User's Manual

Z320
User guide
2
Congratulations on your purchase of the
Sony Ericsson Z320. For additional phone content,
go to www.sonyericsson.com/fun. Register now
to get free online storage and special offers at
www.sonyericsson.com/myphone. For product
support, go to www.sonyericsson.com/support.
Instruction symbols
The following instruction symbols appear in this
User guide:
> Use the navigation key to scroll and select.
Press the navigation key up.
Press the navigation key down.
Press the navigation key to the left.
Press the navigation key to the right.
Tip
Note
Warning
Indicates that a service or function is network-
or subscription-dependent. All menus or functions
may not be available in your phone. Consult
your network operator for more information.
3
Prepare the phone
Always turn off your phone and detach the charger
before you insert or remove the SIM card.
To insert the SIM card and battery
1 Remove the battery cover by sliding the battery release
latch down.
2 Slide the SIM card into its holder with the contacts
facing down.
3 Insert the battery with the label side up and the
connectors facing each other.
4 Slide the battery cover into place and close the battery
release latch
.
4
Charge the battery
Your phone battery is partly charged when you buy it.
It takes approximately 3 hours to fully charge the battery.
To charge the battery
1 Connect the charger to the phone. Press a key to view
the charging status on the screen.
2 To remove the charger, tilt the plug upwards.
It may take 30 minutes for the battery icon to appear
on the screen.
You can use the phone during charging. You can
charge the battery for more or less than 3 hours.
Interrupted charging will not damage the battery.
5
Turn the phone on
To turn on the phone
1 Press and hold down .
2 Enter your PIN if
requested. To correct
mistakes, press
.
3 Select OK.
4 Select a language.
5 At first start-up, select Yes to use the setup wizard
to make a phone setup. Select No to use the setup
wizard later.
To turn off the phone
• Press and hold down .
To use the setup wizard
• From standby select Menu > Settings > General
> Setup wizard > Basic setup.
After you have turned the phone on and entered
your PIN, the name of your operator appears on
the screen. This view or screen is called standby.
You can now make and receive calls.
6
SIM card
The SIM (Subscriber Identity Module) card,
which you get from your network operator,
contains information about your subscription.
Always turn off your phone and detach the
charger before you insert or remove the SIM card.
PIN code (SIM card lock)
The PIN (Personal Identification Number) code is a SIM
card lock that protects your subscription, but not the
phone itself. If the card is locked, you have to enter the
PIN code when you turn on your phone. Each PIN digit
appears as *, unless it starts with emergency number
digits, for example, 112 or 911. You can call an emergency
number without entering a PIN.
You can save contacts on the SIM card before
removing if from your phone. Contacts may also
be saved in the phone memory. See Contacts on
page 17.
If you enter the wrong PIN three times in a row,
the following message appears: PIN blocked. To
unblock, enter your PUK code provided by your
network operator. To unblock your SIM card, see
Locks on page 34.
7
Menu overview
Calls Internet Games
Camera Messaging File manager
Write new
Inbox
Drafts
Outbox
Sent messages
Saved messages
Call voicemail
Templates
Settings
Camera album
Pictures
Ringtones
Themes
Bookmarks
Games
Applications
Other
Organizer Contacts Settings
Online services
Alarms
Applications
Calendar
Tasks
Notes
Calculator
Timer
Stopwatch
Options
New contact
General
Sounds & alerts
Display
Calls
Connectivity
Some menus and icons described in this document may vary
depending on operator, network or subscription. Some options
may vary when the default settings are changed.
8
Phone overview
Camera key
Back key
Internet key Navigation key
Volume
buttons
C key (Clear)
On/off key
Infrared port
Microphone
Right
selection key
Left selection
key
Charging
(USB
connector)
Network
coverage
Battery status
Function for
right selection
key
Function for
left selection
key
Calls Menu
9
Network coverage
The network bars show the strength of the GSM network.
Move to another location if you have network problems.
No netw. coverage means you are out of range.
