User's Guide Part 2
24 Calling
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice answer > Activate.
2 Follow the instructions that appear
and select Cont. Wait for the tone
and say “Answer”, or another word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear
and select Cont.. Wait for the tone
and say “Busy”, or another word.
5 Select Yes to accept or No for a new
recording.
6 Follow the instructions that appear
and select Cont.
7 Select where your voice answering
is to be activated.
To answer a call using voice
commands
• Say “Answer”.
To reject a call using voice
commands
• Say “Busy”.
Diverting calls
You can divert calls, for example,
to an answering service.
Divert call options
Standard options are:
• Divert always – divert all your calls
• When busy – if a call is ongoing
• Not reachable – if your phone is
turned off or unreachable
• No reply – if a call is not answered
in a specified time
To divert calls
1 From standby select Menu > Settings
> the Calls tab > Divert calls.
2 Select a call type and a divert option.
3 Select Activate.
4 Enter the number to divert calls to and
select OK.
More than one call
You can handle more than one call at
a time. For example, you can put an
ongoing call on hold, while you make
or answer a second call. You can also
switch between the two calls. You
cannot answer a third call without
ending one of the first two calls.
When Restrict calls is used, some
divert call options are not available.
See Restricted dialling on page 26.
Sofia_UG_P1C_EN.book Page 24 Wednesday, July 18, 2007 5:45 PM
0REFLIGHTEDBY
0REFLIGHTEDBY