Event notification for Schedule P.152 Stopwatch is running/Timer is in use P.153, P.154 Alarm is in snooze mode or sounding P.153 Playing a track with Media Player P.147 Playing a truck in Music ― Watching TV*1/Notification of P.129 reserved watching Recording TV*1/Notification of P.132 reserved recording USB device is connected P.
e Notification panel When notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. 1 Drag the status bar downwards. ab c e d f g Open/Close the notification ･ Open the notification to fully display the content or operation menu. ･ If the icon may not be displayed, the notification may be opened by dragging the notification down or pinching (P.45) on the notification.
d Quick settings panel You can open the quick settings panel to enable or disable functions. 1 Drag the status bar downwards with two fingers. a b cde f a b Name of network operator Users ･ Add or switch a guest/user who use the terminal, or delete a guest. ･ Tap [MORE SETTINGS] to display "Users" in the Settings menu (P.185). c EDIT ･ Display the edit screen to add, delete or rearrange the quick setting tools.
❖Information Touch and hold the quick setting tool to display each setting screen. ･ The quick setting tool may be automatically added depending on the operation of the terminal. ･ You can also open the Quick settings panel by dragging down the Notification panel or dragging down the status bar on the lock screen. ･ To close the Quick settings panel, tap b or drag the panel up. ･ Xperia™ Home screen This section describes the Home screen displayed when the home application is set to "Xperia™ Home".
❖Information You can add widgets and shortcuts, change the wallpaper, and perform other tasks by touching and holding an area of the Home screen where no icons are displayed or by pinching in on the Home screen. ･ To change the page of the start screen for operations, display the page you want to change to and touch and hold the area of the Home screen where no icons are displayeduTap displayed in the upper left of screen. However, when "Google Now™" (P.58) is set to ON, a start screen cannot be changed.
Adding a shortcut to the Home screen ❖Information You can add shortcuts of contact, etc. to the Home screen. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Widgets]u[Shortcuts]. Select the shortcut. ･ When a data selection screen or setting screen appears, follow the onscreen instructions. To move an icon into a folder, touch and hold the icon on the Home screenuDrag it over the folder.
Changing theme You can change themes for the Home screen, wallpaper of the lock screen, etc. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Themes]. Select the themeu[APPLY THEME] u[OK]. ❖Information ･ Tap [GET MORE THEMES] in Step 3 to download themes and add. Setting Home screen 1 Touch and hold an area of the Home screen where no icons are displayed. 2 [Settings].
Media Simple Home screen Set Simple Home to use Home screen and the setting menu limited to basic functions. 1 From the Home screen, u[Settings]u[Apps]. 2 u[Home app]u[Simple Home] u[OK]. 3 [OK]. ■ ･ To set the font size to "Largest", mark "Set font size to Largest". Applications on the Simple Home screen Maps Chrome Settings My Apps Tools Contacts Calendar Clock Calculator Gmail Play Store d メニュー (dmenu) d POINT P.150 P.117 P.60 P.61 P.65 P.63 P.153 P.64 P.114 P.121 P.120 P.
2 ■ 1 Select a contact to save. ･ Making a call On the Simple Home screen, select a speed dialu[Call]. ･ ■ 1 The name "Speed dial" on the Simple Home screen will change to the name saved in the "Contacts" application. How to send a message (SMS) (P.107) How to send email (P.111) How to send Gmail (P.114) ❖Information ･ 1 On the Simple Home screen, [Settings]. My profile Display Wallpaper Operation during a call (P.
Sound Silent/Vibrate mode Ringtone Vibrate on touch Set silent mode. Set ringtone. Set whether to vibrate the terminal for some operations such as specified software key operation. Touch sounds Set whether to emit sound when selecting menu. Vibrate when Set whether to vibrate the ringing terminal when receiving a call. Customize Change apps P.61 Home Reorder apps Reset Display Settings menu on More settings the standard Home screen (P.158). Exit Simple Home Change to the standard Home screen.
c Xperia™ Application screen This section describes the application screen displayed when the home application is set to "Xperia™ Home". ･ Switching Home application (P.71) From the Home screen, tap 1 a . d Current displayed position ･ Display the number of pages and current screen position. Flick the application screen left or right to switch sheets. ･ The leftmost sheet is the application search screen.
遠隔サポート (Enkaku support) An application for using " あんしん遠隔サポート (Anshin Enkaku Support)". " あんしん遠隔サポー ト (Anshin Enkaku Support)" is a service that allows staff of the Call center to support the terminal operations by remote-checking the display of your terminal. → P.221 Osaifu-Keitai*2 Use Osaifu-Keitai services. → P.
Data Copy An application that allows you to transfer data when changing the model, back up to/restore from a "microSD card" or the "Data Storage BOX (Cloud)). → P.154 データ保管 BOX (Data Storage BOX)*4 An application for using Data Storage BOX. Data Storage BOX is a service which allows you to upload files to easily manage them in the cloud. TV Watch TV programs. → P.127 電子書籍 Reader by Sony (e-books Reader by Sony)*5 Purchase books or other content at the "Reader Store", Sony's eBooks store.
Hanashite Hon'yaku *1 An application for translating spoken words into the listener's native language. This allows you to enjoy talking with people who speak languages other than your own. Video Downloads the "Video & TV SideView" application. After installation and when selected, the "Video & TV SideView" application launches and allows you to play videos saved to internal storage or a microSD memory card.
dmarket dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other e-commerce sites. → P.120 d メニュー (dmenu) An application shortcut for "dmenu". In dmenu, you can easily access sites recommended by docomo, as well as convenient applications. → P.120 Duo*3 An application that allows you to make video calls. Email*2 Send and receive emails. Multiple accounts are available. → P.
McDonald's An official application from McDonald's. Get the latest information and obtain coupons that can be used in stores. Messenger*6 Send messages or make calls or video calls to the contact of the mobile phone or the friend/ group of Facebook. Movie Creator Automatically creates highlight movies from the pictures and videos you have taken. Select pictures and videos to manually create a highlight movie. Save highlight movies as video files to share them to other people.
Adding an application to the Home screen Add shortcuts of application to the Home screen. 1 On the application screen, touch and hold the icon to add to the Home screen. For the application icons in a folder, drag out from the folder. ･ Touch and hold the folder to add the folder containing the application shortcuts to the Home screen. ･ 2 Drag it to "Add to home screen" displayed at the top of the screen. ･ When the Home screen is displayed, drag it to a position to locate the shortcut.
Adding a folder to the application screen When the order of application icons is set to "Own order" in the option menu (P.62), you can manage your application icons on the application screen by putting them in folders. 1 On the application screen, touch and hold an application iconu Drag it over another one. ❖Information To move an icon to a folder, on the application screen, touch and hold the iconuDrag it over a folder.
Task manager Display recently used applications as thumbnails to confirm, open, switch between, or close them. 1 n. ･ Applications are displayed as thumbnails. ❖Information Tap a thumbnail to open or switch the application. Although, depending on the displayed thumbnails, the application may not accessible. ･ To delete the application thumbnail, flick the thumbnail left or right or tap [×] displayed at the upper right of the thumbnail.
❖Information ･ ･ ･ ･ ･ The application windows in the split screen can be displayed up and down in the portrait view and left and right in the landscape view. The application window displayed in the lower part (right part for the landscape view) can be switched. To switch the application window, tap and select the application thumbnail, or tap h to activate the application.
Searching information in the terminal and web pages Enter a word in the search box to browse the information in the terminal or on the Internet. 1 From the Home screen, tap the Google search widget. ･ Enter a search word by voice. 1 From the Home screen, tap the Google Search widget. 2 Speak a search word to the microphone. on ❖Information ･ Alternatively, from the Home screen, tap u[Voice Search] to activate the "Voice Search" application.
Selecting the software keyboard Character entry Enter characters using the software keyboard (keyboard on the screen) which appears when you tap the character input box in a mail, phonebook, etc. ❖Information To hide software keyboard, tap displayed at the lower left of the screen. ･ A magnifier appears when you touch and hold a text, and you can enlarge the text. Switch the software keyboard to use for entering characters. 1 While entering characters, tap at the bottom of the screen.
Software keyboard For Xperia™ Japanese keyboard, the following software keyboard can be used. ･ Character input method (P.75) Keypad QWERTY Keyboard with the same key arrangement as a mobile phone. Repeatedly tap a key to select a character (multi-tap input). Flick input is also available. Keyboard with characters allocated in the same arrangement as general PCs. Enter Japanese in Roman character. Flick input is also available.
a Character input method When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word to enter from the candidate list, text can be input one after another. b Show/hide the quick tool bar. When entering on the keypad, characters assigned to a key appear in reverse order. / Appears when entering numbers, tap to switch onebyte/two-byte character. / / When entering alphabet letters on QWERTY, tap to switch lower case, capitalization and upper case.
h ･ Enter spaces. In Kana mode, highlight and select word in the candidate list. i Enter a line feed. * Appears before fixing character and fixes the character. * In some screens, , , , , etc. appear. j Return to keypad/QWERTY. ❖Information To enlarge the display area, tap in the candidate list. To display the software keyboard, tap or . ･ To return to the display before conversion after the conversion is fixed, tap displayed in つながり予測 (associative) candidate (except in handwriting input mode) etc.
