General Inquiries ＜DOCOMO Information Center＞ Repairs (In English) (In Japanese only) 113 (toll free) Easy Search/Contents/Precautions *Can only be called from DOCOMO mobile phones. Before Using the Handset 0120-005-250 (toll free) (No prefix) *Can be called from mobile phones and PHSs. (In Japanese only) (No prefix) (In Japanese only) 151 (toll free) Voice/Videophone Calls 0120-800-000 (toll free) *Can be called from mobile phones and PHSs. *Can only be called from DOCOMO mobile phones.
DOCOMO W-CDMA and GSM/GPRS Systems Thank you for choosing FOMA SO706i. Read this manual carefully before use or during operation as well as separate manuals for other components, and use FOMA SO706i properly. If you have further questions regarding manuals, contact the inquiries number provided on the back of this manual. FOMA SO706i is your useful companion. Take good care of it for so long a period.
How to Refer to This Manual In this manual, following methods are available to find the descriptions of functions and services. Index p.396 You can find keywords and functions displayed on the display of the FOMA terminal. Easy Search p.4 You can find often-used functions and convenient functions in simple terms. Index on the front cover See the next page for details. Cover You can find the table of contents for each chapter by using the Index on the front cover. Contents p.
How to Refer to This Manual (continued) Following example shows how to look up the alarm function using “Index”, “Easy Search” and “Index on the front cover”. p.396 Index You can find keywords and functions displayed on the display of the FOMA terminal. Alphabetical/Numerical/Kana KA Signal quality . . . . . . . . . . . . . . . 85 Auto Decomail-picture (download) . . 146 Alarm notification actions . . 290, 295 Alarm setting . . . . . . . . . . . . . . . . 289 Auto power ON/OFF . . . . . . . . . . .
This manual uses illustrations and marks to explain how to operate the function so that you can use the FOMA terminal correctly. Describes the function name. Using the Alarm Function Describes the operation on each step. Describes the screen at the time of the operation. Compare it with the screen when you operate. “LIFEKIT” “Alarm” 1i The “Alarm list” screen appears. ■ To switch ON/OFF with the last settings Highlight the setting item p (ON/OFF) “ON/OFF” switches each time you press p.
Easy Search Find out a function with easy words from the Easy Search index below. Easy Search/Contents/Precautions Useful functions for talking ・Show/Hide your caller ID p.46 Caller ID Notification ・Switch voice/videophone call during call p.50 ・Adjust the volume during a call p.61 ・Hold the current call p.62 Volume Holding When you cannot answer incoming call ・Hold the ringing call without answering p.62 On hold ・Notify that you cannot answer the call p.62 p.
Master mail ・Send Deco-mail® p.158 Deco-mail® ・Send image or melody p.160 Attach file Easy Search/Contents/Precautions ・Sort and save mail automatically p.174 Auto-sort Master camera ・Change the size of image to shoot p.122 ・Display the shot p.225 My picture ・Save image on the microSD card p.249 Use your phone without worries ・Lock the FOMA terminal remotely when lost p.101 Omakase Lock*1 ・Prevent others from viewing the phonebook p.
Easy Search/Contents/Precautions Contents Before Using the Handset p.23 Voice/Videophone Calls p.47 Phonebook p.69 Sound/Screen/Light Settings p.81 Security Settings p.99 How to Refer to This Manual ..................................................1 Easy Search ...........................................................................4 Contents .................................................................................6 Feature Preview of the FOMA SO706i ...................................
Osaifu-Keitai/ ToruCa aWhat is Osaifu-Keitai? aWhat is iC transfer service? aUsing Osaifu-Keitai aWhat is ToruCa? aAcquiring ToruCa aViewing ToruCa aIC card lock, etc. p.201 p.207 Full Browser p.217 aWhat is 1seg? aChannel setting aViewing 1seg aData broadcasting aBooking program/Timer recording a1seg settings, etc. aDisplaying website designed for PC aFull Browser settings, etc. p.
