Easy Search/Contents/ Precautions Before Using the Handset Voice/ Videophone Calls PushTalk Manual for Phonebook ’08.
NTT DoCoMo W-CDMA/GSM/GPRS System Mobile Phone Thank you for your purchase of the new “FOMA SO905iCS” mobile phone. For proper use of the FOMA SO905iCS, read this manual and each manual attached to other optional devices carefully before and while you use the FOMA SO905iCS. For more information on manuals, contact the inquiries on the backcover of this manual. The FOMA SO905iCS is the efficient partner of yours. Please handle the FOMA SO905iCS with care and use it regularly for a long time.
Information on Using the Manual and How to Look up in the Manual This manual guides you through the operating instructions with step-by-step screen examples for each operating procedure to ensure that you operate the FOMA terminal properly. ■ How to Look up in the Manual This manual employs several search methods so that it can provide the most appropriate way to find a page relating to your desired function or service flexibly according to your need or situation. For details, see the next page.
A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.474) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display. Ｎｏｔｉｆｙ Ｃａｌｌｅｒ ＩＤ Ｓｅｔ Ｎｏｔｉｆｉｃａｔｉｏｎ Ｃｈｅｃｋ ｓｔａｔｕｓ der info .................... 318 ve program .............. 337 N y ...................... 336, 338 program ................. 335 ............................... 317 a ............................... 45 Name .........................
■ Typical layout of the operating instructions page Function name Notifying the Recipient of Your Phone Number Index Before Using the Handset Chapter title Section title An outline and objectives of the function When placing a call, your phone number can be shown in the display of the recipient’s phone you are calling. The caller ID is important personal information. Carefully decide whether you want to notify a recipient of your caller ID.
Easy Search/Contents/Precautions Easy Search You can search the function that you want to know with simple words. Useful Functions for a Call Sending your phone number or keeping it anonymous ...Notify caller ID (P.45) Switching to videophone during a voice call ...............Chg. to videophone (P.54) Putting a current call on hold ............................................Holding (P.68) Adjusting the volume of a caller’s voice ......................Volume (P.
Sending Deco-mail ...........................................................Compose and send Deco-mail (P.204) Sending an image ..............................................................File attachment (P.208) Sorting received mail automatically .............................Sort inbox/Sort outbox (P.222) Useful Functions for the Camera Easy Search/Contents/Precautions Useful Functions for Mail Changing the recording size ...........................................Select size (P.
Easy Search/Contents/Precautions Contents Before using the FOMA terminal Information on Using the Manual and How to Look up in the Manual ............................................................. 1 Easy Search ............................................................... 4 Main Functions of the FOMA SO905iCS .................... 8 Making Full Use of SO905iCS ! ................................ 10 Safety Precautions (Observe Strictly) ....................... 12 Handling Precautions ...................
i-αppli Osaifu-Keitai/ToruCa 249 What is Osaifu-Keitai?, Start an Osaifu-Keitai-compatible i-αppli, What is ToruCa?, Obtain a ToruCa card, Display ToruCa, Manage ToruCa cards, ToruCa setting, IC act. notice, IC card lock, and so on... GPS Function 259 Position location, Location provision, Location notice, Location history, and so on… Full Browser 275 Easy Search/Contents/Precautions 233 What is i-αppli?, Download, Run i-αppli, Auto-start, i-αppli stand-by, Manage i-αppli, and so on...
Easy Search/Contents/Precautions Main Functions of the FOMA SO905iCS “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communication systems (IMT-2000 or International Mobile Telecommunications-2000).
Multiaccess You can use voice call and packet communication simultaneously. You can receive i-mode mail even when you are in a call and you can also make a call while you are using i-mode (P.348). Stand-by books High-Definition Wide VGA Liquid-Crystal Screen Display There are eight unique preinstalled Flash contents which display various information such as bits of knowledge, general knowledge, and picture books wave after wave every time when the stand-by display appears.
Easy Search/Contents/Precautions Making Full Use of SO905iCS ! Videophone Chaku-moji You can have a face-to-face conversation with a person in the distance. You can hear the person’s voice from the speaker without changing any settings, so you can start a conversation soon. You can switch a call to a videophone call during a voice call without hanging up as well (P.50). You can send a message that is displayed in the recipient’s Incoming call display while calling the recipient.
The effective number of pixels: 5,110,000 and 3× optical zoom are employed. Also the FOMA terminal has full recording functions such as the face-detecting auto-focus function or highintensity flash and allows you to use as a real digital camera. The optical zoom can be also used when recording a movie and you can record a movie up to 640×480 dots.
Easy Search/Contents/Precautions Safety Precautions (Observe Strictly) For safe and proper use of the FOMA terminal, please read the “Safety Precautions” prior to use. Keep the Manual in a safe place for future reference. ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage. ■ The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the FOMA terminal is used improperly.
Do Use the battery packs and adapters (including chargers) specified for the FOMA terminal by DoCoMo. The use of products that are not specified may cause the FOMA terminal, battery pack, or other device to leak, overheat, explode, catch fire, or malfunction.
Easy Search/Contents/Precautions Don’t Do Do Do Do not keep in a place that is very humid, dusty, or subject to high temperature. Doing so may cause malfunction. If children use the FOMA terminal, parents or guardians should give them the proper instructions for use. Make sure that they use the FOMA terminal as instructed. Failure to do so may cause injury. Don’t Don’t Keep the FOMA terminal, battery pack, adapter, and UIM out of the reach of babies and infants.
Do Do Always keep the FOMA terminal away from your ear when you talk setting the hands-free function. Also, when you play game or play back music connecting the Earphone/ Microphone to the FOMA terminal, adjust the volume adequately. If the volume is too loud, it may cause difficulty in hearing. Moreover, if you barely hear the surrounding sounds, it may cause an accident. CAUTION Don’t Do Do Do If you have a weak heart, set the vibrator or ring volume carefully.
Easy Search/Contents/Precautions Don’t Don’t Do not place magnetized devices near the FOMA terminal. The strong magnetism may interfere with the operation. If the display is mistakenly damaged and when the liquid crystal is broken, do not drink, absorb, or get it on your skin. If the liquid crystal gets on your eye or mouth, rinse with clean running water, and get medical treatment immediately.
CAUTION Don’t WARNING Don’t Do If any abnormality caused by an external shock, such as deformation or damages by falling is found in the battery pack, stop using the battery pack immediately. Failure to do so may cause the battery pack to leak, overheat, explode, or catch fire, or cause the device to malfunction or catch fire. Stop charging if the FOMA terminal is not charged within the specified charging time. Failure to do so may cause the battery pack to leak, overheat, explode, or catch fire.
Easy Search/Contents/Precautions Don’t Don’t Don’t Don’t Do not touch the FOMA terminal and adapter (including the charger) if you hear thunder. Doing so may cause injury or electric shock from the lightning. Do Do not shor t-circuit the charge terminal of the charger while the power plug is connected to the power outlet or cigarette lighter socket. Do not touch the charge terminal with your hands, fingers, or any part of your body. Doing so may cause fire, malfunction, electric shock, or injury.
If liquid such as water gets into the adapter, immediately remove it from Unplug the power outlet or cigarette lighter socket. Failure to do so may cause electric shock, smoking, or fire. Before cleaning, remove the power p l u g f r o m t h e p owe r o u t l e t o r Unplug cigarette lighter socket. Failure to do so may cause electric shock. Do Handling the UIM CAUTION Do Please be careful not to touch a cut surface when you remove the UIM (IC portion). Failure to do so may damage your hand or fingers.
Easy Search/Contents/Precautions Handling Precautions ˎ The display may get scratched and it may cause malfunction or damage. ◆ Common Precautions ● Do not expose to water. ˎ The FOMA terminal, battery pack, adapter (including the charger), and UIM are not waterproof. Do not use them in a humid place such as bathroom or in the rain. If you carry the FOMA terminal on your body, perspiration may corrode the internal parts of the FOMA terminal and cause malfunction.
ˎ Doing so may cause data loss or malfunction. ● If you conduct any criminal behavior using the FOMA terminal that is a nuisance to the public, you may be subjected to punishment by authorities in accordance with related laws or ordinances (nuisance prevention act, etc.). Please be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones. ◆ Battery Pack Precautions ● The battery pack is a consumable accessory.
◆ FeliCa Reader/Writer Easy Search/Contents/Precautions ● The FeliCa reader/writer function of the FOMA terminal uses extremely weak radio waves, so that no license is required for use as a radio station. ● The FeliCa reader/writer function of the FOMA terminal uses frequencies in the 13.56MHz range. If there is another reader/ writer used in the neighborhood, keep enough distance from it.
◆ Others ® ˎ Contains Flash Lite™ and Adobe® Reader® technology by Adobe Systems Incorporated Flash Lite copyright © 1995-2007 Adobe Macromedia Software LLC. All rights reserved. Adobe Reader copyright © 1984-2007 Adobe Systems Incorporated. All rights reserved. Adobe, Flash, Flash Lite and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. ˎ GestureTek technology is installed in this product. Copyright © 2007, Gesture Tek, Inc.
Easy Search/Contents/Precautions Supplied and Optional Accessories ■ Supplied accessories Manual for FOMA SO905iCS (this manual) (w/Quick Manual P.490) FOMA SO905iCS (w/warranty and back cover SO09) Battery Pack SO02 Li-io n FOMA SO905iCS CD-ROM (“Manual for PC connection setting” (PDF format) and “Kuten Code List” (PDF for mat) are included) ■ Optional accessories FOMA AC Adapter 01/02 (w/warranty and user’s manual) ˎ Other optional accessories (P.
Before Using the Handset Part Names and Functions ........................................................................................ 26 Opening/Closing the FOMA Terminal ........................................................................ 29 About the Style .......................................................................................................... 29 Using the Displays .....................................................................................................