Multi-tap input Tap the same key continuously to enter the assigned character. To enter a character assigned to the same key, wait for changing the color of tapped key to the original (approx. 1 second), then enter the next character (for entering the next character soon, tap to change the color of key to the original). With the key in the original color, tap to enter the last entered character again.
Quoting contacts If contacts are registered to the Contacts, you can use "Contact Picker 2.3" to enter contact information when entering characters. 1 From the character entry screen, tap in the quick tool bar. ･ [Contact Picker 2.3]uTap "CONTACTS" tab. 3 4 Select a contact to quote. Mark items to quoteu[OK]. If the quoted information is not displayed, tap the character entry field. ❖Information ･ 1 Details of the quick tool bar (P.
Setting the character entry For each input method, you can make settings related to character entry or check application information. 1 From the Home screen, u[Settings]u[Languages & input]. 2 [On-screen keyboard]uSelect the software keyboard. Tap an item displayed on the screen to set. ･ If the introduction screen etc. appears, follow the onscreen instructions. ･ ❖Information The items vary depending on the input method.
docomo LIVE UX Home screen Home screen is displayed when h is tapped. You can activate applications, widgets, etc. or display the applications screen from it. ･ Flick the Home screen left or right to switch the pages. a Managing the Home screen Adding/Moving applications etc. to the Home screen Move application icons or add widgets or folders to the Home screen. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Tap any of [Show apps]/[Show widgets]/[Create folder].
Moving an icon on the Home screen 1 2 From the Home screen, touch and hold an icon. Drag it anywhere. ･ To move to the next home screen, touch and hold the home screen and drag it to left or right. Deleting an icon from the Home screen 1 From the Home screen, touch and hold an icon. 2 Drag to "Back to apps list"/ "Remove from Home" displayed in the top of the screen. Uninstalling an application or widget from the Home screen 2 Drag to "Uninstall" displayed in the top of the screenu[OK].
Changing wallpaper 3 You can change wallpaper of the displayed home screen. ･ Display a home screen page to change in advance. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Change wallpaper]. Tap the wallpaper to change to. 4 ･ Tap [Select another wallpaper] to select from "Photos", "Images" or "Live Wallpapers". Follow the onscreen instructions to set wallpaper.
g Application screen 1 From the Home screen, tap ･ . Flick the Home screen downwards to display the application screen. a e Current position ･ Display the number of list screens and current screen position. Display by application icon/ widget list. ❖Information To close the application screen, tap b or h, or flick up the Home screen display area at the bottom of the screen.
Uninstalling an application or widget Some application icons and widgets can be uninstalled from the application screen. ･ Before uninstalling, see "Uninstalling an application or widget from the Home screen" (P.81). 1 On the application screen, touch and hold the icon of application. 2 Drag to "Uninstall" displayed in the top of the screenu[OK]. Installing "Recommends" applications Install applications recommended by DOCOMO. 1 On the application screen, [Recommends].
Display all apps Backing up and restoring the Home screen It is a function to search the applications. 1 From the Home screen, u[Display all apps]. ･ 2 All applications are displayed in a list. Tap an application. The application activates. To sort the applications, tap [By app name] in the upper right of the screen. ･ Tap to display the screen where the application is located with the application focused.
3 [Restore]. ･ If you selected "Restore from backup data list", select the data you want to restoreuTap [Restore]. Backup settings 1 On the Home screen, u u[Layout backup & Restore]. 2 Tap . Set whether to periodically back up when the home screen information for the docomo LIVE UX is updated. Multi-Device Set whether to send a notification Sync to your other devices when an application has been installed.
Setting a category 1 2 From the Home screen, u u[Display category setting]. Put marks to the categories. Changing My Magazine use setting 1 2 Checking Home application information 1 On the application screen, u[About]. ❖Information ･ If the update of docomo LIVE UX is available, "Update now" is displayed in the application information screen. Tap it to update docomo LIVE UX. From the Home screen, u u[My Magazine settings] u[My Magazine use setting]. [Use]/[Not use]u[OK].
Making/Receiving a call Making a call/video call u"Dial" 1 From the Home screen, tab. 2 Enter a phone numberuTap 3 When the call is finished, tap . To make a video call, enter a phone numberu uTap [Video call]. ･ Tap to delete the number. ･ . ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls. ･ To activate Xperia™ phone application, from the Home screen, tap u[Dial].
Emergency call Emergency call Police call Fire and emergency rescue Coast guard Phone number 110 119 118 ❖Note ･ When calling 110, 119 or 118 for emergency from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the police/fire department. Also, make a point to call in a stationary position to prevent the call from being dropped.
Entering pause (,)/(;) to send For using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call. ■ Using 2-second pause (,) Added number will automatically be sent approximately 2 seconds after a call is accepted. 3 4 Making an international call (WORLD CALL) For details on the WORLD CALL, refer to NTT DOCOMO website. From the Home screen, tab.
Answering a video call with the camera turned off Receiving a phone/video call ･ When a phone or video call comes in, the incoming call screen appears. If the screen backlight is on (except on the lock screen) or an application is running, the notification appears at the top of the screen (P.92). 1 On the incoming call screen, drag (left) to (right). ･ 2 To accept a video call, drag (left) to (right) for "Answer video". To answer a call with voice only, drag (left) to (right) for "Answer voice".
Muting the ringtone for an incoming call 1 While receiving a call, press the volume key or O. ❖Information ❖Information ･ To edit/add a message beforehand, from the Home screen, tap u u[Call settings]u[Reject call with message]uSelect an existing message or blank space and edit itu[OK].
Operations during a call On the Calling screen, you can set voice output or mute, or enter a phone number to make a call to another party. ■ Screen displayed during a voice call a b c d e f h i j k g ■ Screen displayed during a video call While on a video call, you will see the other party's image in a parent window, and your image in a child window, with the control icons hidden. Tap the screen to show the control icons. a b c h m a b Name, phone number, etc.
k More (voice call) ･ Hold a call [More]uTap [Hold call]/[Resume call] to put a voice call on hold or resume the call. ･ To hold a call, "Call waiting" subscription is required (P.97). ･ Add call [More]uTap [Add call] to add a voice call. ･ "Add call" is displayed during a 3G voice call. ･ To add a call, "Call waiting" subscription is required (P.97). l Switch camera ･ Tap this icon to switch between cameras for shooting your image.
f g Call history Incoming calls and outgoing calls are displayed by chronological order in the Recent calls screen. Showing call history 1 ■ uTap From the Home screen, "Recent calls" tab. Recent calls screen a b c d e f g Outgoing tab Voice call button ･ Tap this button to make a voice call to the corresponding phone number in the call log. h Date i History ･ The details of an incoming or outgoing calls (Outgoing, Incoming, or Missed call) are displayed.
Deleting a call history Answering Machine 1 From the Home screen, u"Recent calls" tabuTouch and hold the incoming/outgoing history to delete. 2 [Delete from call log]u[OK]. ❖Information To delete all the call history, in the Recent calls screen, tap the "All" tabu u[Delete log]uMark "Select all"u[Delete]uTap [Delete]. ･ Voice and video calls are not distinguished in the Recent calls. ･ Displaying missed calls When you have missed calls, the status bar. 1 2 appears in Drag the status bar downwards.
❖Information If there is a recorded message, is displayed in the status bar. Drag the status bar downwardsuTap the notification of the Answering Machine to display the Messages screen and you can check the recorded messages. ･ To delete recorded message, touch and hold a messageuTap [Delete]/[Delete all]u[OK]. ･ The number of messages that can be stored depends on the amount of available memory on your terminal.
Network Caller ID service display request service Call notification English guidance Remote operation settings Public mode (power OFF) setting Roaming settings Answering Machine Call Blocking Answer calls without phone number with guidance to request caller ID display. Notify incoming calls by message (SMS) while the power is off or you are out of service area. Switch the voice guidance to English or Japanese.
Suguden setting Make settings for "Suguden" which allows you to operate phone with the motions and the voice command. uTap 1 From the Home screen, . 2 [Call settings]u[Suguden setting]. Set whether to answer calls by holding up the terminal to ear. Disconnect Set whether to end a call by motion or (Motion/ voice command. Voice When the "Motion" is ON, a call can be command) disconnected by placing the terminal horizontally with the screen faced down while calling, or by shaking the terminal twice.