Feature Preview of the FOMA SO706i FOMA is the name of DOCOMO’s service based on the W-CDMA system approved as one of the global standards for third-generation mobile telecommunication systems (IMT-2000). Easy Search/Contents/Precautions i-mode i-mode is an online service that you can use to send e-mail as well as using the useful information from the i-mode menu site (program) and i-mode compatible website. Features of SO706i ■ i-mode mail/Deco-mail®/Deco-mail® pictograph → pp.
Wide variety of functions ■ Colorful illuminations → p.92 ■ Wide scale display The approximately 2.8-inch high-resolution display is adopted. This recreates the still images or videos in bright and vivid colors. ■ Style-Up® panel ■ Camera Style-Up® panel is adopted. You can enjoy changing the optional panel to your moods. Also, it is available to download panel-fit Kisekae Tool from “PlayNow” by SO. Use the camera with the effective pixels 2 million (maximum recorded pixels 1.
Mastering the FOMA SO706i! Send and receive real-time movie while talking Easy Search/Contents/Precautions Videophone→ p.49 You can talk to the other party seeing images. Image at the other side Your FOMA terminal is set to emit other party's voice through the speaker by default so that you can start talking immediately Image at your side when making or answering a call. Furthermore, you can change the call mode from voice to videophone without having to end the call.
Use 2 phone numbers and e-mail addresses for your FOMA terminal 2in1 →p.320 * Subscription is required (Charged). A mode B mode Phone number: 090-AAAA-AAAA Mail address: xxA@docomo.ne.jp Phonebook: For A mode Phone number: 090-BBBB-BBBB Mail address: xxB@docomo.ne.jp Phonebook: For B mode Make a call/send a mail in A mode Easy Search/Contents/Precautions You can separately use 2 phone numbers and 2 mail addresses on your FOMA terminal as if you have 2 terminals.
Precautions (ALWAYS FOLLOW THESE DIRECTIONS) Easy Search/Contents/Precautions ■ To ensure that you use your FOMA terminal correctly, read the Precautions carefully before use. Keep this manual after reading for future reference. ■ The precautions must be observed at all times since they contain the information intended to prevent the bodily injuries or the damage to the property.
CAUTION Use the battery pack and adapter (including the charger) specified by NTT DOCOMO for the FOMA terminal. Do Don’t Keep the FOMA terminal away from the humid, dusty or hot places. This may cause malfunction. Don’t Do Don’t This may cause the battery pack to leak, overheat, explode or ignite, cause the FOMA terminal or adapter (including the charger) to overheat, smoke or ignite, or damage the IC. Keep the FOMA terminal out of young children’s reach.
Don’t Easy Search/Contents/Precautions Do Do not put fluids such as water or objects such as pieces of metal or flammable materials into the FOMA card inserting slots or microSD card slots inside of the FOMA terminal. If the display or camera lens is broken, be careful of the broken glass and the inside of exposed FOMA terminal. Do Such actions could cause fire, electric shock or malfunction.
Do In some types of vehicle, using the FOMA terminal in the vehicle may interfere with the operation of the vehicle’s electronic equipment. Don’t Do not use the FOMA terminal if the terminal may impair the safe driving. Metal components are used for the following parts.
Do not charge the wet battery pack. Do not touch the power cords of the adapter (including charger) or the power outlet with wet hands. This causes the battery pack to overheat, ignite, or explode. No wet hands This may cause an electric shock. Don’t Easy Search/Contents/Precautions Do If battery fluid comes into contact with your skin or clothing, stop using the FOMA terminal immediately and rinse it off with clean water. Use the specified power supply and voltage.
5. Handling the FOMA card CAUTION Do This may injure your hands or fingers. Do ■ The following precautions conform to the guidelines drawn up during the Electromagnetic Compatibility Conference Japan, regarding how to protect electronic medical equipment from radio waves emitted by mobile phones.
Handling with Care General Notes c Do not water the devices. Easy Search/Contents/Precautions The FOMA terminal, battery pack, adapter (including the charger) and the FOMA card (UIM) are not water-proof. Do not use them in humid locations such as bathrooms, and avoid exposing them to rain. If you carry your FOMA terminal close to your skin, sweat may cause internal components to corrode and result in a malfunction.