Part Names and Functions Before Using the Handset Connecting the Flat-plug Earphone/ Microphone with Switch (optional) ͦ In-Camera Use to record a still image or movie (P.155, 167) or send the image at your side during a videophone call (P.50). ͧ Display (P.30) ͨ Charge Indicator/FeliCa Sign Lights in red while charging the battery (P.41). Lights in green during iC communication or when the FOMA terminal comes within the communication range with the reading device (P.251, 328).
ͭ /IC Card Lock Key In the stand-by display, press for over a second to lock the IC card function or cancel the lock. To cancel the lock, enter the Security code (P.258). ͼ Lens Cover The caller’s voice is heard from here. ͽ Auto Timer Indicator ͯ Plus JOG (P.28) Ͱ Incoming Indicator Lights during the Camera mode. Flashes while recording or activating the Auto timer (P.150, 169). Flashes when receiving a call/mail. It flashes when there is a missed call or new mail/unread message (P.126).
+JOG (Plus JOG) Before Using the Handset Operation Up arrow key Down arrow key Left arrow key Up Right arrow key arrow key Left arrow key Down arrow JOG key Right arrow key JOG Symbols in this manual Description Move the cursor upward. Press for over a second to move the cursor continuously. Press in the stand-by display to display the Data Box. Move the cursor downward. Press for over a second to move the cursor continuously. Press in the stand-by display to display the Phonebook.
Opening/Closing the FOMA Terminal Before Using the Handset When you open/close the FOMA terminal, hold the FOMA terminal in your hand. To open the FOMA terminal, slide the front surface of the display side upward. To close it, slide the front surface of the display side downward. ● When you open the FOMA terminal, be careful not to touch the keypad. Failure to do so may cause malfunction.
Using the Displays Before Using the Handset ˎ For details on the icons in the Camera mode, see P.154. ˎ The position of the clock in the display can be changed (P.118). ͦ〜ʹ ͵〜; Clock (P.44, 118) Ｍｉｓｓｅｄ ｃａｌｌ １ Notification display (P.32) → Ϳ ͦ ͧ ͨ ͩ ͪ 30 最高１０℃ １０ i-Channel Telop text (P.199) Guide display (P.33) / / / Radio wave condition (Strong Weak) / During i-mode (P.
/ ͭ ͮ ͯ Ͱ ͱ Ͳ ͳ ʹ ͵ Ͷ Incoming call ring volume is OFF (P.109) Incoming mail ring volume is OFF (P.109) Incoming call and mail ring volumes are OFF (P.109) Manner mode is set ( is pink) (P.115) Silent mode is set (P.115) Original manner mode is set ( is blue) (P.115) Public mode (Drive mode) is set (P.69) Personal data lock is set (P.138) Key dial lock is set (P.139) Personal data lock and Key dial lock are set (P.138, 139) IC card lock is set (P.258) During Music&Video Channel reservation (P.
Notification Display Before Using the Handset An icon is displayed in the notification display to alert you, for example, when you cannot answer a call. The icon is displayed from the left in the order of the latest event. Move the cursor to the icon to display the text information and select the icon to check the notification information. The icon is turned off by checking the notification information or pressing for over a second.
Guide Display Display Operation Display Operation Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Press . Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Press . Press or scroll down. Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Press . ｉ−ｍｏｄｅ ｉ．ｃｈ Press . Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Press . ｉ−ｍｏｄｅ ｉ．ｃｈ Press . Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Press Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Press up. Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ ｉ−ｍｏｄｅ ｉ．ｃｈ Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ Ｍａｉｌ ＭＥＮＵ Ｌｉｎｋ .
Kisekae menu Before Using the Handset Menu name My Selection Imaging i-mode Mail i αppli Phone Data Box MUSIC Osaifu-Keitai Own number LifeKit Settings Description Used to access My Selection. Used to access Camera, Movie, easy BlogUp, Music slide show, and Stand-by pictures. Used to access an i-mode function. Used to access an i-mode mail and SMS functions. Used to access an i-αppli function. Used to access mainly related to Phone such as Phonebook, Call record, PushTalk phonebook, and Record message.
Selecting a Function from the Function Menu ˎ The contents of the Function menu vary depending on the functions and displays. For details, see the description of operation for the individual option. ˎ When the numbers and symbols are displayed in the Function menu, press a key on the keypad to activate a function.
Using the UIM Before Using the Handset The UIM (FOMA card) records user information such as your phone number. Insert a UIM in the FOMA terminal to use it. Inserting/Removing the UIM When inserting/removing the UIM (FOMA card), make sure to power off and close the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand. ˎ If you insert the UIM forcibly, it may be damaged. ■ Inserting the UIM 1 Pull the tab and then pull out the tray.
About the Function for Restricting UIM Operation ˎ When you replace the UIM with another one or if you do not have a UIM inserted in the FOMA terminal, you are unable to display or play back the data or files for which the UIM operation restriction function is set or if they are sent using the infrared or iC communication or attached to mail.
About the Differences in UIM Functions Before Using the Handset A UIM (FOMA card) (blue) has the following functional differences from a UIM (green/ white).
Attaching and Removing the Battery Pack ˎ If you attach the battery pack forcibly, the terminal on the FOMA terminal may be damaged. ˎ Holding too hard or attaching/removing the back cover in a manner other than described below may damage it. ■ Attaching the battery pack 1 Slide to remove the back cover in the direction of the arrow while pressing it at the dent por tion with your finger.
Charging the FOMA Terminal Before Using the Handset At the time of purchase, the battery pack is not fully charged. Make sure to fully charge the battery pack before using the FOMA terminal for the first time. About Charging the FOMA Terminal ˎ For details, see the user’s manual of the FOMA AC Adapter 01/02 (optional), FOMA AC Adapter 01 for Global use (optional), or FOMA DC Adapter 01/02 (optional). ˎ The FOMA AC Adapter 01 is only compatible with AC 100 V.
How to Charge the FOMA Terminal 1 Insert the connector of the AC adapter horizontally with the engraved side facing outside into the terminal (the side labeled “ACアダプタ”) of the desktop holder. 2 Lift the power plug of the AC adapter and plug it into an AC 100 V outlet. 3 Insert the FOMA terminal, which has the battery pack attached, to the desktop holder and push it into place. 1 Terminal Insert the connector AC adapter horizontally with the engraved side facing outside.
Before Using the Handset ● During iC communication or when the FOMA terminal comes within the communication range with the reading device while charging the battery, the Charge indicator and FeliCa Sign light at the same time. ● When not using the AC adapter for a long period of time, remove its power plug from the AC outlet. ● Make sure that the phone strap, etc. does not get caught in between the FOMA terminal and the desktop holder. ● The fuse (2.0 A) of the DC adapter is a consumable part.
Powering On/Off 1 Press (PWR) for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and an animation is displayed. After a while, the stand-by display appears. ˎ If you have set the PIN1 code setting to [ON], the PIN1 code input screen appears. Enter the PIN1 code and press (OK) (P.131). To power off Press (PWR) for over two seconds.
Setting the Date and Time Before Using the Handset You can set the date and time either by automatically correcting the time based on the time information obtained from the DoCoMo network or by manually setting the time. Example: Correcting the time automatically 1 From the Menu, select [Settings] → [Management] → [Date/time] and press . Ｄａｔｅ／ｔｉｍｅ Ａｕｔｏ ｔｉｍｅ ａｄｊｕｓｔ ＯＮ Ｍａｎｕａｌ ｃｌｏｃｋ ｓｅｔ [Auto time adjust] : Set the time automatically. [Manual clock set] : Enter the time manually.
Notifying the Recipient of Your Phone Number ˎ The caller ID is important personal information. Carefully decide whether you notify a recipient of your caller ID. 1 From the Menu, select [Settings] → [Management] → [NW Services] → [Notify Caller ID] → [Set Notification] and press 2 Select [Notify]/[Not notify] and press . . Before Using the Handset When placing a call, your phone number can be shown in the display of the recipient’s phone you are calling.
Before Using the Handset ● You cannot originate a PushTalk call from the Own number display of the B mode. ● When you replace the UIM (From 2in1 subscriber to 2in1 subscriber) while 2in1 is used, to obtain a correct Number B, you need to perform the 2in1 function OFF (P.396) first, and then set the 2in1 to ON again. When you replace the UIM (From 2in1 subscriber to 2in1 non-subscriber), perform the 2in1 function OFF.
3 Press Icon and save each item at the Detail display. Category My picture i-motion※ File format GIF/JPEG MP4 File size Max. 100K bytes Max. 10M bytes Image size Max. [QVGA(240×320)] Max. [VGA(640×480)] ※ Some i-motion may not be set. ˎ It may take time to display a large-sized image. ˎ To use an image after recording it by the camera, select [Camera]/[Movie] (P.155, 167). You can record an image in the following sizes.
Voice/Videophone Calls ■ Placing Voice/Videophone Calls What is Videophone?.................................................................................................. 50 Placing a Voice/Videophone Call ................................................................................ 51 Switching to/from Voice/Videophone Call ............ 54 Using the Redial/Received Record ...............................
What is Videophone? Voice/Videophone Calls You can use the videophone function between DoCoMo videophone compatible terminals. You can use videophone to talk to the recipient/caller while looking at each other’s image. You can send a still image, substitute image, or Chara-den character instead of your own. DoCoMo’s videophone complies with “3G-324M※1 standardized by 3GPP※2 for global standard”. The FOMA terminal cannot be connected to a videophone that uses a different system.
Operations during a Videophone Call Voice/Videophone Calls Operation Key operation S w i t c h b e t w e e n c a m e r a Press (MySide/Sub). Every time you press the key, the image/substitute image display is switched between camera image/substitute image. (In/Out). Every time you press the key, the camera is Switch cameras Press switched between the In-/Out-camera. You can also switch between the In-/Out-camera by opening/ closing the lens cover. Switch ON/OFF of the hands- Press ( ).
2 Press Ｃａｌｌｉｎｇ Voice/Videophone Calls 3 Press . A ringing sound is heard when the call is connected. To place a videophone call Press (V.phone). When the call is answered, your image is sent to the recipient and the call is switched to the hands-free operation that allows you to hear the recipient’s voice from the speaker. When 2in1 is set to the Dual mode Select [Number A]/[Number B] (P.394). When a busy tone sounds The line is busy. Press to hang up and call again after a while.