If the terminal is placed within a bag or pocket while on the incoming call screen, calls may be answered or disconnected for the rare occasion because that is recognized as motion performance. ･ The proximity sensor does not respond well to black objects. When answering calls, if you press the earpiece over your hair, the proximity sensor may have trouble working and may cause failure to answer the call. In this case, please press the earpiece directly to your ear.
● Disconnect (Motion) ･ When disconnecting a call with Suguden motion, it may not react (disconnect) if the speed of motion for placing the terminal facing down is fast. In that case, try the motion slowly to react (disconnect). ･ When "Disconnect" is ON, a call may be disconnected if you shake the terminal strongly even just once during the call because the action is recognized as motion performance.
Phonebook ■ Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. a d Displaying phonebook 1 ･ ･ The phonebook list screen appears. ･ ･ ･ ･ To use cloud service for the phonebook, "docomo phonebook" application is needed.
k Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. Managing phonebook Making a call/video call from the phonebook 1 Adding a new phonebook entry 1 2 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]uTap "Contacts" tabu[Register]. On the profile edit screen, enter necessary information such as name. ･ 3 To add items, tap [Add other items]. [Save]. phonebook entry you want to make a call to.
Registering a phonebook entry to Favorites 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]uTap "Contacts" tabuSelect a phonebook entry to add to Favorites. 2 On the profile screen, tap . ❖Information ･ To display phonebook entries added to Favorites, on the phonebook list screen, tap "Group" tabu [Favorites]. Using optional menu 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tab/ "My profile" tab.
■ Share Delete Set ringtone Join/Separate ■ ❖Information Profile screen Send a displayed phonebook entry with Bluetooth function, Email, etc. Delete a displayed phonebook entry. Set a ringtone for displayed phonebook entry. Join/separate displayed phonebook entry. My profile screen Send My profile Share If you change the My profile content, send the changed content to mail addresses that are registered to the docomo phonebook all at once.
Checking My profile and editing information 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[docomo phonebook]uTap "My profile" tab u[Edit]. 2 On the My profile screen, enter necessary information such as name. 3 [Save]. Importing/Exporting/Sharing phonebook entries 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]uTap "Contacts" tabu u[SD card/SIM card/common]. 2 Select an item.
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Data can be easily transferred when changing models or restored when you have lost the terminal since sent and received mails are saved on the docomo mail server. Also, your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers. For details of docomo mail, refer to NTT DOCOMO website. https://www.nttdocomo.co.
❖Information You can also send/receive text messages to/from customers of overseas network operators. Refer to NTT DOCOMO website for details on the countries and overseas network operators that provide this service. ･ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number". Enter the phone number without a leading "0", if any. Alternatively, enter "010", "Country code" then "the recipient mobile phone number" in order.
Deleting a message (SMS) 1 2 From the Home screen, u[Messaging]. Select a sender/recipient whose messages (SMS) to delete. 3 Touch and hold a message (SMS) to delete. 4 [Delete message]u[DELETE]. ❖Information To delete several messages (SMS), in Step 3, u [Delete messages]umark the messages (SMS)u u[DELETE]. ･ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[DELETE].
Email 4 You can add a POP3 or IMAP compatible email account provided by general provider, or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. ･ 5 Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u[Email]. ･ 2 3 To set a second or subsequent email account, from the Home screen, u[Email]u u[Settings]uTap [Add account].
Creating and sending email 1 2 3 From the Home screen, u[Email]. Tap (Write new message). Enter the email address of recipient. When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed. ･ To enter multiple email addresses in characters directly, separate with a comma (,) or a space input and then enter the next email address. ･ To add Cc or Bcc recipients, uMark "Show Cc"/"Show Bcc". ･ 4 5 Enter a subject and message. Tap (Send).
Saving attachment file of email 1 2 3 From the Home screen, u[Email]. Tap an email with attached files. ･ When attached file is not loaded, tap [LOAD]. Tap [SAVE] of fileuSelect a saving destinationu[SAVE]. Replying/Forwarding email 1 2 From the Home screen, u[Email]. Tap an email to reply or forwardu Tap any of [REPLY]/[REPLY ALL]/ [FORWARD]. ･ 3 4 Deleting email 1 2 3 From the Home screen, u[Email]. Tap an email to delete. Tap .
Changing Email account settings General Account settings name Your name Setting up an email account that supports IMAP 1 2 3 Incoming settings From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Configure Status bar notification, Notification sound, Vibrate*, and Notification light settings. Sync Check Set how often the Email settings frequency application checks for new emails. Days to sync Set a period of emails for sync.
･ You can change the settings for the "Email" application with the setting items displayed below the account in Step 3. Gmail You can use the email services provided by Google or by general providers. ･ Set up your Google account (P.187) or email account by following the onscreen instructions, if you have not already done so. ･ If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions.
Early Warning "Area Mail" Area Mail is a service which allows you to receive earthquake early warning or tsunami warning, emergency warning related to weather etc. delivered by the Meteorological Agency, and disaster/evacuation information delivered by the national government or local governments without being influenced by congestion. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
Viewing received Area Mail later 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. Select an Area Mail from the Area Mail list. ❖Information ･ Up to 50 messages can be saved. If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. Deleting Area Mail 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. Mark the Area Mail in the listu[Delete]u[OK].
❖Information Chrome ･ Use "Chrome" application to view web pages like on a PC. You can use "Chrome" application via packet communication and Wi-Fi network with the terminal. Displaying web pages 1 2 3 When address entry field is not displayed, flick down the screen to display. Enter a web page address or keyword to search. Tap for address entry field to enter search words in voice sound. ･ As you enter an address or characters, retrieved web pages list appears.
Changing tabs Changing Chrome settings 1 Tap 2 Tap the tab. ･ . Currently opened tabs are displayed with thumbnails in a list. ❖Information ･ A number in the icon explained in Step 1 varies by the number of tabs that are opened. Closing a tab 1 uTap close. ･ of tab you want to Alternatively, flick a tab left or right to close it. ❖Information ･ A number in the icon explained in Step 1 varies by the number of tabs that are opened.
Operating links Checking history From the Home screen, u u[History]. Tap a history to check. Touch and hold a link or an image in a web page to copy the URL or download the image. 1 ❖Information ❖Information In some website, downloading of files etc. may not be available. ･ Managing bookmarks and history 2 ･ ･ To delete history, tap of history. To delete all history, [CLEAR BROWSING DATA...
Apps dmarket d メニュー (dmenu) In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [d メニュー (dmenu)]. ･ Browser is activated, "ｄメニュー (dmenu)" appears. ❖Information To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required. ･ For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately. Some applications automatically perform packet communications.
Installing an application Play Store With Google Play, you can directly access useful applications or fun games and you can download and install them on the terminal. ･ To use Google Play, you need to set a Google account (P.187). ･ For details on purchasing applications, returning your purchases, or requesting a refund, see Google Play Help. ･ Once you accept the installation of an application, you will be held responsible for its use.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or " かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster. You can save electronic money and points to an IC card of the terminal and a docomo nano UIM card to check the balance or points on the screen.
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. ･ Bring the NFC / Osaifu-Keitai position close to the device slowly without hitting it strongly. ･ Hold the NFC / Osaifu-Keitai position over the center of the device and parallel to it. If scanning fails even with it held in front of the center of the scanner, slightly lift up the terminal, or move it backwards/forwards or to the left/right.
❖Information ･ ･ ･ ･ ･ ･ ･ You can scan and write data to or from an IC card reader without activating Osaifu-Keitai compatible application. These services are available even when the terminal is off. However, they may not be available if the terminal has been off for a long time or the battery is too low. The Osaifu-Keitai compatible application performs communication which is necessary for providing the Osaifu-Keitai service in the background regardless of the setting of "STAMINA mode" (P.
3 Enter a passwordu[NEXT]. When using "NFC / Osaifu-Keitai lock" for the first time, enter a password to set. ･ Osaifu-Keitai function is locked, and or is displayed in the status bar. ･ ❖Information Note that you cannot cancel "NFC / Osaifu-Keitai lock", if the battery runs out while "NFC / Osaifu-Keitai lock" is set. Be careful about remaining battery level. If you cancel "NFC / Osaifu-Keitai lock", charge the terminal before canceling.
Setting up the iD application or checking its information overseas will incur packet communication charges that are different from those in Japan. ･ For details on iD, refer to iD website. http://id-credit.com/ (In Japanese only) ･ ToruCa ToruCa application allows you to save coupons offered by your favorite shops and other useful information (ToruCa) to your terminal. You can obtain ToruCa in various ways, such as via email, Web download, Bluetooth, or IC tags. You can easily update your ToruCa.
TV TV is an application with which you can switch between Full seg and 1Seg and watch according to the air wave reception condition. In addition, since the data broadcasting can be received with images and sounds, interactive service using communication function of mobile devices and receiving detailed information are available. With Full seg, you can watch a terrestrial digital TV broadcasting service in high-vision quality.