Battery status
The outside
= Good network coverage
= Average network coverage
= The phone battery is fully charged
= The phone battery is empty
Icon display
Camera lens
10
Icons
These icons may appear in your phone.
Icon Description
Battery charging, appears with battery icon.
You have missed a call. See Calling on page 15.
The phone is set to silent.
You have received a new text message.
You have received a new picture message.
Ongoing call.
Divert calls is activated.
An alarm is activated.
The loudspeaker is on.
The infrared port is activated.
The stopwatch is activated.
11
Shortcuts
From standby you can use the navigation keys to go
directly to a function:
• Press to start the camera.
• Press to write a message.
• Press to go to your contacts.
To navigate the menus
• From standby select Menu
and press , , or .
• Press to go back one step
in the menu.
• Press and hold down to return
to standby.
• Press or to move between tabs.
To delete items
• Press .
To set the phone to silent
• Press and hold down to set silent mode on or off.
To view tips and tricks
• From standby select Menu > Settings > General
> Setup wizard > Tips and tricks.
To change a standby shortcut, go to Menu
>
Settings > General > Shortcuts. The camera
shortcut cannot be changed.
12
Messaging
Your phone supports various messaging services.
Text messages
You need a service centre number from your
network operator to be able to send text messages.
To view and set the service centre number
1 From standby select Menu > Messaging > Settings
> Text message > Service centre.
2 If there is no number, select New ServiceCentre,
enter the number including the international “+”
prefix and country code. Select Save.
To write and send a text message
1 From standby select Menu > Messaging > Write new
> Text message.
2 Write the message and select Continue.
3 Select Enter phone no., enter the number and
select OK.
4 Select Send.
See Entering text on page 30 for instructions on how
to enter text and numbers.
13
Picture messages
Picture messages can contain enhanced
functionality with text, sound and pictures.
To create and send a picture message
1 From standby select Menu > Messaging > Write new
> Picture msg.
2 Select More and select an item to follow your message.
3 Write the message and select OK > Continue.
4 Select Enter phone no., enter the number and
select OK.
5 Select Send.
To save an item in a picture message
1 In the message, select More > Save items.
2 Select an item and where to save it.
To delete all sent messages
1 From standby select Menu > Messaging > Sent
messages.
2 Select More > Delete all msgs > Yes.
You need the correct Internet (MMS) settings in your
phone. Go to www.sonyericsson.com/support and
request a text message with the settings or contact
your network operator.
14
Automatic download
Select how to download your picture messages.
To select a download option
1 From standby select Menu > Messaging > Settings
> Picture message > Auto download.
2 Select an option:
• Always – automatic download.
• Ask in roaming – ask to download when not in home
network.
• Not in roaming – do not download when not in home
network.
• Always ask – ask to download.
• Off – new messages appear in the inbox as icons.
Select the message and select View to download.
Receiving messages
To view and save a message from the inbox
1 From standby select Menu > Messaging > Inbox.
2 Scroll to a message and select View. If you want
to save the message, select More > Save
message > Saved messages (SIM card) or
> Templates (phone).
To delete messages from the inbox
1 From standby select Menu > Messaging > Inbox.
2 Select More > Delete all msgs > All > Yes to delete
all messages. To delete one message, scroll to
the message and select More > Delete > Yes.
15
Calling
Your phone must be on and within range of a network.
To make a call
1 From standby enter the area code and phone number.
2 Select Call.
To make an emergency call
• From standby enter 112 (the international emergency
number) and select Call.
To make an international call
1 From standby press until a + sign appears.
2 Enter the country code, area code (without the
first zero), phone number and select Call.
To end a call
• Close the phone or select End call.
To answer a call
• When the phone rings, select Answer.
To reject a call
• When the phone rings, select Busy.
To view missed calls
• When Missed calls: is displayed, select Yes.
To call back, scroll to a number and select Call.
You can make emergency calls without a SIM card
and without entering a PIN.
16
To turn the loudspeaker on during a call
• Select More > Turn on speaker.
To change the ear speaker volume during a call
• Press or .
To turn off the microphone during a call
• Press and hold down . To resume, press and hold
down again.