Using the Hands-free Function Voice/Videophone Calls ● When you place a videophone call to a terminal that is not equipped with a videophone function, or when a recipient is outside of the service area or the phone is powered off (even if the FOMA terminal has the videophone function), your call is not connected.
Entering a timer “T” Voice/Videophone Calls To dial an inside line number following an outside line number, enter “T (timer)” between the outside and inside line numbers. After a preset interval in seconds, the inside line number is dialed following the outside line number. An interval of about one second is added for every timer (T) entry. You can enter “T” consecutively to make the interval longer. 1 Press for over a second in the phone number input display. “T” is entered.
Using the Redial/Received Record Voice/Videophone Calls ● If packet communication is in progress, it is disconnected and the FOMA terminal is switched to videophone. ● When the call is put on hold on the recipient or while the recipient is performing packet communication, you cannot switch to videophone. ● The switching operation takes about five seconds. It may take time depending on the radio wave condition.
Example: Displaying the Redial record 1 Press ( ) in the stand-by display. Voice/Videophone Calls The Redial record display appears. To display the Received record Press ( ) in the stand-by display. To display the Dial frequency record Press in the Redial record display. To display phone numbers When saved in the Phonebook, the name and phone type of a recipient are displayed instead of the phone number. Press to switch the display temporarily between names and phone numbers.
Displaying the Detailed Information of the Redial/Received Record 1 From the call record display, select a call record and press Redial record Ｒｅｃｅｉｖｅｄ ＵｓｒＳｅｔ Call type ２／１０ Ｓｕｎ １０：０５ ドコモ太郎 ０９０ＸＸＸＸＸＸＸＸ 付加番号１ ０９０ＸＸＸＸＸＸＸＸ Call type ２／１０ Ｓｕｎ １０：０５ ドコモ太郎 ０９０ＸＸＸＸＸＸＸＸ １２ｓｅｃ 付加番号１ ０９０ＸＸＸＸＸＸＸＸ Ｕｒｇｅｎｔ Phone type Multi Number type Phone type Ring time for a missed call Multi Number type Chaku-moji message Voice/Videophone Calls Ｒｅｄｉａｌ (Detail).
Setting the Chaku-moji Voice/Videophone Calls When you place a voice or videophone call, you can send a message (Chaku-moji) that is displayed in the recipient’s Incoming call display in order to notify the purpose of the call even before this recipient answers. Ｉｎｃｏｍｉｎｇ ｃａｌｌ Chaku-moji Chaku-moji disappears when you start talking on the phone. Chaku-moji can be checked in the detailed information display of the Received Record (P.57).
2 Select the Chaku-moji display style and press . The display style for Chaku-moji is set. Placing a Call with a Chaku-moji Message 1 Enter a phone number in the stand-by display and press (Option). The Call menu appears. 2 Select [Chaku-moji] and press Ｓｅｌｅｃｔ ｔｈｅ ｗａｙ ｔｏ ｉｎｐｕｔ ｃｈａｋｕ−ｍｏｊｉ Ｎｏｎｅ ｓｐｅｃｉｆｉｅｄ Ｃｒｅａｔｅ ｍｅｓｓａｇｅ Ｓｅｌｅｃｔ ｍｅｓｓａｇｅ . [None specified] : Place a call without a Chaku-moji message. [Create message] : Create a Chaku-moji message and place a call.
Changing the Caller ID Setting ON/OFF for an Individual Call <186/184> You can choose whether to notify a recipient of your phone number (caller ID) every time you place a call. Voice/Videophone Calls ˎ The caller ID is important personal information. Carefully decide whether you want to notify a recipient of your caller ID. You can use the following methods to notify or not notify your caller ID. Presetting for all calls Use the Set Notification to set [Notify]/[Not notify] (P.45).
2 Set each item. 3 Press (Call). The call is dialed according to the set call condition. Setting a Prefix You can save up to three specific numbers (prefixes) to be added at the beginning of a phone number when you place a call. Voice/Videophone Calls ● A call condition which cannot be set does not appear.
■ Placing an international call by using “+” When you enter “+” at the beginning of a phone number, you can place an international call without entering an international access number such as “009130010” (P.54). ˎ The Auto conversion of the Int’l dial assist is set to [ON] at the time of purchase. An international access number is entered automatically.
2 Select [ON]/[OFF] at [Auto conversion]. [ON] : Automatically add the additional number you set for the Int’l prefix. [OFF] : Do not automatically add the additional number. 3 Select [Int’l prefix] and press . The Int’l prefix setting display appears. . Ｉｎｔ ｌ ｃａｌｌ１ Ｎａｍｅ Ｗｏｒｌｄ Ｃａｌｌ Ｉｎｔ ｌ ａｃｃｅｓｓ Ｎｏ． ００９１３００１０ 5 Enter a name in the name field and an international access number in the international access number field.
2 Select [ON]/[OFF] and press . The Sub-address is set. To place a call by specifying a sub-address In the stand-by display, enter a phone number + or (V.phone).
Voice/Videophone Calls ● The incoming call display and ring tone operation follow the FOMA terminal settings. ● When a setting is made for hearing sound from the hands-free device, a ring tone sounds from the hands-free device even if the FOMA terminal is set to the Manner mode or its Ring volume is set to [OFF]. ● Even if you connect the FOMA terminal to a hands-free device, the Public mode (Drive mode) and Record message function operate normally.
2 Press to hang up. Voice/Videophone Calls (Call) instead of . ● When you receive a voice call, you can answer it by pressing to , , or to When you set the Any key answer to [ON], you can also press answer a call (P.67). (V.phone) instead of ● When you receive a videophone call, you can answer it by pressing . To answer a call with a substitute image, press (Sub) (P.76). ● When the Slide open setting is set to [Calling], you can answer a voice/videophone call just by opening the FOMA terminal (P.67).
Pressing a Key on the Keypad to Receive a Call You can set to answer a call by pressing a key on the keypad instead of pressing when you receive a voice or PushTalk call. the Menu, select [Settings] → [Call] → [Call assist] → [Any key ans] and press . [ON] : Enable to answer a voice or PushTalk call also by pressing to [OFF] : Disable to answer a voice or PushTalk call by pressing to , To answer a voice call, press or (Call) ( , , or PushTalk call).
● When the Flat-plug Earphone/Microphone with Switch (optional) is connected, the Setting when folded is disabled and the call continues even if you close the FOMA terminal. If it is during a videophone call that you close the FOMA terminal, a substitute image is sent. Voice/Videophone Calls Using the Low Voice Feature You can set the FOMA terminal so that the recipient can hear your voice at a normal volume level even if you speak in low voice during a voice call.
2 When ready to answer the call, press . The On hold is canceled and you can talk. Using the Public Mode (Drive Mode) The Public mode is an automated answering service which takes into account the manners in highly public places.
Using the Public Mode (Power off) Voice/Videophone Calls The Public mode (Power off) is an automated answering service which takes into account the manners in highly public places.
The Caller ID Display Request Service When a voice call is received ˎ After the guidance is played back to inform the caller that the call is not able to be connected, the call is disconnected if the caller is saved as a nuisance caller. ˎ After the guidance for the Public mode is played back, the call is disconnected if the caller is not saved as a nuisance caller. ˎ After the caller ID request guidance is played back, the call is disconnected if the caller does not notify the phone number.
Recording Caller’s Messages When Unable to Answer Calls When the Record message/Videophone message is set, the FOMA terminal can record a caller’s message when you are unable to answer a call. Voice/Videophone Calls ˎ The FOMA terminal can record up to three record messages and videophone messages, each for up to about 15 seconds. If three record messages have been recorded, the Record message does not function.
Setting the Operation of the Record Message 1 Press in the stand-by display, select [Set rec msg], and press . Ｓｅｔ ｒｅｃｏｒｄ ｍｅｓｓａｇｅ 2 Enter the time before starting the answering message at [To answer]. Enter from 000 to 120 seconds. Voice/Videophone Calls ＯＦＦ ０１３ ｓｅｃ （０００−１２０） Ａｎｓｗｅｒ ｉｍｇ（Ｖ．ｐｈｏｎｅ） テレヒ゛電話動作中 Ｒｅｃｏｒｄ ｉｍｇ（Ｖ．ｐｈｏｎｅ） テレヒ゛電話動作中 Ｓｅｔ Ｔｏ ａｎｓｗｅｒ 3 Select an image to be sent when answering a call from My picture of the Data Box at [Answer img(V.phone)]. ˎ You can set the following files.
Recording a Caller’s Message When Unable to Answer a Call Just Receiving You can start the Record message for temporary use when you receive a voice or videophone call even if the Record message is [OFF]. Voice/Videophone Calls ˎ If three record messages are recorded when the FOMA terminal receives a voice call, the Quick record message function cannot be operated.
Deleting a Record Message/Videophone Message/Voice Memo You can record up to three record messages, three videophone messages, and three voice memos. Delete unnecessary record/videophone messages or voice memos. 1 Press in the stand-by display, select [Play rec msg], and press . To delete a videophone message Press in the stand-by display and select [Play Vphone msg]. To delete a voice memo Press in the stand-by display and select [Play voice memo].
Setting the Videophone Operation Setting the Display to Be Used in a Videophone Call Voice/Videophone Calls You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. 1 From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press . [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Setting the Videophone Image Quality You can set the quality of an image to be sent to the recipient. 1 From [Prefer img qual] : Send an image with priority on image quality. [Normal] : Send an image by keeping a balance between image quality and movement. [Prefer motion] : Send an image with priority on movement. 2 Select the quality of an image to be sent and press . The Visual preference is set.
Setting How to Answer a Videophone Call during i-mode You can set how to answer a videophone call received during i-mode or packet communication, for example, sending or receiving mail. Voice/Videophone Calls 1 From the Menu, select [Settings] → [Call] → [Videophone] → [V.ph while . packet] and press [Prefer V.phone] : Receive a videophone call. When you answer the videophone call, the packet communication in progress is disconnected.