Also, even in a terrestrial digital TV broadcasting service area, reception condition may be poor or reception may be unavailable in the following places: ･ A place far from the tower that the airwaves are sent from ･ Mountain-ringed regions or a place between buildings where airwaves are interrupted by geography or buildings ･ Tunnel, underground or far back from a building where airwaves are weak or do not reach Changing the direction of the TV antenna cable or moving to another location may improve signa
j k Watching TV 1 ■ From the Home screen, ･ u[TV]. When using for the first time, make channel settings according to the onscreen instructions (P.131). TV watching screen Record icon Channel selection key ･ Touch and hold / to search available channels. l Data broadcasting ･ For 1Seg programs, data broadcasting can be viewed only in the portrait screen.
Answering an incoming call while watching TV temporarily pauses the program. The program resumes automatically after the call ends. ･ To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication charge is applied. ･ Exiting TV 1 On the TV watching screen, b. ❖Information ･ You cannot exit TV even if you tap h to return to the Home screen.
Subtitle/Sound/Video Turn subtitles on or off, set setting their position, or select the main or sub audio channel.* 2 Settings Superimpose Set whether to display setting superimpose for Full seg or select a superimpose language. Data Set whether to use the Broadcasting location information or the settings terminal information, clear the broadcasting station memory, or postal code. Auto Exit Make a timer setting to end Timer TV watching. Device ID of Display device ID of receiver.
3 Tap the broadcasting station to change the remote control numberuTouch and hold the image. 4 Touch and hold the number of remote control to set to. 5 [YES]. ･ If you select a number of remote control which is already assigned to another broadcasting station, [Overwrite registered channel]uTap [YES]. Recording TV Record images, sound, captions or data broadcasting while displaying. ･ Data broadcasts can be recorded only in 1Seg mode.
Playing a recorded program 1 2 3 From the Home screen, u[TV]. u[Recorded program list]. Tap a program to play. ❖Information To delete a recorded program, touch and hold the program in Step 3u uTap [YES]. ･ To change the title of a program, touch and hold the program in Step 3u uEnter a titleuTap [OK]. ･ Tap in Step 3 to set the playback mode and see and sort the amount of available memory.
Activating the camera 1 Shooting screen From the Home screen, [Camera]. ･ a A shooting screen appears. ❖Information When the camera is turned on via Quick launch, the capturing mode is automatically set to "SUPERIOR AUTO" or "VIDEO". ･ The camera turns off if you do not touch the shooting screen for about 3 minutes (or about 30 seconds if you have turned on the camera in Quick launch mode).
❖Information ■ When using "AR effect" and other camera applications, the display and operations are different. ･ To zoom in or out, set "Use Volume key as" (P.142) to "Zoom" and operate with the volume key, or pinch in or out on the screen. ･ Zooming is not available when "AR effect" or "Panorama" is set or when shooting with the front camera. ･ The scene mode in "SUPERIOR AUTO" or "VIDEO" may not be recognized correctly depending on shooting conditions.
❖Information Themes downloaded via "AR effect" will be saved to the internal storage. ･ Some applications may not be able to play back sound from images taken using the "Sound Photo" feature. ･ To save the next shot data to the microSD card, using a microSD card (Speed Class 10 or UHS speed class 1) which supports high-speed writing is recommended. - 4K video - Super slow motion - Super slow (one-shot) - Slow motion ･ For details on the features of the camera, refer to the following website. http://www.
■ Shooting still pictures ■ 1 2 3 ■ Shooting with the shutter icon From the Home screen, [Camera]. Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen. Tap the shutter icon ( 3 Press k. ･ ). Shooting with "Touch capture" Set "Touch capture" (P.142) to "On". 1 2 From the Home screen, [Camera]. Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen. 3 Tap the shooting screen.
❖Information When the auto focus frame does not appear, focusing may be failed. ･ When a face of subject is detected, an auto focus frame is displayed at the position of the face (up to 5 frames). The frames around faces that the camera has automatically focused on—autofocus frames—are displayed in yellow. To select the face you want to focus on, tap the frame around that face. ･ When "Object tracking" (P.141) is turned on, tap the subject on the shooting screen to display the object tracking frame.
■ 1 2 3 Shooting with the camera key From the Home screen, [Camera]. Swipe (or flick) the screen to display "VIDEO" shooting screen. Press k. ･ Press k again to stop recording. ❖Information ･ ･ ･ ･ ･ Do not cover the microphone with fingers etc. when recording videos. When you connect a commercially available earphone or Bluetooth device, shooting start/stop sound may be softer than usual. When shooting video, you can tap the shutter icon ( ) to take a photo. When you set "Auto capturing (video)" (P.
■ Color and brightness (when "SUPERIOR AUTO" or "VIDEO" is set) Adjust brightness and color. To make adjustments, drag the marker on the bar that appears on the shooting screen. Tap on the shooting screen and then tap the setting item [Reset Color and brightness] to reset the settings. ■ ISO (only when "MANUAL" is set) Set ISO sensitivity. ･ With ISO sensitivity up, you can shoot clear picture reducing blur even in a place where lightning is poor. However, noise stands out.
■ Predictive Capture (only when "SUPERIOR AUTO" is set) When the camera detects movement of a subject, up to 4 photos are shot according to the movement. ■ Touch Measure photometry at a point where you tapped in the shooting screen and adjust the exposure. ■ Object tracking Set to shoot automatically without icon or key operation. Smile Shutter Shoot at the moment of a subject smiled. While video shooting, shoot a still image at the moment of a subject smiled.
■ SteadyShot™ (only when "4K video", "VIDEO" is set) Set whether to decrease blur by hand shake when shooting. Intelligent active (only when "VIDEO" is set) Reduce camera shake blurring when zooming, or when shooting while walking. Standard Reduce camera shake blurring when shooting normally. ■ ■ Set whether to shoot by tapping the shooting screen. If you set "Only front camera", Touch capture turns to On automatically when the camera is switched to the front camera.
■ Preview (when "Creative effect" or "Sound Photo" is set) ■ Set whether to display the preview screen or the edit screen after a still image is shot. ■ Set according to the ambient light source. uTap [WB] to set. / AUTO Incandescent Fluorescent Daylight Cloudy Recording file type (only when "4K video" is set) Select the file type from "H.264" or "H.265". ❖Information Some settings cannot be used in combination with one another. ･ The operation may differ depending on the capturing mode or camera app.
■ Slow motion shooting (only when "VIDEO" is set) Tap to switch to the capturing mode with slow motion. Shoot a moment when is tapped with Super slow motion. ･ To change the capturing mode, uTap [Slow motion mode] (P.140). ■ Self-timer (only when shooting with Front camera) Tap to set a number of seconds for selftimer. Each time you tap, it switches in the order of 3 sec. → 10 sec. → Off. The shutter icon changes into a timer icon. Tap it to shoot after set period of time (seconds) elapses.
❖Information Album ･ Displaying photos/videos 1 ■ From the Home screen, [Album]. ･ Depending on the number of saved images, it may take some times to load images. To zoom in/out an image, flick the image list screen right/left or pinch out/in. For some DRM protected contents or transfer applications, sharing may be limited. Touch and hold an image in the image list screen to select the image. When is displayed at the upper right of screen, an image or video can be played with Google Cast devices.
■ Photo viewing screen Playing a video a 1 From the Home screen, [Album] uTap a video. ･ 2 b c d e f ■ A preview screen appears. Tap ･ . Tap the screen to display information such as shooting date, option menu icons, etc. Video playback screen a Return to the image list ･ Alternatively, on the photo viewing screen, flick up/down to return to the image list screen. b Shot date ･ When a location information is saved, its relevant country or place name is displayed.
❖Information ■ To zoom in/out a video display, pinch out/in on the video playing screen. ･ The displayed menu may differ depending on the operation or selected video file. Also, some files cannot be operated. Music playback screen ･ a b g c d Media Player h Play back music and videos stored on the internal storage or a microSD card using Media Player. ･ File formats of playable data (P.
❖Information ･ g You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played. ■ Video playback screen ❖Information ･ a b Auto-rotate screen ON/OFF ･ Tap to turn red and disable Auto-rotate screen. h Volume control ･ Alternatively, on the playback screen, press the volume key to adjust the volume.
Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function The terminal has a GPS receiver that uses satellite signals to calculate your location. Some GPS features use the Internet. Data rates and charges may apply. When you use GPS function to find your location, make sure you have a clear view of the sky. If GPS does not find your location after several minutes, move to another location.
■ Where radio waves are difficult to receive Note that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.
Finding the current location on the map 3 You can detect your current location using location information service. ･ To detect current location, enable "Location" (P.150) beforehand. Searching for a location 1 From the Home screen, [Google] u[Maps]. ･ 2 When a message appears, follow the onscreen instructions. Tap . Current location is shown by blue mark. If you tap , the icon changes to , and then the terminal's geomagnetic compass links the direction displayed on the map.