Call list
You can view information about recent calls.
To call a number from the call list
1 From standby select Calls and scroll to a tab.
2 Scroll to the name or number and select Call
.
To add a number to contacts
1 From standby select Calls and scroll to a tab.
2 Scroll to the number and select More > Save number.
3 Select a contact or select New contact.
4 Enter the contact information and select Save.
To delete a number from the call list
1 From standby select Calls and scroll to a tab.
2 Scroll to the number and select More > Delete entry
> Yes.
Do not hold the phone to your ear when using
the loudspeaker. This could damage your hearing.
17
Contacts
In Contacts you can save contact information with name,
numbers, addresses, picture, ringtone, title, personal
information and birthday.
To add a contact
1 From standby select Menu > Contacts.
2 Scroll to and select New contact > Add.
3 Enter the name and select OK.
4 Scroll to New number: and select Add.
5 Enter the number and select OK.
6 Scroll to and select the contact type.
7 Select Save.
To call a contact
1 From standby select Menu > Contacts.
2 Scroll to, or enter the first few letters of the contact
and select Call.
To delete a contact
1 From standby select Menu > Contacts.
2 Scroll to the contact and press .
See Entering text on page 30 for instructions on how
to enter text and numbers.
Enter the + sign and country code with all phone
numbers. They can then be used abroad or at home.
18
To edit a contact
1 From standby select Menu > Contacts.
2 Scroll to the contact and select More > Edit contact.
3 Scroll to the contact information and select Edit.
4 Enter information or select a picture or ringtone.
5 Confirm and select Save.
To send all contacts
• From standby select Menu > Contacts > Options
> Advanced > Send all contacts and select a transfer
method.
To copy contacts between the phone and the SIM card
1 From standby select Menu > Contacts > Options
> Advanced.
2 Select Copy to SIM or Copy from SIM.
3 Select Copy a number or Copy all.
4 To copy one contact, select the contact.
To check memory status for your contacts
• From standby select Menu > Contacts > Options
> Advanced > Memory status.
When copying all contacts to the SIM card,
all existing SIM card information is replaced.
19
Speed dialling
Speed dialling lets you select nine contacts that you can
dial quickly by pressing numbers 1-9.
To add contacts to speed dial numbers
1 From standby select Menu > Contacts > Options
> Speed dial.
2 Scroll to a position number and select Add.
3 Select a contact.
To speed dial
• From standby enter the number (1-9) and select Call.
My number
You can view and edit your own phone number.
To view your own phone number
• From standby select Menu > Contacts > Options
> Special numbers > My numbers.
20
Camera
Your phone has a digital camera to take pictures to
save or send. Use infrared or picture messages to send
a picture to another phone or to a computer. Camera
pictures are saved in JPEG format in the Camera album.
To take pictures
1 From standby press to start the camera.
2 Select Capture to take the picture.
3 Press to save and take another picture or select
More > Delete to delete the picture.
To use the zoom
• Use or to zoom.
To adjust the brightness
• Use or to adjust the brightness.
To use the camera options
1 When the camera is activated select More.
2 Select an option:
• Picture size – select between three sizes.
• Night mode – enhance picture quality in poor lighting.
• Self-timer – the picture is taken a few seconds after
you press Capture.
• Effects – select different effects for your picture.
• White balance – adjust colours to lighting conditions.
• Picture quality – select picture quality.
• Shutter sound – select different shutter sounds.
21
To view your pictures
1 From standby select Menu > File manager > Camera
album.
2 Scroll to a picture and select View.
To send a picture
1 From standby select Menu > File manager > Camera
album.
2 Scroll to a picture and select More > Send. Select
atransfer method.
To use a picture
1 From standby select Menu > File manager > Camera
album and scroll to a picture.
2 Select More > Use as and select how to use the
picture.
You can use a USB cable to exchange pictures
between your phone and a computer. For more
information go to www.sonyericsson.com/support.
See also File manager on page 26 and Infrared on
page 31.
PPreflighted byreflighted byPreflighted by
( )( )( )