PushTalk What is PushTalk? ..................................................................................................... 80 Originating a PushTalk Call ....................................................................................... 82 Adding a Member during PushTalk Communication .................................................. 83 Receiving a PushTalk Call ......................................................................................... 84 Saving Data in the PushTalk Phonebook ...
What is PushTalk? You can communicate among several persons (up to five persons including yourself) to display the PushTalk phonebook, selecting with a simple operation of pressing recipients, and pressing . Every time you press (speak), you are charged for PushTalk communication. PushTalk ˎ For more details on PushTalk or compatible models, see the DoCoMo’s website or “Mobile Phone User’s Guide【Network services】”.
Operations during PushTalk Communication Operation Speak Switch ON/OFF of the hands-free operation Adjust the volume of the caller’s voice Terminate a PushTalk call Receive a voice call (Add). This operation is enabled only when you originate a Press PushTalk call. Press ( ). Every time you press the key, the ON/OFF setting is switched. Press . Press PushTalk Add a member Key operation When the floor is open, you can speak only while you press and hold .
Originating a PushTalk Call ˎ You cannot originate a PushTalk call during a voice call, a videophone call, or data communication, or while the B mode is set in 2in1. ˎ If you originate a PushTalk call during i-mode communication, the i-mode communication is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli. ˎ Number B of 2in1 cannot be used for PushTalk and PushTalkPlus services. PushTalk 1 Enter a phone number in the stand-by display. 2 Press .
Originating a PushTalk Call from the Call Record You can originate a PushTalk call using the Redial and Received records. ˎ You cannot originate a PushTalk call using the call records of Number B when 2in1 is used. Example: Originating a PushTalk call from the Received record 1 Press ( ) in the stand-by display. 2 Select a received record and press PushTalk The Received record display appears. . When a PushTalk call is originated, the signal tone sounds.
● Members added during PushTalk communication are not displayed in the detailed information of the Redial/Received record. ● You can add a party who uses a PushTalk-compatible model, as a PushTalk group member. However, this added member is not displayed on the displays of non-compatible models and the signal tone does not sound either. Receiving a PushTalk Call PushTalk When you receive a PushTalk call, you are notified by flashing indicator, ring tone, vibrator, etc.
Saving Data in the PushTalk Phonebook ˎ When 2in1 is set to the B mode, you cannot save data in the PushTalk phonebook. ˎ When 2in1 is set to the Dual mode, you cannot save the phonebook data for which the Phonebook 2in1 setting is set to [B] in the PushTalk phonebook. ˎ When 2in1 is set to the A mode, the member for which the Phonebook 2in1 setting is set to [B] is not displayed. 1 Press in the stand-by display and press PushTalk You can save up to 1,000 members in the PushTalk phonebook.
Saving a Group 1 Press in the stand-by display and press (Func). The Function menu appears. 2 Select [Group setting] and press . PushTalk The Group setting display appears. To display group numbers When saved, group icons are displayed instead of group numbers. Press the display temporarily between group icons and group numbers. 3 Select a group and press . Ｅｄｉｔ ｇｒｏｕｐ ３ Ｇｒｏｕｐ ｎａｍｅ グループ３ Ｉｃｏｎ 4 Enter a group name at [Group name].
Originating a PushTalk Call Using the PushTalk Phonebook If you save persons as members in the PushTalk phonebook, you can originate a PushTalk call to several persons. ˎ When 2in1 is set to the B mode, you cannot use the PushTalk phonebook. ˎ When 2in1 is set to the Dual mode, you cannot use members for which the Phonebook 2in1 setting is set to [B]. in the stand-by display, select a member, and press . “ ” appears for the selected member.
2 Select a group and press . When a PushTalk call is originated, the signal tone sounds. To originate a call to specific members by selecting them from a group Select a group → members and press . Ｄｉａｌｉｎｇ ＰＴ ｇｒｏｕｐ ○○○同好会 携帯あき子 携帯はる子 ドコモ一郎 ドコモ二郎 PushTalk To speak Press hold Ｏｎ ＰｕｓｈＴａｌｋ Ｍｙｓｅｌｆ ○○○同好会 携帯あき子 携帯はる子 ドコモ一郎 ドコモ二郎 3 Press while the floor is open. You can speak while you press and . Ｃａｌｌｉｎｇ Ｃｏｎｎｅｃｔｅｄ Ｃｏｎｎｅｃｔｅｄ Ｃｏｎｎｅｃｔｅｄ to end the communication.
Using the PushTalk Phonebook You can connect to the network and use the PushTalkPlus service (P.80). ˎ To use the PushTalkPlus service, you must subscribe to this service. 1 Press in the stand-by display and press (Func). The Function menu appears. PushTalk 2 Select [NW connection] → [Yes] and press . The call is connected to the network.
Setting How to Answer a Voice Call during PushTalk Communication You can set how to answer a voice call when you receive it during PushTalk communication. 1 From the Menu, select [Settings] → [Application] → [PushTalk] → [P-Talk . arrival act] and press PushTalk : Receive a voice call and you can answer it. : Reject an incoming voice call. The missed call notification icon appears and the call is saved in the Received record.
Setting the Operation for the FOMA Terminal Being Closed during PushTalk Communication You can end a call or switch a call to the hands-free operation by closing the FOMA terminal during PushTalk communication. You can also continue the communication. 1 From the Menu, select [Settings] → [Management] → [Slide setting] → . [Setting when folded] → [PushTalk] and press PushTalk [Continuous call] : Continue the PushTalk communication.
Phonebook Phonebooks the FOMA Terminal Can Use ................................................................ 94 Saving an Entry in the FOMA Terminal Phonebook ... 95 Saving an Entry in the UIM Phonebook ................................. 98 Saving the Redial/Received Record in the Phonebook ............................................. 99 Saving a Group ..................................................................................
Phonebooks the FOMA Terminal Can Use The FOMA terminal is equipped with two types of phonebooks, the FOMA terminal phonebook, which you can set up with various functions, and the UIM (FOMA card) phonebook, which can be used with other FOMA terminals. Use either phonebook to your convenience. ˎ You can also use the PushTalk phonebook dedicated for PushTalk that can be created using data saved in the FOMA terminal phonebook (P.85). The table below shows the data you can save in each phonebook.
Saving an Entry in the FOMA Terminal Phonebook Phonebook ● For the order of priority between call image, ring tone, and incoming indicator color, see P.111. ● When you receive a call or mail from a person saved as Secret, the regular ring tone, incoming image and incoming indicator color are used, and a name of the caller/sender is not displayed. To enable the settings of a person saved as Secret or a group that includes a person saved as Secret, set the Secret display to [ON].
Icon Phonebook 4 Press Icon Settings When the recipient saves a Secret code in a mail address (phone number@ docomo.ne.jp), enter the Secret code. When sending mail, the Secret code is automatically added. ˎ When you save a mail address as “phone number + Secret code@docomo. ne.jp” in the Phonebook, if you save a Secret code, you cannot send mail or reply mail to this address. To avoid this problem, change the mail address to “phone number@docomo.ne.jp” and save a Secret code.
5 Press Icon and save each item at the Setting display. Settings Select the Des substitute image to be sent during a videophone call from My picture/Chara-den of the Data Box. ˎ You can set the following files. Category My picture Chara-den File format GIF/JPEG − File size Image size Max. 50K bytes Max. [QCIF(176×144)] Max. 100K bytes − Phonebook ˎ To specify no substitute image, select [None]. A substitute image or your own image set in the Set outgoing image (P.76) is sent.
Saving an Entry in the UIM Phonebook Up to 50 entries can be saved in the UIM (FOMA card) phonebook. 1 Press ( ) in the stand-by display and press 2 Select [UIM] and press (Create). . To save an entry in the FOMA terminal phonebook Select [Main memory] (P.95). Ｂａｓｉｃ Phonebook グループなし 3 Save each item. Icon Settings Enter a name within 10 full-width or 21 half-width characters.
Saving the Redial/Received Record in the Phonebook A phone number saved in the record can be directly added to the Phonebook. Example: Saving a received record in the FOMA terminal phonebook as a new entry 1 Press ( ) in the stand-by display. To save a number from the redial record Press ( ) in the stand-by display. (Save). The screen for selecting where to save appears. 3 Select [Ordinary PB] and press .
Saving a Group Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook. ˎ You cannot change [ グループなし] in the UIM phonebook. Example: Saving a group in the FOMA terminal phonebook 1 Press (Func) in the Phonebook. The Function menu appears. Phonebook 2 Select [Group setting] and press Ｎｏ Ｇｒｏｕｐ Ｆｒｉｅｎｄｓ Ｏｆｆｉｃｅ Ｇｒｏｕｐ3 Ｇｒｏｕｐ４ Ｇｒｏｕｐ５ Ｇｒｏｕｐ６ Ｇｒｏｕｐ７ Ｇｒｏｕｐ８ Ｇｒｏｕｐ９ Ｇｒｏｕｐ１０ Ｇｒｏｕｐ１１ 3 Select a group and press Ｂａｓｉｃ .
Displaying the Phonebook You can use the Phonebook to perform various operations. Example: Displaying the FOMA terminal phonebook 1 Press か さ た ( ) in the stand-by display. な は ま や ら ˎ When 2in1 is set to the Dual mode, the Phonebook 2in1 setting is confirmed by the following icons. A mode B mode Common To change the phonebook being displayed From the Function menu, select [Change to UIM]/[Change to Main]. “ ” appears in the UIM phonebook.
Searching the Phonebook You can search the desired data of the Phonebook by entering a reading, memory number, and phone number. Example: Phonebook is ordered alphabetically 1 Press ( ) in the stand-by display. 2 Enter a reading. Phonebook か さ た な は ま や ら ドコモ一郎 ドコモ三郎 ドコモ二郎 ドコモ太郎 タ カナＡａ１２ Every time you enter a letter, the cursor moves to the data which is the closest one to the entered reading. When the Phonebook is ordered by the group Enter a reading.