Schedule ❖Information ･ Displaying schedule 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[Schedule]. 2 uTap [Monthly]/[Week]/[Daily]. ･ To move the cursor to the current date, in Step 2, tap u[Jump to]u[TODAY]. To move the cursor to the desired date, in Step 2, u[Jump to]uFlick the calendar left or right to select month and then tap a dayuTap [JUMP]. ･ To display all registered schedules in a list, in Step 2, u[Schedule list].
❖Information To search the contents entered in "title", "text" and "Where?", in Step 3, [Free word search]uEnter a search wordu[OK]u[OK]ub. ･ Stopping alarm 1 While alarm is sounding, drag to the right. ❖Information Clock Use alarm, world clock, stop watch and timer. If you tap [SNOOZE], the alarm sounds again when the set time has passed. ･ If the screen backlight is on (except on the lock screen), tap the notification at the top of the screen to operate.
Using Timer 1 2 3 4 5 From the Home screen, u[Clock]u" " tab. [SET TIME]. Drag the number up or down to set timeu[OK]. [START]. [STOP]. docomo Data Copy docomo Data Copy application allows you to copy the data saved to the terminal to the other terminal or back up/restore the data. Use this application for transferring the data when changing the model or for the regular backup of important data. Data transfer You can copy the phonebook entries, images, etc.
･ For the supported models or detailed use method, refer to NTT DOCOMO website. Backing up/Restoring to/from a microSD card You can transfer or back up the data such as phonebook entries or images using a microSD card. ･ Do not remove the microSD card of turn off the terminal during backup or restoring. The data may be damaged. ･ If phonebook item names (e.g. phone number, etc.) of the other terminal are different from ones of your terminal, the item names may be changed or deleted.
Restoring Copying phonebook entries registered in Google account to Restore the data such as phonebook entries or media files backed up to the microSD card docomo account to the terminal. 1 From the Home screen, u[Data Copy]u[Backup & Restore]. 2 3 [Restore]. Tap [Select] on data type to restore uMark data to restoreu[Select]. ･ 4 1 2 Tap [Select latest data] to select the latest data for each data type. For some data types, selecting the restoration method is not necessary.
Backing up/Restoring to/from Data Storage BOX You can transfer or back up the data such as call history or music using the Data Storage BOX (Cloud). u[Data 1 From the Home screen, Copy]. 2 3 u[Backup/Restore to Cloud]. [Backup] or [Restore]. After this step, follow the onscreen instructions. ･ When you do not log in to docomo cloud, on the confirmation screen, tap [Log in], then follow the onscreen instructions to log in.
Settings Viewing the setting menu 1 u From the Home screen, [Settings]. Wireless & networks Themes & wallpaper Device Accounts & services System P.158 P.168 P.168 P.186 P.190 Wi-Fi With Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet. ■ Wireless LAN (IEEE802.11b/g/n) devices and the Bluetooth devices use the same frequency band (2.4GHz).
❖Information ❖Information Even when Wi-Fi is on, packet communication is available. When a Wi-Fi network is disconnected, the connection is automatically switched to the LTE/3G/ GSM network mode. Note that packet communication charge may be applied if the network connection is kept switched. ･ Turn the Wi-Fi function to off when you do not use Wi-Fi to cut battery power consumption. ･ Make sure to receive signal strong enough for using Wi-Fi function.
Adding a Wi-Fi network manually ･ Setting up Wi-Fi Turn Wi-Fi on beforehand (P.158). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. [Add network]uEnter the name (SSID) of the Wi-Fi network. Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add. ･ Select from the 4 options: "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP" 4 If required, enter security information for the Wi-Fi network you want to add. 5 [SAVE]. 1 From the Home screen, u[Settings]u[Wi-Fi]uTap .
Using the Wi-Fi Direct function You can connect among the devices compatible with Wi-Fi Direct® via Wi-Fi even without configuring access point. ･ Turn Wi-Fi on beforehand (P.158). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. u[More features]u[Wi-Fi Direct]. Select a Wi-Fi Direct compatible device name to connect. Tap [SEARCH FOR DEVICES] to refresh the list of detected devices. ･ To change your terminal's name displayed on the detected Wi-Fi Direct compatible device, tap [RENAME DEVICE].
Enabling Data saver Setting Billing cycle Restrict the data communication in the background by the applications to reduce the data usage. Set the billing period (measuring period) of data communication, or the warning volume or the upper limit of data usage amount. 1 From the Home screen, u[Settings]u[Data usage]. 1 From the Home screen, u[Settings]u[Data usage]. 2 [Data saver]uTap 2 [Billing cycle]. .
Device connection Screen mirroring* Connect to a TV or tablet compatible with Screen mirroring to display the screen on the terminal. Cast Display the terminal's screen on a device that supports Google Cast. Media server P.203 Keep your device's Set whether to light the screen on terminal backlight while an external device is connected. DUALSHOCK™4 Set to allow a wireless controller (DUALSHOCK™4) to operate the terminal.
Using tethering function Use tethering function to enable the terminal to use as modem to allow USB compatible devices, wireless LAN devices or Bluetooth devices to access the Internet. ❖Information If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended.
❖Information If the portable hotspot starts while connecting to WiFi network, Wi-Fi connection is disconnected. Wi-Fi network is automatically connected when the portable hotspot ends. ･ The portable hotspot can be used with USB tethering or Bluetooth tethering at the same time. ･ To connect a wireless LAN device via NFC, tap [Onetouch portable hotspot] in Step 2.
Connecting to a VPN (Virtual Private Network) Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. ･ To set up a VPN on the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website. http://www.sonymobile.co.jp/support/ (In Japanese only) ❖Information To edit VPN, tap of VPN in Step 2uEnter or set each itemu[SAVE].
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For details of sp-mode, refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/service/ spmode/ (in Japanese only) For using mopera U and Business mopera Internet, add the access point manually. For details on mopera U, refer to mopera U website. https://www.mopera.
Resetting the network settings All network settings set to the terminal can be reset. 1 From the Home screen, u[Settings]u[More]u[Network settings reset]. 2 [RESET SETTINGS]u[RESET SETTINGS]. Themes & wallpaper Themes Wallpaper P.58 P.57, P.82 Device Display Notifications Sound Apps Storage & memory Battery Lock screen & security Users Call Location P.169 P.170 P.171 P.173 P.175 P.177 P.178 P.185 P.97, P.210 P.
Display Brightness level P.170 Adaptive Adjust the screen brightness brightness automatically according to the ambient brightness with reference to the brightness set in "Brightness level". Sleep Set a time for turning off of screen backlight. Smart backlight Set the screen backlight not to turn control off when you use the terminal holding with your hand even while touch operation is not performed.
Adjusting the screen brightness 1 2 From the Home screen, u[Settings]u[Display]u [Brightness level]. Drag the slider to the right or left. Adjusting the white balance 1 2 From the Home screen, u[Settings]u[Display]u[White balance]. Touch and hold the area displaying "Press and hold here to see previous setting" to check the setting before adjusting. [DONE]. ❖Information ･ Setting the notification of application 1 In Step 2, u[Default values]u[DONE] to reset back to the default status.
*1 Displayed when the screen lock unlocking method is set to "Pattern"/"PIN"/"Password". *2 Set from the quick setting tool of the quick settings panel (P.54). Before using, tap and set "Do not disturb" as an available quick setting tool. ❖Information The items that can be set vary depending on the settings of the terminal or application/function. ･ To reset the settings for the application, tap in Step 2u[Reset app references] (P.175).
Accessory Automatic Optimize sound quality by settings optimization analyzing characteristics of a connected headphone and acoustic sense. Noise Reduce background noise canceling by turning on the noisecanceling function. The setting can be made when the noise-canceling headphones are connected. LDAC Set to use LDAC playback compatible device for quality playback of high sound quality audio. The setting can be made when LDAC device is connected. Mic Set the microphone sensitivity sensitivity.
Adjusting sound volumes Adjust the volumes for playing media, alarm, ringtone and notification sounds. 1 2 From the Home screen, u[Settings]u[Sound]. Drag the slider of "Media volume"/ "Alarm volume"/"Ring volume" left or right. ❖Information The alarm volume set via the "Clock" application has precedence (P.153). ･ You can also press the volume key to adjust the ringtone volume. Pressing the volume key or O mutes ringtone for incoming calls.
Permissions Notifications Open by default Battery Memory Change access authorization setting. Change notification setting. Clear the setting of default application. Check the battery use condition after the previous full-charging. Check memory usage amount. ❖Information Tap in Step 2 to set Preferred apps settings, App permissions, App links, default application setting, etc. ･ The displayed items may differ or the item may not be selected depending on application or usage condition.