The performance and life of the battery pack may be deteriorated. Handling the Adapter (including the Charger) c Charge the battery pack within the proper ambient temperature range (5°C to 35°C). c Do not charge the battery pack in the following places: aIn a humid, dusty or shaky place aNear your home phone, TV or radio c It is normal for the adapter or charger to become warm while being charged. It is not a malfunction and you can keep on using.
Intellectual Property Right Copyright and Portrait Right Easy Search/Contents/Precautions It is prohibited to duplicate, modify or publicly transmit content such as text, images, music or software that was photographed using the FOMA terminal or downloaded from Internet website and that is subject to third-party copyright without the permission of the copyright folder, except where the duplication or quoting of the content for personal use is permitted under copyright law.
aContent owners protect copyrighted intellectual properties by WMDRM (Windows Media digital rights management) technology. This product uses the WMDRM software to access WMDRMprotected contents. If the WMDRM software is unable to protect contents, the content owners request Microsoft to disable the WMDRM function of the software for playing or copying protected contents. No contents other than protected ones are affected by disabling the function.
Package Contents Easy Search/Contents/Precautions FOMA SO706i (Including the warranty and Back Cover SO12) Manual for FOMA SO706i (This manual) * The Quick Manual starts on p.408. CD-ROM for FOMA SO706i Battery Pack SO03 * This CD-ROM contains the PDF files of “Manual for PC Connection” and “Kuten Code List”. FOMA AC Adapter 01/02 (Including warranty and manual) Other options and accessories→ p.
Before Using the Handset Component Names and Functions ................................................................................. Display ............................................................................................................................ Menu Selection ............................................................................................................... Changing the Main Menu.............................................................................................
Component Names and Functions 1 w 2 Before Using the Handset q 3 e & * 4 6 7 9 ( @ ) 5 8 0 ! * r y u # $ % t ^ * : The Antenna of the FOMA terminal is built-in. ■ Functions 1 Infrared data port → p.257 2 Earpiece 3 Display 4 u Function key 1 • Performs the function displayed (principally the FUNC menu) → p.32 • Displays the mail menu 5 o Function key 2 • • • • 24 Performs the displayed function → p.32 Displays the i-mode menu Makes videophone calls → p.
d ( microSD card slot • Performs the function displayed (“Select” or “Set”, mainly) → p.32 ) External connecter 7 i Function key 3 • Performs the function displayed→ p.32 • Displays the main menu/Simple Menu → pp.29, 33 • Displays the task change screen → p.283 • Performs the function displayed→ p.
Functions that involve holding down keys for 1 second or longer The functions available by holding down each key for 1 second or longer in the standby screen are as follows: Before Using the Handset 26 Key Function Ref. page Key h Displays the Received address list. p.177 c Adjusts the earpiece volume. p.61 a (▲マナー) Sets/Releases Manner mode. p.86 j Displays the Sent address list. p.177 2 Switches the Shield view. p.90 5 Turns the display light on/off. p.
Display z The symbols (such as , , , etc.) displayed on the screen are referred to as icons. z A calendar, etc. can be set to the display. → p.89 The status of the FOMA terminal is indicated with icons in this area → p.27 Before Using the Handset Clock display→ p.93 Shortcut icon display area ・ etc. : Advising shortcut icons→p.94 ・ etc. : Pasted shortcut icons →p.94 (1Seg), (Photo mode) and default settings. (My selection) are the Task icon display area ・ etc.
Icon 5 6 / / / / Description Unread message R and F (in red when each of them is full) →p.179 Mail kept at the i-mode Center/Full →p.164 (Red) Icon ! microSD being accessed → p.247 @ During a voice call → p.48 Before Using the Handset “Receive option setting” is set to “ON” and a mail is kept at the i-mode Center→p.164 / / MessageF kept at the i-mode Center/Full→p.179 (Red) 7 Dial lock →p.101 Secret mode/Secret data only mode→ p.103 / Original lock/Original lock released temporarily→pp.
Menu Selection You can run, set, and check the FOMA terminal’s functions in a variety of ways. There are various methods of the rest though the method of selecting the function from the main menu is general. You can select the functions of the FOMA terminal from the main menu displayed by pressing i in the standby screen. The menus are sorted by function.→ p.