Editing a Phonebook Entry 1 From the Phonebook, select an entry and press 2 Press . (Edit). The Edit phonebook display appears. 3 Edit each item. 4 Press (Complete). The edited data is saved in the Phonebook. Deleting a Phonebook Entry Phonebook ˎ Follow the same steps as in “Add to FOMA terminal phonebook” (P.95, step 3 to 5) or in “Add to UIM phonebook” (P.98, step 3). You can delete Phonebook entries using three methods.
Checking the Number of Entries Saved You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and entries saved as Secret. 1 Press (Func) in the Phonebook. The Function menu appears. 2 Select [Memory status] and press . Phonebook : Display the number of entries saved in the FOMA terminal phonebook (including entries saved as Secret).
Storing (Restoring/Updating) the Phonebook at the Data Security Service Center You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center. You can update or restore the stored Phonebook by connecting to the Data Security Service Center. ˎ Data Security Service is a paid service that requires a subscription. For details on this service, see the “Mobile Phone User’s Guide【i-mode】FOMA version”.
Sound/Display/ Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail .... 108 ■ Setting the Ringer Setting the Sounds of the FOMA Terminal ....................................... 111 Adjusting the Volume of Caller’s Voice ....................................................... 112 Adjusting the Volume While Playing Flash Movie ............................... 112 Adjusting the Volume While Running i-αppli Software .......
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk call, or mail, etc.). Example: Performing incoming mail settings 1 From the Menu, select [Settings] → [Call] → [Incoming set] and press .
4 Select an image from the Data Box at [Received image]. ˎ You can set the following files. Category File format File size My picture GIF/JPEG Max. 250K bytes SWF Max. 100K bytes To check the Received image Move the cursor to the Received image and press 5 Select Image size Max. [Stand-by(480×864)], Max. W480×H288 for GIF animation − (Play). a ring tone from MUSIC/i-motion/Melody of the Data Box at [Ring tone]. ※ Some files may not be set. You cannot set an i-motion with video track only.
7 Set a vibration pattern at [Vibrator]. Ｓｅｌｅｃｔ ｖｉｂｒａｔｏｒ Ｐａｔｔｅｒｎ１ Ｐａｔｔｅｒｎ２ Ｌｉｎｋ ｍｅｌｏｄｙ ＯＦＦ Sound/Display/Light Settings [Pattern1] : Set a short intermittent vibration. [Pattern2] : Set a long intermittent vibration. [Link melody] : Set vibration to be synchronized with the vibration pattern of the melody. When you set the ring tone to [Silent] or the melody is not specified with a vibration pattern, [Pattern1] is used. [OFF] : Do not set the vibrator.
Setting the Sounds of the FOMA Terminal You can set to turn on/off the sound effect that can be used when canceling the Lock key or charging starts and is completed. You can also set whether the 3D sound is played back through the stereo speaker and set the keypad sound volume. 1 From press Sound/Display/Light Settings ● If several ring tones, call images, and incoming indicator colors are set for voice/videophone call/mail, the following priority is applied. 1.
Adjusting the Volume of Caller’s Voice The volume of caller’s voice during a voice, videophone, or PushTalk call can be adjusted in six levels from level 1 (smallest) to level 6 (largest). 1 From press the Menu, select [Settings] → [Call] → [Call setting] → [Volume] and . The Volume display appears. 2 Use to adjust the volume and press (OK). Sound/Display/Light Settings Select from [1 to 6]. The volume of caller’s voice is set. during a call.
Setting Whether to Prioritize the i-αppli Sound You can set whether to prioritize the i-αppli sound when the MUSIC Player and i-αppli are activated simultaneously. 1 From the Menu, select [i-appli] → [i αppli setting] → [Pref. i αppli sound] and press . 2 Select [preference]/[unpreference] and press . [preference] : You hear the i-αppli sound. [unpreference] : You hear the sound of the MUSIC Player or Music&Video Channel.
5 Select [ON]/[OFF] of the incoming indicator at [Color]. ˎ You can set the incoming indicator to the Position location and Location notice functions. 6 Press (Complete). The sound volume level and incoming indicator ON/OFF settings to be applied when you use the GPS function are set. Setting the Poor Signal Quality Alert You can set to inform you with alarm of the possibility of the call being disconnected during a voice call due to the radio wave condition.
Changing the Ringing Sound You can change the ringing sound which a caller hears to a melody with sense of the season or popular music, etc. ˎ This service is a paid service that requires a subscription. For more details about this service, see the “Mobile Phone User’s Guide【Network services】”. 1 From the Menu, select [Settings] → [Call] → [Melody Call] and press . The screen for confirming whether to connect a site appears. 2 Select [Yes] and press . 3 Set each item.
■ Functions of each mode Sound/Display/Light Settings Original manner Manner Silent Initial setting Setting range Vibrator (P.110)※1 Follow each setting OFF OFF Pattern1/Pattern2/ (Vibrates in Pattern1 Link melody/Follow when [OFF] is set.) each setting/OFF Phone volume (P.109)※2 OFF OFF SD (STEP DOWN) SU (STEP UP)/ SD (STEP DOWN)/ 6 to 1/OFF Mail volume (P.109)※3 OFF OFF 4 6 to 1/OFF Alarm volume (P.357, 361) OFF OFF 4 6 to 1/OFF Keypad sound (P.111)※4 OFF OFF 1 2 to 1/OFF Keyguard rel (P.
Changing the Original Manner The operations of the Original manner can be customized. For the items you can set, see “Functions of each mode” (P.116). Example: Setting the battery alarm 1 Press in the stand-by display, select [Original manner], and press . Ｏｒｉｇｉｎａｌ ｍａｎｎｅｒ Ｖｉｂｒａｔｏｒ Ｃｈａｒｇｅ ｓｏｕｎｄ Ｂａｔｔｅｒｙ ＡＬＭ Ｗｈｉｓｐｅｒ ｍｏｄｅ ＯＦＦ ＳＤ ４ ４ １ Sound/Display/Light Settings Ｐｈｏｎｅ ｖｏｌｕｍｅ Ｍａｉｌ ｖｏｌｕｍｅ Ａｌａｒｍ ｖｏｌｕｍｅ Ｋｅｙｐａｄ ｓｏｕｎｄ Ｋｅｙｇｕａｒｄ ｒｅｌ ＯＮ ＯＮ ＯＮ ＯＦＦ 2 Select [ON]/[OFF] at [Battery ALM].
To set the i-αppli stand-by display Select [i αppli list] and a software supporting i-αppli stand-by display from the list of i-αppli software. To set the Stand-by pictures Select [Stand-by pictures] (P.119). To set Stand-by books Select [Preinstall] and select from [世界遺産1], [世界遺産2], [四字熟語], [魚へんの漢字], [日 本の首相], [日本の温泉], [名言], or [恋の名言]. To display no image Select [None specified]. To check the image Move the cursor to the image and press (Play).
11 Press and select [ON]/[OFF] at [Soft key]. The Soft key is set. Sound/Display/Light Settings ● If you change the setting so that the i-Channel Telop text is displayed when an i-motion or i-αppli is set for the stand-by display, the screen for confirming whether to cancel the setting for the stand-by display appears. If you select [Yes], the i-motion or i-αppli set for the stand-by display is canceled and the image for the stand-by display is changed to that of the Kisekae menu.
4 Select [Select folder] and press . The screen for selecting a folder appears. To restore the specified folder to the default setting Move the cursor to the folder specified field, press (Reset), and select [Yes]. 5 Select a folder from My picture of the Data Box at the folder specified field and press . ˎ Up to five folders can be specified. 6 Select [Yes]/[No] at [Update image]. The Stand-by pictures are set.
Setting the Display for Incoming and Outgoing Calls You can set whether the Des call display or the name saved in the Phonebook is displayed. 1 From the Menu, select [Settings] → [Call] → [Call display] and press Ｓｅｔ ｃａｌｌ ｄｉｓｐｌａｙ Ｐｈｏｎｅｂｏｏｋ ｉｍａｇｅ ＯＮ Ｎａｍｅ ＯＮ Ｄｉｓｐ． ｃａｌｌ／ｒｃｖ． Ｎｏ． Ｎｏｎｅ ｓｐｅｃｉｆｉｅｄ . 2 Select [ON]/[OFF] at [Phonebook image]. [ON] : Display the image set for the Des call display in the Phonebook when placing/ receiving a voice or videophone call.
3 Set the display light brightness at [Adjust light]. Select from [1 to 5]. To reset to the default brightness Press (Reset). 4 Select [ON]/[OFF] of the Keypad light at [Keypad light]. 5 Select [Backlight always on] and press Ｂａｃｋｌｉｇｈｔ ａｌｗａｙｓ ｏｎ Sound/Display/Light Settings Ｃｈａｒｇｉｎｇ Ｖｉｄｅｏｐｈｏｎｅ Ｉｎｔｅｒｎｅｔ Ｐｉｃｔ． ｓｈｏｏｔ Ｍｏｖｉｅ ｓｈｏｏｔ Ｍｏｖｉｅ ｐｌａｙ ＯＦＦ ＯＮ ＯＦＦ ＯＮ ＯＮ ＯＮ . [Charging] : Set whether to keep the light on during charging. [Videophone] : Set whether to keep the light on during a videophone call.
Example: Setting an image as the icon for i-mode 1 From the Menu, select [Settings] → [Display] → [Menu setting] and press . Ｍｅｎｕ ｓｅｔｔｉｎｇ Ｓｔａｒｔ ｍｅｎｕ ｓｅｔｔｉｎｇ Ｋｉｓｅｋａｅ ｍｅｎｕ Ｉｃｏｎ ｓｅｔｔｉｎｇ [Start menu setting] : Set the menu to be displayed when you press (MENU) in the stand-by display. [Icon setting] : Set the icons to be displayed in the Standard menu display (P.33). 2 Select a display menu at [Start menu setting]. 3 Select [Icon setting] and press . The Icon setting display appears.