Disabling application You can disable services or applications that cannot be uninstalled. ･ Disabled applications are not displayed on the Home screen or application screen and you cannot execute them, but they are not uninstalled. 1 Tap u[Show system] to show all applications. Tap the application to disable. [DISABLE]uRead the notes and tap [DISABLE APP]. ❖Information ･ When you disabled an application, some other applications linked to the disabled application may not be operated correctly.
Viewing the storage use condition ❖Information Check memory volume of the internal storage, microSD card, USB storage, or format microSD card or USB storage. ･ 1 From the Home screen, u[Settings]u[Storage & memory]. 2 [Storage usage]. ･ Alternatively, [Storage]. u[Advanced]u Used memory and total memory of the internal storage is displayed. Internal shared Total memory and used storage*1 memory of the internal storage is displayed.
Battery Battery level and The battery level and remaining estimated standby time (estimate) are battery time displayed. Tap [SHOW BATTERY USAGE] to check remaining battery and applications/functions that use the battery from the last fullcharging. STAMINA mode Restrict the operations and a part of functions of the terminal to save the battery power. ･ Select "Auto start at XX% battery" to set to enable STAMINA mode when the battery level becomes to a specified level.
Lock screen & security Screen lock Fingerprint Manager Smart Lock Lock screen message Clocks Configure notifications Encrypt device Set up SIM card lock*1 Make passwords visible P.181 P.182 Set to enable unlocking by the On-body detection or registered trusted places/devices/face/ voice when Screen lock is set to "Pattern"/"PIN"/"Password". Enter a message to be displayed on the lock screen. Set a clock for the lock screen. P.171 The internal storage is encrypted by default. P.
Security codes for the terminal ･ Some functions provided for convenient use of the terminal require the security code to use them. Besides the security code for locking the terminal, the network security code necessary for the network services etc. are available. Make use of the terminal using an appropriate security code according to the purpose.
■ PIN code You can set up a security code called a PIN code for your docomo nano UIM card. The code is set to "0000" at the time of subscription; however, you can change the code by yourself. PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use of docomo nano UIM card by a third party every time you insert the docomo nano UIM card into the terminal or when the terminal is powered on.
Enabling SIM card lock Unlocking PIN lock By entering PIN code when powered on, you can protect from improper use. 1 2 3 1 2 From the Home screen, u[Settings]u[Lock screen & security]u[Set up SIM card lock] u[Lock SIM card]. Enter PIN codeu[OK]. Entering the PIN code when powered on 1 On the PIN code entry screen, enter the PIN code. 2 Tap ･ You can change only when you activate the SIM card lock.
of "Screen lock" as required. ■ To turn off the screen lock Make pattern Set whether to show pattern when the Home screen, 1 From visible* entering pattern. u[Settings]u[Lock screen & Automatically Set the time from when the screen security]u[Screen lock]uEnter the lock backlight turns off to when the current unlock pattern, PIN, or screen automatically locks. passwordu[None]u[YES, Power button Set whether to instantly lock the REMOVE].
･ Authentication performance—how successfully your fingerprint can be recognized when you touch the fingerprint sensor (O) properly— varies depending on the condition of your fingers. Fingerprint registration may fail or the authentication performance may decrease if your fingers have any of the conditions listed below.
■ 1 Registering your fingerprint From the Home screen, u[Settings]u[Lock screen & security]u[Fingerprint Manager]. ･ 2 If you have already registered fingerprint, the entry screen for unlocking the screen lock appears. Enter the unlocking method to display the fingerprint setting screen. ❖Information ･ On the Fingerprint Manager screen, you can perform the following actions: - To rename a fingerprint, tap a registered fingerprintuEnter a nameuTap [OK].
Emergency information Users Add users to share the terminal with multiple users (function that allows users and guests to use the terminal). To switch users or add a guest, operate from the Quick settings panel (P.54). You (Owner) Guest + Add user Add users Check or edit profile information. Set whether to allow a guest to use the phone by tapping while the owner uses the terminal. ･ When a "guest" is using the terminal, "Remove guest" is displayed.
Location 1 2 3 From the Home screen, u[Settings]u[Location]. Tap . Read the notes on location information and tap [AGREE]. ･ When a screen for asking whether to improve location information is displayed, follow the onscreen instructions to operate. Set a mode to identify location information. Recent location Display the application using the requests recent location information data. Location Set or check Google Location services History. ･ You may need to set a Google account.
Profile setting docomo service initial settings Switch USB debugging Open source licenses Check or change your profile information used for docomo services. P.43 Make the settings for using the dedicated terminal at a docomo Shop etc. View open source licenses. ❖Information ･ You can disable applications displayed in docomo service/cloud. Disabled applications may not be displayed in the list of docomo service.
Setting other account 1 2 From the Home screen, u[Settings]u[Account & sync]u [Add account]. Tap an account type. ･ Configuring sync settings for your accounts ■ Synchronize information of online service with the terminal. You can display and edit information on the terminal or a PC. ･ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. After this step, follow the onscreen instructions. ❖Information ･ docomo account is set by default.
Backup & reset Back up my data Backup account Automatic restore Factory data reset Set whether to back up settings for applications, data, etc. to Google server. Set an account for backup to Google server. Set to restore the backup settings or data when re-installing application. P.189 ❖Information ･ Some pre-installed content can be re-downloaded, even if it is deleted when you reset your terminal.
Xperia™ Tips System Assist Date & time Languages & input Accessibility About phone P.190 P.191 P.191 P.193 P.194 Xperia™ Actions STAMINA mode Assist Check the introduction of the function of the terminal, customize the terminal, set data protection, etc. Also, you can make settings for displaying the hints of the terminal, the operations performed automatically by the terminal and the battery or memory.
Date & time ･ To set date/time or time zone manually, turn off "Automatic date & time" or "Automatic time zone" in advance. Adjust date and time automatically by using network-provided information. Automatic time zone Adjust time zone automatically by using network-provided information. Set date Set date manually. Set time Set time manually. Select time zone Set time zone manually. Use 24-hour format Set whether to use 24-hours format.
Pointer speed Set pointer speed when a mouse or trackpad is used. *1 Displayed when the language is set to English. *2 Downloading a spell checker application is required. Changing the phone language 1 2 3 From the Home screen, u[Settings]u[Languages & input]u[Languages]. [Add a language]uSelect the languageuSelect the country or region as required. Drag of the language to the top layer ("1" position).
Accessibility Osusume hint Captions Mono audio Magnification gesture Font size Display size Large mouse pointer High contrast text*1 Color inversion*1 Color correction*1 Speak passwords Set whether to use Osusume hint function that introduces how to use the terminal according to your operations or usage conditions. ･ Use setting is required in advance (P.186). Set whether to display the captions or set the language, font size for captions. Set whether to play sound with monaural.
About phone Software Update Status Legal information Certificates Usage info settings Model Android™ version Android security patch level Baseband version Kernel version Build number P.226 Check own phone number, battery status, remaining battery, battery performance, etc. Check open source license or Google terms of use, etc. P.234 Set whether to send usage information for the terminal. Check versions, numbers, etc.
File management microSD card (External storage) Storage structure Phone (Internal storage) Folders in the internal storage (/storage/ emulated/0) by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM Download Movies Music Notifications Pictures Podcasts Ringtones Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera.
■ 1 2 3 4 ■ 1 Creating a folder From the Home screen, manager]. ■ u[File Tap the folder as required. u[New folder]. Enter a folder nameu[OK]. 1 2 3 4 Renaming folder or file From the Home screen, manager]. u[File 2 3 Tap the folder as required. Touch and hold a folder or file you want to rename. 4 u[Rename]uEnter a nameu [OK]. ■ 1 2 3 4 5 Deleting a folder or file From the Home screen, manager]. u[File Tap the folder as required. Touch and hold a folder or file you want to delete. u[OK].
･ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not communicate wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.230) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ･ Once paired, the setting with the Bluetooth device is saved. ･ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. ･ Make sure that the Bluetooth function and Bluetooth detection function of the target device are on in advance.
3 [OK]. ･ To reconnect, tap the Bluetooth device name. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with a target Bluetooth device. Sending data via Bluetooth function 1 2 [Bluetooth] from the sharing menu of each application. Tap the other Bluetooth device. Receiving data 1 Send data from the other Bluetooth device. ･ 2 appears on the status bar.
Even if NFC / Osaifu-Keitai position for holding over is placed face to face, sending/receiving may fail. In such case, operate again to send/ receive. ･ The terminal does not communicate with all NFC devices. ･ For notes when holding over the other device (P.123). ･ Enabling NFC Reader/Writer, P2P function 1 2 From the Home screen, u[Settings]u[More]. [NFC / Osaifu-Keitai settings]uTap of "Reader/Writer, P2P"u[OK].