Accessing functions with the function keys On each screen, you can access functions easily by pressing the function keys pre-assigned to the function. 1 Press the function key on the standby screen Before Using the Handset Pressing f displays the Choku-Den screen.→ p.78 Pressing u displays the mail menu.→ p.156 Pressing o displays the i-mode menu. →p.136 Pressing p displays the Channel list.→ p.153 Pressing g displays the phonebook list screen.→ p.73 Pressing h displays the Received calls screen.
Searching menu items to access functions Even if you do not know the procedure to access the menu, you can still access the desired function by entering key words to search menu items. Press i on the standby screen, then press u (FUNC), and highlight “Search”, then press d (Select) 2 d u i Before Using the Handset 1 Enter “ring” and press d (Set), then select the displayed menu p d The search result is displayed with an underline.
Accessing functions by selecting menu numbers When the main menu is set to “Standard Menu” (p.33), you can access functions quickly by pressing the keys pre-assigned to the menu numbers (p.340). Before Using the Handset 1 Press i on the standby screen, then press 13 in sequence 1 i 3 How to use the function keys The operation icons (Function display) corresponding to u, d, o, i, p and the direction icons corresponding to b are displayed on the screen.
Changing the Main Menu You can change the design of the main menu (style for background or icon, etc.) as you want. 1 Press i on the standby screen, then press o (Change) in sequence Switching pages →p.34 i o Main Menu 2 Theme Select an item “Lacy Pink” to “Standard Menu” Switches the display design in each menu. When set to “Standard Menu”, you can access functions by entering the menu numbers.→ p.32 Large Menu Large-font menu appears.
The Basic Operations on the Screens ● When items appear in multiple pages Before Using the Handset 1 Press v to display other pages To switch the page, press h (or a ( ▲マナー)) for the previous page and press j (or s ( ▼メモ )) for the next page. Current page/Total pages j h ■ To display other pages using c Pressing f displays the previous page when the highlight is located at the top of the list, and pressing g displays the next page when the highlight is located at the bottom of the list.
● To display images in 9 images display 1 Press b to move the frame, then press d (Disp.) Ｃａｍｅｒａ １／２ Before Using the Handset ２００８／０８／０１ ０６：３５ ● Entering a security code 1 Enter the 4 to 8 digit security code, then press d (Set) The numbers of the entered security code is displayed as “_”. The detail screen of the function is displayed when the security code is successfully entered. ■ If the entered security code is incorrect A message notifying that the security code is wrong is displayed.
Description of the Operations In this manual, instructions for menu operations are briefly described in almost all cases as follows: The example of description of operations and the actual operations Before Using the Handset ① 1 ② ③ ④ ⑤ i “LIFEKIT” “Alarm” Highlight the item to set u (FUNC) ① : Press i on the standby screen. ② : Press b to move the highlight to the menu in the double quotation mark, then press d (Select).
Function Menu “Function Menu” is one of the menus of the FOMA terminal that can be accessed from the function display. The function menu activates supplementary functions of each screen. For example, you can use the function menu to delete a mail after reading it, or to select the folder to save an image you shot with the camera. There are mainly three ways to use the function menus. Use the appropriate method depending on the situation.
● About multiple-choice When you delete unnecessary data, protect important data or move the data you do not want to be viewed by others to the secret folder, etc., you can select not only one data or all data but also multiple data. In this case, perform the following operation.
Setting the FOMA Card ● Attaching/Removing the FOMA card The illustration shows how to attach the FOMA card. the FOMA card into the card inserting 1 Put slot with the IC side downward as shown in the illustration Cut corner IC FOMA card (UIM) FOMA card inserting slot Gold colored IC side down the FOMA card until it is fixed 2 Insert To remove the FOMA card, carefully pull it out straight from the following status.
z Functions that are set to “Invalid” • Cookie settings for Full Browser (Cookie information is kept) z Functions of which current settings of the FOMA card (UIM) become invalid • Program setting of the Music&Video Channel (Set the program again) Before Using the Handset When the inserted FOMA card (UIM) was used to download data or receive mails, you can view or play the data that applies to the FOMA card security function.