Example: Setting a Kisekae tool 1 From the Menu, select [Settings] → [Display] → [Kisekae setting] and press . Ｋｉｓｅｋａｅ ｓｅｔｔｉｎｇ Ｋｉｓｅｋａｅ Ｔｏｏｌ Ｗｈｉｔｅ Ｓｃｒａｐｂｏｏｋ Ｃｏｌｏｒ ｔｈｅｍｅ ｓｅｔｔｉｎｇ Ｗｈｉｔｅ ＆ Ｇｏｌｄ [Kisekae Tool] : Set the Kisekae tool. [Color theme setting] : Set the colors such as background color or coloration pattern at once. 2 Select data from Kisekae Tool of the Data Box at [Kisekae Tool]. Sound/Display/Light Settings To check an image Move the cursor to the image and press (Play).
Resetting the Settings of the Display and Sound You can reset the settings of the display and sound set by the Kisekae Tool to the default settings. 1 From the Menu, select [Settings] → [Management] → [Reset] → [Reset . display/sound] and press The Security code screen appears. ˎ The Reset display also appears by pressing Select [Reset display/sound] and press . 2 Enter the Security code and press for over a second in the stand-by display. (OK). 3 Select [Yes] and press .
Resetting the Operation History of the Kisekae Menu Some Kisekae menus save the frequencies in use of menu items as an operation history and change the menu items automatically. The Operation history can be deleted. 1 From the Menu, select [Settings] → [Management] → [Reset] → [Reset menu log] and press . The Security code screen appears. ˎ The Reset display also appears by pressing Select [Reset menu log] and press .
Setting the Font Size Setting the Font Size At Once You can set the size of fonts to be used for displaying the Kisekae menu, Phonebook, Call record, mail/SMS, and sites or for entering a word at once. 1 From the Menu, select [Settings] → [Display] → [Font size] → [All font size setting] and press . 2 Select a font size to be set at once and press . The All font size setting is set. ● Even if the Select language is set to English, when you set the font size to [Large disp.
● Even if you change the mail font size, the size of Deco mail pict. does not change. ● The font size of the Mail list is displayed in [Extra large] when [Extra extra large] or [Extra large] is selected at [Mail] of the Individual font size, or in [Medium] when [Large], [Medium], or [Small] is selected.
Security Settings ■ About Security Codes Security Codes Used on the FOMA Terminal .......................................................... 130 Changing the Security Code .............................................................. 132 Setting the PIN Code ............................................................................. 132 Canceling the PIN Lock ............................................................................................
Security Codes Used on the FOMA Terminal Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the Security code for operating the mobile phone, the network security code necessary for the network services, i-mode password, etc. are available. Make use of the FOMA terminal using an appropriate security code according to the purpose.
i-mode Password The 4-digit “i-mode password” is required when saving/deleting My Menu or subscribing/canceling message service or i-mode charged service, etc. (There may be other passwords for the i-mode used by IP (information service providers).) The i-mode password is set to “0000” at the time of subscription. It can be changed by yourself. You can change the i-mode password using i-mode, by selecting [i Menu] → [English iMenu] → [Options] → [Change i-mode Password].
Changing the Security Code 1 From press the Menu, select [Settings] → [Management] → [Change code] and . Ｉｎｐｕｔ ｓｅｃｕｒｉｔｙ ｃｏｄｅ 2 Enter the current Security code and press (OK). The entered Security code is displayed as asterisks (＊). 3 Enter the new Security code and press (OK). Security Settings Enter a 4- to 8-digit code. 4 Select [Yes] and press . The Security code is changed.
Changing the PIN1 Code/PIN2 Code ˎ To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code 1 From the Menu, select [Settings] → [Management] → [UIM setting] and press . The Security code screen appears. 2 Enter the Security code and press (OK). The UIM setting display appears. 3 Select [Change PIN1 code] and press 4 Enter the current PIN1 code and press (OK). Security Settings Ｉｎｐｕｔ ＰＩＮ１ ｃｏｄｅ． ３ｔｉｍｅｓ ｌｅｆｔ . To change the PIN2 code Select [Change PIN2 code].
Various Locking Functions The FOMA terminal offers many lock functions to assure safety operation, such as preventing unauthorized use of the FOMA terminal, protecting the Phonebook from being seen by others. You can use any mix of these functions depending on the purpose. Security Settings 134 Functions Description Lock all Prevent others from using the FOMA terminal (P.135). Omakase Lock Lock the FOMA terminal to prevent others from using it.
Locking the Keypad to Prevent Unauthorized Use You can set the Lock all to prevent others from using the FOMA terminal. When the Lock all is set, you cannot perform any operation other than powering on/off the FOMA terminal and answering a voice or videophone call. 1 From the Menu, select [Settings] → [Lock/Security] → [Lock all] and press . The Security code screen appears. 2 Enter the Security code and press (OK). The screen for confirming whether to set the Lock all appears.
Using the Omakase Lock Omakase Lock is a service that allows you to lock the FOMA terminal remotely if you lose the FOMA terminal by requesting DoCoMo or using a procedure available on the My DoCoMo website. Use this service to protect your important private information and Osaifu-Keitai. You can also request DoCoMo by a call, etc. to unlock the FOMA terminal. ※ Omakase Lock is a paid service.
Restricting Placing/Receiving Calls You can disable all functions that involve calls or communication, such as placing/ receiving a voice or videophone call, originating/receiving a PushTalk call, and sending/receiving mail. You cannot use infrared communication, infrared remote control, and iC communication, either. 1 From the Menu, select [Settings] → [Call] → [Self mode] and press . The screen for confirming whether to set the Self mode appears.
2 Enter the Security code and press 3 Select [ON] and press (OK). . The Personal data lock is set and “ ” appears. To cancel the Personal data lock Select [OFF]. The Personal data lock is canceled and “ Security Settings 138 ” disappears. ● When the Personal data lock and Key dial lock are set simultaneously, “ ” is displayed instead of “ ”.
Restricting Dialing from the Keypad The keypad is locked to restrict placing a voice or videophone call or originating a PushTalk call. To cancel the Key dial lock temporarily, enter the Security code. 1 From press the Menu, select [Settings] → [Lock/Security] → [Key dial lock] and . Security Settings ˎ When you set the Key dial lock, you cannot perform the following functions.
Locking the Keypad to Prevent an Accidental Use While carrying around the FOMA terminal that is powered on, the keypad can be locked to prevent from pressing the keypad accidentally. ˎ The following operations are available while the Lock key is set.
Setting the Lock Key by Opening/Closing the FOMA Terminal You can set to lock the keypad by closing the FOMA terminal and cancel the lock by opening it. 1 From the Menu, select [Settings] → [Management] → [Slide setting] → [Slide lock] and press . 2 Select [ON]/[OFF] and press . The Slide lock is set. Setting the Display of the Redial/Received Record 1 Press ( ) in the stand-by display and press (Func). The Function menu appears.
Protecting Mail from Unauthorized Access You can set the FOMA terminal not to display the received/sent/saved mail by folder. You can also use this function not to display the Receive/Send ranking and Sort inbox/outbox. To cancel this function temporarily, enter the Security code. 1 From the Mail menu, select [Inbox]/[Outbox]/[Draft] and press 2 Press . (Func). The Function menu appears. 3 Select [Mail security] and press . The Security code screen appears.
5 Select a folder to be locked and press . To lock all folders Press (Sel. all). To unlock the selected folder Press (Rel.). 6 Press (Complete). The screen for confirming the change of the security setting appears. 7 Select [Yes] and press . The Data security is set. Specifying Phone Numbers to Accept/Reject Calls Security Settings You can set to accept/reject voice, videophone, or PushTalk calls only from specific phone numbers.
4 Select [Phone No.] and press . To specify a group Select [Group list] and select a group at the group field. To delete a phone number or group Move the cursor to the number or group field and from the Function menu, select [Delete] → [Delete one] → [Yes]. To delete all numbers or groups, from the Function menu, select [Delete] → [Delete all] → [Yes]. Ｐｈｏｎｅ Ｎｏ． ｌｉｓｔ Number field 5 Enter a phone number at the number field. 6 Press .
Muting the Ring Tone for Calls with No Phonebook Entry You can set a time interval before starting operation of the ring tone, incoming indicator, and vibrator when you receive a voice, videophone, or PushTalk call from a person/group who is not saved in the Phonebook. This function is also useful for blocking a nuisance call such as from a malicious caller. ˎ When the Reject unknown is set, you cannot set the Set ring start time.
Rejecting Calls from Callers with No Phonebook Entry You can set to reject voice, videophone, or PushTalk calls from callers not saved in the Phonebook. It is recommended that you set the Caller ID Display Request Service together with this function. ˎ SMS and i-mode mail can be received regardless of this function. ˎ If you receive a call from a caller who is not saved in the Phonebook when the Reject unknown is [ON], the call is not connected.
Using the Data Security Service The Data Security Service is a service that allows you to store the Phonebook, images, and mail (hereinafter referred to as “stored data”) saved in your FOMA terminal at the Data Security Service Center. Even if you lose the stored data, for example, if you accidentally lost the FOMA terminal or it had a water-related trouble, you can restore the stored data at the Center into a new FOMA terminal.
Other Measures “For Safety Operation” The following functions and services are also available for safety operation besides those described in this chapter. Purpose Prevent others from using the IC card function without consent. Do not receive a “nuisance call” such as a prank call and malicious sales call. Do not receive a call without a caller ID. Function name/Service name IC card lock Security Settings Nuisance Call Blocking P.390 Service Caller ID Display Request P.
Camera About the Copyright Objects, such as movies, still images, and sounds, recorded using the FOMA terminal and productions on a site (program) or Internet site are prohibited by the copyright law from reproduction, transformation, and compilation without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law. Also, using or transformation of other person’s portrait or name without his or her permission may violate the right of portrait.