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Place the NFC / Osaifu-Keitai positions for holding over face to face with a mobile phone for sending (P.123). ･ When you receive data, appears on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions. Selecting NFC Type 1 2 3 From the Home screen, u[Settings]u[More]. [NFC / Osaifu-Keitai settings]u [NFC Type].
External device connection Connecting to PC 1 Connect to a PC to exchange data between the internal storage or the microSD card and a PC. When a screen for installing driver software appears, wait for a while until the installation is complete. ･ When "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL]. ･ The "Use USB to" screen appears on the terminal. ･ ❖Information Appeared screen may vary depending on the operating system (OS) of a PC.
Removing USB cable A to C safely ･ Do not remove the USB cable A to C during while transferring data. Data may be damaged. 1 Confirm that it is not transferring data, remove the USB cable A to C. Setting Media server 1 2 From the Home screen, u[Settings]u[Device connection]u[Media server]. Tap of "Share media". ･ ･ Connecting DLNA device Using Wi-Fi function, you can share media files with other client (DLNA : Digital Living Network Alliance) devices.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. For details of International Roaming Service (WORLD WING), refer to NTT DOCOMO website. https://www.nttdocomo.co.
Before using overseas Advance preparation Network service settings Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For charging, refer to NTT DOCOMO website. Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website.
After arriving overseas When you arrive overseas and turn on the terminal, an available network is automatically set. Connectivity When you have set "Search mode" of "Service providers" (P.206) in Mobile networks to "Automatic", optimized network is automatically selected. Setting a network operator By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.
Setting the preferred network type 1 From the Settings screen, u[Settings]u[More]u[Mobile networks]u[Preferred network type]. 2 Tap any of [4G (preferred)/3G/ GSM]/[4G/3G]/[3G/GSM]/[GSM only]. ･ Select "4G (preferred)/3G/GSM" to switch available network automatically. Using VoLTE during international roaming Set to enable VoLTE when VoLTE is available during international roaming. 1 From the Home screen, u[Settings]u[More]u[Mobile networks]. 2 Tap of "Enable VoLTE".
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ･ Check that the battery and signal levels are high enough. ･ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log. 2 If the area code (city code) begins with "0", omit "0".
Making a call within the country you stay Receiving a call in the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 From the Home screen, tab. u"Dial" 2 Enter a phone number. 3 Tap 4 When the call is finished, tap ･ ･ You can receive a call using the international roaming service. 1 On the incoming call screen, drag (left) to (right). 2 When the call is finished, tap .
■ Having someone make a call from other than Japan to the country you stay You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access number and "81" (Country code of Japan). International access number - 81 - 90 (or 80, 70) - XXXX - XXXX International roaming settings Make settings for using international roaming services. ･ For some overseas network operators, settings may not be made. 1 From the Home screen, .
Setting International dialing assist 1 2 3 From the Home screen, uTap . [Call settings]u[Roaming settings]. [International dial assist]. Auto Add international prefix or country conversion code automatically. Country code Select a country code used for auto conversion. International Select an international prefix used for prefix auto conversion. Setting Network service (overseas) Set network service such as voice mail from overseas. ･ You need to set "Remote operation settings" (P.
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ･ Set "Preferred network type" (P.207) to "4G (preferred)/3G/GSM". ･ Set "Search mode" to "Automatic" in "Service providers" (P.206).
* Note that some data and settings may be erased due to force-quit operation. Appendix/Index Troubleshooting ■ Troubleshooting When you have a vague idea of malfunctioning, you can perform diagnosis by yourself. For details, refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/support/ trouble/repair/ (in Japanese only) ･ Check if the software update is necessary for the terminal. If necessary, perform the software update (P.226, P.229).
Battery Care charging does not start ･ Battery Care charging cannot start when learning is not complete because regularity in your charging habit has not been found. → P.37 Cannot charge fully ･ If you remove charging equipment during Battery Care charging, the terminal may not be fully charged. To charge fully, from the Home screen, u[Settings]u[Battery]u[Battery Care] uTap to turn off Battery Care and then switch to normal charge. → P.37 ■ Terminal operation Become hot while operating/charging.
When the Wi-Fi function or Bluetooth function is not used, turn off the setting. → P.158 , P.197 ･ When STAMINA mode is set, the operations and a part of functions of the terminal are restricted so that the consumption of the battery power can be reduced. → P.177 Operations are not possible when tapping or pressing keys. ･ Check if the power is turned off. → P.42 ･ Check if you activate the screen lock. → P.
* Safe mode is not a normal active state. To use ordinarily, exit from the safe mode. Applications cannot be operated properly (applications cannot be activated, or errors occur frequently). ･ Are there any applications being disabled? Enable disabled applications, then retry. → P.175 ･ Are the permissions for the application granted? → P.49 , P.174 ■ Phone call Cannot make a call even if you tap . ･ Check if you activate Airplane mode. → P.163 The ringtone does not sound.
■ Display The display is dim. ･ Check if "Sleep" is set in short time period. → P.169 ･ Check if the brightness of screen is changed. → P.170 ･ When "Adaptive brightness" is ON, screen brightness is changed according to the ambient brightness. → P.169 ･ Check if you cover the Proximity/Light sensor with a sticker etc. → P.30 ･ When the temperature of the terminal becomes high while using, the display may become darker. It is not abnormal.
■ Osaifu-Keitai Osaifu-Keitai function is unavailable. ･ When Omakase Lock is set, Osaifu-Keitai functions are unavailable regardless of the NFC / Osaifu-Keitai lock settings. ･ Check if NFC / Osaifu-Keitai lock setting is set. → P.124 ･ Check if you hold NFC / Osaifu-Keitai position over an IC card reader?→ P.123 ■ International roaming Cannot use the terminal overseas (when is displayed) ･ Do you subscribe WORLD WING? Check if you subscribe WORLD WING.
■ Data management Data transfer is not performed. ･ Check if USB hub is used. If you use USB hub, operations may not be performed correctly. Data saved in microSD card is not displayed. ･ Remove and reinsert the microSD card. → P.34 " " or "u" appears when displaying images, or " " or "u" appears for the demo play or the preview function. ･" "/"u" may appear instead of destroyed image data.
Error messages ● No service ･ The terminal is out of service area, or the received signal is too weak. Move to a location where radio signal can be reached. ･ The docomo nano UIM card is not working properly. Removing and inserting docomo nano UIM card may solve the problem. If the problem persists, try inserting the docomo nano UIM card into another terminal. If this works, it is probably the terminal that is causing the problem.
● Memory is getting low Available memory space in the terminal is low. If you continue to use the terminal, some functions or applications may not work. Activate the setting menu and select unnecessary applications, then tap [UNINSTALL] to uninstall the applications (P.174). ● Memory full. There is no memory space in the microSD card. Delete unnecessary data (P.196) to save the memory space.
･ 2 3 4 5 To make a call to the Anshin Enkaku Support center from the terminal, from the Home screen, u [ 遠隔サポート (Enkaku support)]u[ この スマートフォンから発信する (Make a call from this smartphone)]uTap . From the Home screen, u [ 遠隔サポート (Enkaku support)]. [ 遠隔サポートの接続画面に進む (Go to Enkaku support connection screen)]u[ 同意する (Agree)]. Enter the connection number notified by DOCOMOu[ 開始 (Start)]. Enkaku support starts when you are connected.
When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty, that involve malfunction and damage due to incorrect handling by the owner (damage of external connection jack, display, etc.), or for the terminal once repaired in a repair office other than one specified by DOCOMO will only be repaired at the owner's expense, even if the warranty period is still effective.
The terminal has been repaired by a repair office other than the DOCOMO specified one. * Even if repair is possible, it will be done at the owner's expense, as this type of corrosion or damage is not covered by the warranty. ･ ■ If the warranty period expires We will repair the terminal at the owner's expense. ■ Parts stock period The functional parts necessary to repair the terminal will be basically available for a minimum of 4 years after the manufacture is discontinued.
● Note that the settings and other information may be reset (cleared) as a result of malfunction, repair or other handling. In this case, make the settings again. In that case, packet communication charge may incur depending on the settings. ● After the repair, Wi-Fi MAC address or Bluetooth address may be changed regardless of the repaired parts. ● Take care not to let an object that is easily affected by magnetism, such as a cash card near the terminal because the card may become unavailable.
Software Update Software Update Software update is a function to connect to the network to check if software update is required, then download the update file and install it as required. When update is needed, you can check (Software Update) in the status bar or information on the NTT DOCOMO website. Software update includes the following, etc. To use the terminal in safety and more comfortably, be sure to update to the latest version.
If the update failed and all operations become disabled, please contact a DOCOMOspecified repair office. ･ Messages (SMS) sent while updating are stored in the SMS center. ･ Performing update may take time. ･ Updating is unavailable in the following cases.