Attaching/Removing the Battery Pack z Make sure to turn the FOMA terminal off before removing the battery pack. Note also that keep the FOMA terminal folded and held in your hand. ● Removing 1 Remove the back cover the battery pack 2 Remove Press the tab on the side of the battery pack in direction ① , then lift upwards in direction ② to remove the battery pack.
■ Battery pack charging Before Using the Handset • For details, refer to the manuals for the FOMA AC Adapter 01/02 (optional), FOMA AC Adapter for Global Use 01 (optional) and FOMA DC Adapter 01/02 (optional). • FOMA AC Adapter 01 supports voltage of 100V AC only. • FOMA AC Adapter 02 and FOMA AC Adapter 01 for Global Use support voltage from 100V AC to 240V AC, but the plug shape of the AC adapter is for 100V AC (domestic). For overseas use, the compatible conversion plug adapter is required.
■DC adapter (optional) Cigarette lighter socket Charging the battery pack with the desktop holder Plug the connector with arrows side facing upward 1 Before Using the Handset 3 3 Plug Connector 100V AC power outlet FOMA DC Adapter 01/02 2 the external connector cap of the 1 Open FOMA terminal 2 Plug Plug the AC/DC adapter connector horizontally into the FOMA terminal’s external connector Desktop Holder SO11 the AC adapter into the outlet 3 Plug Plug the DC adapter into the cigarette lighter sock
N When the battery runs out Before Using the Handset z The center illumination lamp lights up in red during charging. The charge lamp turns off when charging ends (Full charge). If the FOMA terminal is turned on, “ ” flashes during charging and “ ” lights when charging ends. You can set illumination for charge start/end.→ p.92 z The battery pack cannot be charged separately. Always charge the battery pack while it is attached to the FOMA terminal.
N N z If the battery runs out or “Auto power OFF” activates then the power is turned off, a screen appears indicating that the power was turned off last time. z When the FOMA card (UIM) is inserted, Select language setting is stored on the FOMA card (UIM). z When “Select language” is set to “English”, only two options of “ON/OFF” are available for “Info notice setting”. Turning the FOMA terminal off power is turned off.
Setting the main clock “SETTINGS” “Clock” 1i time” “Auto time adjust” “Set main Before Using the Handset 2 Select any item: Auto……Adjusts the date and time of the main clock automatically. Auto……Adjusts the date and time automatically based on the retrieved time information and time zone information. Local time appears during international roaming. Manual(Time zone set)……Select a time zone to display the local time.
Voice/Videophone Calls ■ Making a Voice/Videophone Call Making a Voice/Videophone Call .................................................................................... Switching a Voice/Videophone Call During a Call (Caller).............................................. Making International Calls ......................................................................... WORLD CALL Using Handsfree Call During a Call ................................................................
Making a Voice/Videophone Call Voice/Videophone Calls * FOMA SO706i does not contain front camera. A substitute image (Chara-den) or rear camera image will be sent to the other party. A substitute image (Chara-den) can be changed to an image in “My picture”, etc. using “Select image”. → p.67 1 Enter the phone number of the other party The “Enter phone number” screen appears. Always start by entering the area code, even for calls within the same area. You can enter up to 80 digits for the phone number.
■ When the 2in1 is in Dual mode The Outgoing number selection screen appears. Select a phone number. 3 y after talking N What is the Videophone You can use the videophone call function between the terminals that support the DOCOMO videophone system. z DOCOMO videophone conforms to “the 3G324M*2 standard set down in the international 3GPP*1 standards”. Your FOMA terminal cannot connect to a videophone terminal that uses a different system from DOCOMO videophones.
Brightness……Five brightness levels (-2 to 0 to +2) are available. White balance……Sets image color tones. →p.123 This setting is also applied to the equivalent camera functions. Color mode set……Selects the image effect from “Normal/Sepia/Monochrome”. This setting is only retained during the call. Voice/Videophone Calls Photo mode……Sets modes suited to the scene being shot. →p.122 Chara-den set.……Set the following when Chara-den is used. This setting cannot be set for the camera images.