Before Using the Camera You can record images by the FOMA terminal’s built-in camera, which you can send by attaching to i-mode mail, posting on a blog, setting for the stand-by display, and so on. Also, when you save a recorded image into the microSD memory card, a reduced image can be saved in the FOMA terminal at the same time (P.174, 315). To use the microSD memory card, you need to obtain a microSD memory card separately.
About Still Image/Movie Item File format File name Movie MP4 (MobileMP4) When saved to [Data Box] YYYYMMDDhhmmss ˎ The recorded year, month, date, hour, minute, second is displayed. For example, when a movie is recorded at February 1, 2008, 18:02:10, it appears as “20080201180210”. When saved to [microSD] MOLnnn Camera File number Still image JPEG (Exif format) When saved to [Data Box] YYYYMMDDhhmmss ˎ T h e r e c o r d e d y e a r, m o n t h , d a t e , h o u r, m i n u t e , s e c o n d i s displayed.
About Recording Time of Movie The recording time of movie that can be saved in the Data Box or microSD memory card varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting.
■ Estimated recording time of movie you can record and save in the microSD memory card (64MB) (m: minute, s: second) File size Image size restriction Shoot mode Total recording time available Image quality Super fine Fine Standard Economy About 663m − − − − − − − − About 21m − − − About 21m − − − About 43m About 67m About 168m About 366m About 41m About 61m About 148m About 283m About 133m About 283m About 467m − About 111m About 229m About 338m − About 622m About 420s − − − About 420s − − − About 21m − −
Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected. to switch the display of the icons and guide display (Standard, Key operation ˎ You can use guide display, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations. When recording a movie ͯ ͵ Ͷ ͷ Ͳ ͺ ͻͼ Camera ; Ϳ ͳ ͦ Shoot mode (P.178) ˎ “ ” appears when recording a still image. ͧ Flash (P.
Recording Still Images When recording with the Out-camera, you can use the Auto Focus function to focus on an object at the center of the display and record still images. When the Auto orientation is set to [ON], the orientation of the FOMA terminal is automatically recognized and record an image while recording.
4 Press (Save). Camera The still image is saved. To attach to mail Press (Func) for over a second. The still image is saved and the Edit mail display appears. You can also attach an image to mail by selecting [ ] (Attach to mail) from the Function menu. To cancel a recorded image Press and select [Yes]. To display a saved image Press in the Camera mode display. To add location information From the Function menu, select [ ] (Location info) → [ ] (Rcv loc. Info).
Using the Basic Functions of the Camera Graphical Menu You can set the camera basically using the Graphical menu. In this manual, the icons of the operations selected from the Graphical menu are ones set at the time of purchase. ˎ Because the icons of the Graphical menu depend on the settings at the time, the displayed icons on the Graphical menu may differ from this manual. 1 Press (Func) in the Camera mode display.
2 Press until the time you want to show or [OFF]. The Auto timer is set. ● The list of the Direct key and functions assigned to the Direct key can be checked by pressing or on the Key operation guide display appeared when slide the FOMA terminal to open. Selecting an Image Size You can select the size of a still image and movie to be recorded from nine and four types, respectively.
Switching the Camera Used for Recording You can switch between the Out- and In-cameras for recording. ˎ When the Shoot mode of the still image is set to [Best Pic™], [Continuous mode], [High sensitivity], or [Panorama], you cannot switch the camera. ˎ When the Shoot mode of the still image is set to [Shoot with frame] while the image size is set to [Stby(480×864)], you cannot switch the camera from the Out-camera to In-camera.
Adjusting Zoom You can adjust the zoom of an image while recording with the Out-camera. Up to about 3x optical zoom can be used. When the zoom magnification is exceeded, you can record an image using the digital zoom. Moreover, the Smart zoom function does not degrade the quality of the image while recording even if the maximum magnification of the optical zoom is exceeded.
1 Press (Zoom(W))/ (Zoom(T)) in the Camera mode display. (Zoom(W)) to increase the zoom and (Zoom(T)) ˎ Press to decrease it. When you press these keys for over a second, an image is zoomed in/out continuously. The zoom is adjusted and the current magnification is indicated on the zoom bar. ˎ If “■” on the bar moves to the blue zone, the image quality is deteriorated. ● When the Auto Focus is set to [Macro mode], the optical zoom can be adjusted in 7 levels from 1.1x to 2.6x.
Enjoying Various Recording Methods Recording a Still Image Using the BestPic™ Mode Just by bringing an object into focus using the Auto Focus function and pressing the shutter, you can record a total of nine continuous still images in a moment before and after you press the shutter, from which you can select the best shot. Camera ˎ The image size of BestPic™ is [VGA(640×480)], [Stby(480×864)], [1M(1280×960)], [2M(1632 ×1224)], [2M Wide(1920×1080)], [3M(2048×1536)], or [5M(2592×1944)].
Recording Still Images in the Continuous Mode You can record four still images continuously at an interval of about 0.2 seconds with a single press of (Shoot) or . ˎ The image size in the Continuous mode is [VGA(640×480)]. You cannot change the image size. ˎ When you set the Shoot mode to [Continuous mode] while the Select scene is set to [Night scene] or [Low Light], the Select scene is changed to [AUTO].
2 Select a frame size and press . The Frame display appears. 3 Select a frame and press . To check a frame Move the cursor to a frame and press 4 Press (Play). (Close). The Shoot mode is set to [Shoot with frame] and “ 5 Point the camera at the object and press ” and the selected frame appear. halfway. The white-framed focusing window is used to adjust the focus. When the image comes into focus, the confirmation sound is heard, and the focusing window turns green. 6 Press .
Recording a Panoramic Image After you press the shutter, keep the camera in a horizontal position and move it to record images serially, and connect to each other and save as a single image. You can also record a panoramic image with a 360-degree field of view. ˎ The Auto timer cannot be set. ˎ When the Shoot mode is set to [Panorama], the Picture effect is changed to [OFF]. Also, temporarily, the Flash is set to [OFF], and the Auto Focus and Face detection are set to [OFF].
Enjoying Decorating Images Stylishly Using the Deco-Snap Mode Using frames and stamps allows you to decorate images nicely. ˎ For Out-camera recording, you can select an image size of [QCIF(144×176)], [QVGA(240× 320)], [VGA(480×640)], and [Stby(480×864)]. For In-camera recording, you can select the image size of [QCIF(144×176)] and [QVGA(240×320)]. ˎ When the Shoot mode is set to [Deco-Snap], the following items are changed temporarily.
To paste an image stamp Select [ ] → a stamp, adjust the position to be pasted, press (Paste), and then (OK). press To paste text Select [ ], compose a text stamp, adjust the position to be pasted, press (Paste), (OK). and then press ˎ To compose a text stamp, see “Pasting Text” (P.289, step 2 to 3). To undo all editing Select [ ]. To post on a blog Select [ ] (Save) → [ ] (easy BlogUp) (P.355). Recording Movies You can record a movie with the camera.
● When there is not enough memory or the number of recorded time of saved movies exceeds the maximum number, the message appears. Change the place to save the movie or delete unnecessary movies. Even if recording is possible, the maximum recording time may not be achieved. ● When you switch to movie recording from still image recording, the following items are reset.
3 Select [Multi AF]/[Spot AF] and press . The Multi focus is set and the icon for the current Multi focus type appears. Multi AF Spot AF Setting the Effective Distance of the Auto Focus You can set the effective distance of the Auto Focus function when you record still images with the Out-camera. 1 Press (Func) in the Camera mode display, select [ 2 Select [Shoot] → [Auto Focus] and press ], and press . . 3 Select the Auto Focus type and press Camera in the Camera mode display.
Turning on the Photo Light The FOMA terminal’s built-in photo light can be used when recording with the Outcamera in a dark place, etc. 1 Press in the Camera mode display. Every time you press , the photo light is switched to [ON]/[OFF]. When switched to [ON], the photo light is turned on and “ ” appears. ● The photo light is for helping you record in a dark place. You cannot expect as much amount of light from the photo light as from the electric flash of a normal camera.
Setting Movies to Play Back on Another FOMA Terminal You can set recorded movies to play back on another FOMA terminal. ˎ When the Common replay mode is set to either [High quality] or [Long play], the settings of the camera are changed, as follows.
3 Select a white balance type and press . The White balance is set and the icon for the current white balance type appears. ˎ No icon appears for [AUTO]. Fine Cloudy Fluorescent Bulb Setting a Position for Automatic Adjustment of the Exposure You can set what position on the screen to use as a reference for the image brightness (EV) adjustment. 1 Press (Func) in the Camera mode display, select [ 2 Select [Adjust] → [Photometry] and press ], and press . . Camera in the Camera mode display.
Restoring the Default Camera Settings You can reset the camera settings to the default settings. The camera settings listed below can be reset. Item Select scene EV Photometry 1 Press Default setting AUTO ±0.0EV Center Item Zoom magnification White balance Picture effect (Func) in the Camera mode display, select [ 2 Select [Adjust] → [Reset all] and press Default setting ×1 AUTO OFF ], and press . .
Setting Whether Recorded Images Are Automatically Saved You can set the save method of an image recorded. 1 Press (Func) in the Camera mode display, select [ 2 Select [Set] → [Auto save] and press ], and press . . The menu for selecting whether to automatically save the recorded images appears. [ON] : After recording, the image is automatically saved. [OFF] : After recording, press (Save) on the screen for confirming whether to save the image if you want to save it. 3 Select [ON]/[OFF] and press .
Movie [Super fine] : Higher image quality mode. The file size is larger and the recording time is shortest. [Fine] : Image quality mode for smoother movement in movies. [Standard] : Standard image quality mode. [Economy] : Lowest image quality mode. The file size is smaller and the recording time is longest. 3 Select the image quality and press . The image quality is set and the icon for the current image quality appears.