■ When the confirmation screen for update appears Depending on update, a confirmation screen for performing update appears after [Update now] is tapped. 1 Select a updating method. "Perform now (only via Wi-Fi)" : Immediately download the update file via Wi-Fi connection. ･ "Perform at scheduled time (via Wi-Fi/ Xi)"* : Download the update file via Wi-Fi connection or Xi/FOMA at the time that is reserved automatically.
❖Information ･ For OS version support information on each application, contact the application provider. Connecting to a PC to update Install a software for "Software update" beforehand. For methods of software installation, refer to the following website. http://www.sonymobile.co.
Continuous Full seg watching time Continuous 1Seg watching time Display Type/ Colors Approx. 470 min. Approx. 550 min. TFT (Triluminos® Display for Mobile) 16,777,216 colors Size Approx. 5.2 inches Resolution 1,080 (H)u1,920 (V) pixels (Full HD) Image Type Camera : Backsidepickup illumination layered CMOS device Front camera : Backsideillumination layered CMOS Size Camera : 1/2.3 inches Front camera : 1/3.0 inches Camera effective pixels Camera : Approx. 19,200,000 pixels Front camera : Approx.
Headset jack Size Pole*7 Diameter 3.5 mm 5-pole *1 It is not the actual storage capacity because the memory is also used for the Android OS and preinstalled applications. For available memory, see "Viewing the storage use condition" (P.176). *2 It is a charging time when the microUSB conversion adapter B to C 01 (optional) is used for charging. *3 It supports MIMO.
■ File format (media) ■ The terminal supports the display or playback of the following file formats: Recordable time to save to a Approx. 320 min. microSD card (1GB) Type Sound Still image* Video File format AAC-LC (.mp4, .m4v, .3gp, .3gpp, .ts, .avi, .aac, .m4a), AAC+ (.mp4, .3gp, .3gpp, .ts, .avi, .aac), eAAC+ (.mp4, .3gp, .3gpp, .ts, .avi, .aac), AAC-ELD (.mp4, .3gp, .3gpp), AMR-NB (.3gp, .3gpp, .amr), AMR-WB (.3gp, .3gpp, .awb), FLAC (.flac), MP3 (.mp3), MIDI (.mid, .xmf, .mxmf, .rtttl, .rtx, .
Frisian/A lingua galega/Georgian/German/ Greek/Gujarati/Hausa/Hebrew/Hindi/ Indian English/Hungarian/Icelandic/Igbo/ Indonesian/Irish/Italian/Japanese/ Javanese/Kannada/Kashmiri/Kazakh language/Khmer/Konkani/Korean/Kurdish/ Kyrgyz language/Lao language/Latvian/ Lithuanian/Luxembourgish language/ Macedonian language/Maithili language/ Malagasy/Malaysian/Malayalam/Maltese/ Meithei language/Marathi/Mongolian/ Nepali/Norwegian/Langue d'oc/Oriya/ Polish/Portuguese/Punjabi/Romanian/ Russian/Sanskrit/Santali langu
Certificate and compliance You can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number). 1 2 ■ From the Home screen, u [Settings]. [About phone]u[Certificates]. VCCI The terminal complies with a technical standards based on VCCI RULES FOR VOLUNTARY CONTROL MEASURES and the mark of conformity is depicted electronically on the screen.
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This license is governed by the laws of Japan. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
･ Wi-Fi, Wi-Fi Protected Setup, Wi-Fi Protected Setup logo, WPA2™, Wi-Fi Direct and Wi-Fi CERTIFIED Miracast are registered trademarks of Wi-Fi Alliance. ･ microSD logo, microSDHC logo and microSDXC logo are trademarks of SD-3C, LLC. USB Type-C™ is a trademark of USB Implementers Forum. ･ is a registered trademark of FeliCa Networks, Inc. ･ FeliCa is a contactless IC card technology developed by Sony Corporation. ･ is a trademark or registered trademark of NFC Forum, Inc. in the US and other countries.
"Microsoft", "Windows", "Microsoft Excel", "Microsoft PowerPoint", "PlayReady" and "Microsoft Exchange ActiveSync" are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. ･ "Microsoft Word" is a product name of Microsoft Corporation in the United States. ･ This product contains technology subject to certain intellectual property rights of Microsoft.
SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ･ Available services and functions may be limited. DOCOMO is not liable to any failures or malfunctions. ･ For details of SIM unlock procedure, refer to NTT DOCOMO website. 1 2 3 Insert SIM card provided by other company. Power on the terminal. Enter the SIM unlock codeu [UNLOCK].
Index A About phone ････････････････････････ 194 Access point Initializing ･････････････････････････ 167 Setting････････････････････････････ 167 Accessibility ･････････････････････････ 193 Account & sync ･･･････････････････････ 187 Removing ･････････････････････････ 188 Accounts & services ･･･････････････････ 186 Adjusting sound volume ･･･････････････ 173 Airplane mode ･･･････････････････････ 163 Alarm ･･･････････････････････････････ 153 Alarm ringtone ･･･････････････････････ 173 Alarm volume ･･････････････
Pair setting ････････････････････････ Receiving ･････････････････････････ Sending ･･･････････････････････････ Bookmarks ･･････････････････････････ Brightness level ･･････････････････････ 198 199 199 119 170 C Calculator ････････････････････････････ 64 Calendar ･････････････････････････････ 63 Call･･････････････････････････････････ 88 Answering with Answering Machine ････ 91 Calling screen ･･･････････････････････ 93 Declining a call ･･････････････････････ 92 Ending ･････････････････････････････ 93 Making a
Date & time ･･････････････････････････ 191 Device ･･････････････････････････････ 168 Device connection ････････････････････ 163 Dial ･････････････････････････････････ 63 Disaster kit ･･･････････････････････････ 63 Display･･････････････････････････････ 169 dmarket･････････････････････････････ 120 dmenu ･･････････････････････････････ 120 docomo Data Copy････････････････････ 154 docomo mail ･････････････････････････ 107 docomo nano UIM card ･････････････････ 31 Precautions ･････････････････････････ 20 docomo s
Handwriting ･･････････････････････････ Home application docomo ････････････････････････････ Switching ･･････････････････････････ Xperia ･････････････････････････････ Home screen ･･････････････････････････ Adding (docomo LIVE UX) ･････････････ Adding (Xperia Home) ････････････････ Backup ････････････････････････････ Deleting (docomo LIVE UX) ････････････ Deleting (Xperia Home) ･･･････････････ docomo LIVE UX ･････････････････････ Folder (docomo LIVE UX) ･･････････････ Folder (Xperia Home) ･････････････････ Ki
microSD card ･････････････････････････ 33 Formatting ････････････････････････ 176 Unmounting ･･･････････････････････ 176 Missed call････････････････････････････ 96 Moji-Henshu ･････････････････････････ 191 Movie Creator ･････････････････････････ 67 Multi-tap input ････････････････････････ 77 Music ････････････････････････････････ 65 My Magazine ･････････････････････････ 86 My profile Display ･･･････････････････････････ 102 Editing ････････････････････････････ 106 My Words ････････････････････････････ 78 N
Play Movies & TV･･･････････････････････ 67 Play Music ････････････････････････････ 67 Play Store ･･･････････････････････････ 121 Installing ･･････････････････････････ 121 Uninstalling････････････････････････ 121 Playing video ････････････････････････ 146 PlayStation ･･･････････････････････････ 67 Portrait view ･･････････････････････････ 46 Preferred network type ････････････････ 207 Proximity/light sensor ･･････････････････ 30 Public mode (power OFF) setting ･････････ 98 Q Quick settings panel ････････････
System･･････････････････････････････ 190 U T USB connection ･･････････････････････ 202 USB Storage ･････････････････････････ 176 Users ･･･････････････････････････････ 185 Take screenshot ･･･････････････････････ 47 Task manager ･････････････････････････ 70 Tethering ････････････････････････････ 164 Bluetooth tethering ･････････････････ 165 Portable hotspot････････････････････ 164 USB tethering ･･････････････････････ 164 Text editing ･･･････････････････････････ 77 Theme ･･･････････････････････････････ 58
WORLD CALL ･････････････････････････ 90 World clock ･･････････････････････････ 153 WORLD WING ････････････････････････ 204 X Xperia Japanese keyboard ･･････････････ 191 Online help ･････････････････････････ 73 Xperia Lounge Japan ･･･････････････････ 67 Y YouTube ･････････････････････････････ 67 Numerics 1Seg ･･･････････････････････････････ 127 Appendix/Index 247
Make various applications, check your subscription, and more online The terminal: d メニュー (dmenu) u [My docomo（お客様サポート）(My docomo (Customer support))] u [ドコモオンライン手続き (docomo online procedures)] PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) u Select the item in " ドコモオンライン手続き (docomo online procedures)" (in Japanese only) * There are cases where the site may not be available due to system maintenance, etc.
General Inquiries 0120-005-250 (toll free) Repairs (Inquiries/Request) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc.