Changing the Shutter Sound The shutter sound can be selected from three types when the Shoot mode for still images is [Regular], [Best Pic™], [Shoot with frame], [High sensitivity] or, [Panorama]. ˎ The shutter sound volume is fixed and cannot be adjusted or muted. The shutter sound is heard even if the Manner mode is set. ˎ When the Shoot mode is set to [Deco-Snap], the current shutter sound is heard when recording. You cannot set the shutter sound.
Setting Whether to Add Location Information to an Image When Saving You can add location information automatically to a recorded still image using the GPS function. 1 Press (Func) in the Camera mode display, select [ 2 Select [Set] → [Set attach loc. info] and press Ｓｅｔ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ Ａｕｔｏ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ ＯＮ Ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ ｍｅｔｈ． Ｆｒｏｍ ａｃｔ． ｃａｍｅｒａ Ｌｏｃａｔｉｏｎ ｉｎｆｏ ], and press . . [Auto attach loc. info] : Select whether to add location information automatically when saving an image. [Attach loc.
1 Press (Func) in the Camera mode display, select [ 2 Select [Set] → [Reset file No] and press ], and press . . The screen for confirming whether to perform the Reset file No. appears. 3 Select [Yes] and press . The file numbers are reset. Restricting the Size of a File Used for Movie Recording You can restrict the size of a movie file to a file size that can be attached to i-mode mail. 1 Press [ (Func) in the Camera mode display, select [ ] (Movie shoot), and press .
4 Select a shoot mode and press . The Shoot mode is set and the icon for the current shoot mode appears. Image+Sound Image only Sound only Using the Bar Code Reader You can use the Out-camera to scan JAN or QR code. The scanned text data can be used for Phone To (AV Phone To), Mail To, Web To and i-αppli To functions, Bookmark and Phonebook entries, and also for displaying and copying/pasting text. You can also obtain a ToruCa card, and play and save the scanned images and melodies.
2 Locate the JAN/QR code at the center of the display and press Ｓｃａｎｎｉｎｇ Ｆｉｘ ｃａｍｅｒａ 3 Press (Scan). The scanning of the JAN/QR code starts. When the scanning is completed, the end sound is heard and the data that has been scanned is displayed in the normal display. To save scanned data such as a phone number Move the cursor to data such as a phone number and from the Function menu, select [Add to phonebook] → [Yes] and save the scanned data in the Phonebook.
i-mode/i-motion/ i-Channel ※ i-mode is a paid service that requires a subscription. What is i-mode? ....................................................................................................... 182 Displaying the i-mode Menu .............................................................. 182 ■ Displaying a Site Displaying Sites ....................................................................................................... 183 Using Sites .......................................
What is i-mode? i-mode allows you to use the i-mode compatible FOMA terminal (hereinafter referred to as i-mode terminal) to access various online services such as site (program) connection, Internet connection, and i-mode mail. Displaying the i-mode Menu 1 Press (i-mode) in the stand-by display. ˎ i-mode is a paid service that requires a subscription. ˎ For details on i-mode, see the “Mobile Phone User’s Guide【i-mode】FOMA version”.
Reconnecting to the Web Page Displayed Last Displaying Sites Various sites offered by IP (information service providers) can be displayed (the subscription is necessary for some sites). 1 From the i-mode menu, select [i Menu] → [メニュー/検索] (Menu/Search) and press . The site displayed when you last connected to i-mode is recorded as the Last accessed URL. You can directly connect to this site from the Last accessed URL. ˎ Some web pages cannot be recorded as Last accessed URL.
● The confirmation message may appear when the connected site may not be secure. Select [Yes] to connect to the SSL site, or select [No] to cancel connecting to the SSL site. ● If there are any problems such as an invalid certificate of the server, the SSL site may not be displayed. Using Sites Selecting Links or Other Items of Choice When using a site, you may display a linked site, enter texts (textbox) or select an item from multiple options (radio button, check box, and pull-down menu).
Displaying a Site URL The URL of the currently displayed site can be displayed. 1 While displaying a site, press (Func). The Function menu appears. 2 Select [URL] and press ● The page may not be displayed correctly even if the character code is changed. Note that changing the character code when the page is displayed correctly may cause the page to be displayed incorrectly. Changing the Display to Full Browser . The URL of the site is displayed. To copy the URL Press (Copy).
● If an error occurs during a Flash movie playback, this Flash movie cannot be saved. ● Some of the Flash movies vibrate the FOMA terminal during playback. Note that this could happen even if the vibrator is set to [OFF]. ● Some Flash movies may have to use data saved in the i-mode terminal. To allow such a Flash movie to use saved data, set the Use phone info of the i-mode setting to [Yes] (P.194). This item is set to [Yes] at the time of purchase.
Displaying Internet Sites 2 3 From the i-mode menu, select [Go to location] → [Enter URL] and press . The Enter URL display appears. ˎ When the URL has been entered before, the URL entered previously is displayed. ˎ The beginning of the URL “http://” is entered beforehand. 2 Press (Edit) and enter the URL. Enter the URL including “http://” within 256 halfwidth alphanumeric characters and symbols. Press (Cnct). The FOMA terminal is connected to the site.
Displaying a Site Adding/Deleting Folders A site can be displayed using a bookmark. 1 From the i-mode menu, select [Bookmark] and press . A list of bookmark folders appears. ˎ The following icons show the type of folder. (Yellow) Preset folder (Blue) User-created folder 2 Select a folder and press Select a bookmark and press ˎ You cannot delete the preset folders. Example: Adding a folder 1 . From the i-mode menu, select [Bookmark] and press , then press (Func). The Function menu appears.
3 Select [Move] → [Move one] → [Yes] and press . 1 The Select move to display appears. 4 Select a folder and press Saving a Screen Memo The selected bookmark is moved to the different folder. 2 You can delete bookmarks using four methods. Example: Deleting a bookmark From the i-mode menu, select [Bookmark] and press . To delete all bookmarks From the Function menu, select [Delete all], enter the Security code, and select [Yes]. 2 Select a folder and press . Select a bookmark and press (Func).
Protecting a Screen Memo You can protect screen memos from being overwritten. You can protect up to 50 screen memos. 1 Select a screen memo from the screen memo list and press (Func). Example: Saving a graphic displayed in a site 1 2 3 Deleting a Screen Memo i-mode/i-motion/i-Channel You can delete screen memos using three methods. 1 From the i-mode menu, select [Screen Memo] and press .
Downloading Data from Sites You can download melodies, PDF data, Charaden, ToruCa cards, Deco-mail templates, dictionaries, Kisekae Tool, mail (vMessage format), and easy BlogUp service information file from related sites.
● Downloaded melodies may not be played back properly. ● PDF data whose size is unknown is downloaded until the downloaded size of it reaches 2M bytes. ● You may be able to display the PDF data you failed to download by downloading it again. However, some PDF data may be disabled for display. ● If you have deleted preinstalled Chara-den files or PDF data, you can download them from “PlayNow by SO”.
Setting i-mode 1 Setting the Connection Timeout Ｈｏｓｔ ｓｅｌｅｃｔｉｏｎ ｉ−ｍｏｄｅ（ＵＩＭ） The duration before disconnecting the FOMA terminal automatically can be set when you cannot send or receive data due to heavy traffic at the i-mode center. 1 2 3 (Create). Enter the Security code and press (OK). Ｈｏｓｔ ｓｅｔｔｉｎｇ Ｈｏｓｔ ｎａｍｅ Ｈｏｓｔ ｎｕｍｂｅｒ Ｈｏｓｔ ａｄｄｒｅｓｓ The Connection timeout is set.
Setting Whether to Use the Saved Data for Flash Movies You can set whether to use the saved data (P.185) when you play back a Flash movie displayed on a site or saved in the Screen Memo. 1 2 Operating the SSL List You can set to validate/invalidate the certificate that is required to connect to an SSL site. 1 From the i-mode menu, select [i-mode setting] → [Use phone info] and press . Select [Yes]/[No] and press ＳＳＬ ｌｉｓｔ .
Setting the FirstPass 4 1 From the i-mode menu, select [i-mode setting] → [User certificate] and press . ＦｉｒｓｔＰａｓｓ ・ＦｉｒｓｔＰａｓｓをご利用いた だくためには、ユーサ゛証明書 の発行申請、タ゛ウンロート゛が必 要です。 ・「次へ」を選択して、ユーサ゛ 証明書の発行申請、タ゛ウンロー ト゛を行ってください。 ・当サイトの閲覧／ご利用にあ たってのハ゜ケット通信料は無 料です。 次へ／Ｅｎｇｌｉｓｈ 2 Select [English] and press . ＦｉｒｓｔＰａｓｓ Ｒｅｑｕｅｓｔ ｙｏｕｒ ｃｅｒｔｉｆｉｃａ ｔｅ Ｄｏｗｎｌｏａｄ ｙｏｕｒ ｃｅｒｔｉｆｉｃ ａｔｅ Ｏｔｈｅｒ ｓｅｔｔｉｎｇｓ Ｔｈｅ ｕｓａｇｅ ｒｅｇｕｌａｔｉｏｎ （ Ｊａｐａｎｅｓｅ ｏｎｌｙ） 3 Select [Request your cer tificate] → [Continue] and press . The PIN2 code input screen appears.
Changing the Host for Certificate Issue
Downloading an i-motion from Sites You can download i-motion from a site and save it to the FOMA terminal. ˎ You can save up to 150 i-motion, each up to 10M bytes. The number of i-motion that can be saved may decrease depending on the data to be saved. 1 While displaying a site, select an i-motion and press . ｉ−ｍｏｔｉｏｎ Ｐｌａｙ Ｓａｖｅ Ｆｉｌｅ ｐｒｏｐｅｒｔｙ Ｂａｃｋ 2 Select [Save]/[Save temporary] and press . The screen for selecting where to save appears.
What is i-Channel? i-mode/i-motion/i-Channel The i-Channel service provided by DoCoMo or another IP (information service providers) distributes news, weather, etc. as graphicsbased information to i-Channel-compatible terminals. You can run the latest information updates in the stand-by display as Telop text by automatically getting this information on a regular basis. You can also display a list of channels and view the channel you want by pressing (P.198).