For additional information regarding WORLD CALL, refer to the contact information provided on the back of the manual. The digital communication fee is charged after the appearance of this screen. ■ To switch a videophone call to a voice call Videophone in-call screen (p.48) u (FUNC) “Change to voice” N z It takes about 5 seconds to switch the calls. Note that the signal quality may affect how long it takes.
z As “Auto int’l call set.” in “Int’l dial assistance” is set to “ON” (automatically added) at the time of purchase, the FOMA terminal automatically dials the IDD prefix code. 1 On the standby screen, dial the following; + (0 (1 second or longer)) →Country code→ Area code (Long distance code)→The other party’s phone number Voice/Videophone Calls If the area code (long distance code) begins with “0”, omit the first “0”. However, to call to ordinary phones in Italy, “0” is required.
the standby screen 1 On h (Received calls) The “Redial screen (list)”/ “Received calls screen (list)” appears. Ex. Voice call Ex. Videophone call “ ” disappears when you make a voice call. “ ” is changed to “ It is recommended to keep a distance of about 30 cm from the FOMA terminal during a handsfree call.
Icon*1 / Description / *2 Incoming and outgoing/missed/ unconfirmed missed international videophone calls Incoming and outgoing calls to B mode for 2in1 setting / Recorded voice record message/ videophone message N z When you have subscribed to Multi number and make a call from the Received calls record screen, the phone call is made from the number which received the call regardless of the “Set Multi Number” setting.
N 2 r (voice call) /o (V. phone) When the other party’s terminal receives Chakumoji, the result “Transmission completed” appears. N Using Chaku-moji When making a voice call or videophone call, you can send a message (Chaku-moji) to the other party to show the summary of the call, etc. beforehand. z 5 Chaku-moji messages are stored at the time of purchase. You can change the pre-installed Chakumoji messages.
N Voice/Videophone Calls z Even when you receive a call whose ring tone sounded for shorter time than the time set in the “Set mute seconds” of “Ring time (sec.)”, Chaku-moji is displayed and recorded in the Received calls record. z Depending on the status of the sender or receiver, Chaku-moji may not be displayed even if you receive a call with Chaku-moji. z When the Original lock is set to “Chaku-moji”, Chakumoji is not displayed even if you receive a call with Chaku-moji.
3 r (voice call)/o (videophone) N Edit……Edits the dialing data. Send pause dial……Enters the phone number of the other party and sends the dialing data. Each time you press r, the dialing data up to P (pause) is transmitted. Delete……Deletes the stored dialing data. Transmitting the dialing data as a pause dial “SETTINGS” 1i dial” d (Send) Sending Push Signals By sending push signals from the FOMA terminal, you can use services such as ticket ordering and bank balance requests.
“SETTINGS” 1i setting” “Dialing” “Prefix The “Prefix setting” screen appears. the item to 2 Highlight store or change o (Edit) Voice/Videophone Calls the name to be 3 Enter stored Prefix setting Function menu p.58 You can enter up to 8 double-byte or 16 singlebyte characters. the numbers (prefix) 4 Enter You can enter up to 10 digits. Prefix setting screen (p.58)/IDD Prefix setting screen (p.52) Edit……Edits the prefix number or IDD prefix code.
Making Handsfree Calls in the Car N z To operate from the handsfree device, set the USB mode to “Communication mode”. z The display and ring tones used for incoming calls and mail are as specified in the FOMA terminal settings. z When the handsfree device is set to emit the sound from the handsfree device, the ring tone still sound through the handsfree device even when the FOMA terminal is set to Manner mode or the ring volume is set to “Silent”.
Ringing screen/Videophone ringing screen (p.59) Call Rejection……Terminates the receiving call without answering. Call Forwarding……Forwards the call. The call is forwarded regardless of the “Call Forwarding” setting “Activate/Deactivate”. Voice/Videophone Calls Voice Mail……Connects the call to the voice mail service center. The call is connected to the voice mail service center regardless of the “Voice Mail” setting “Activate/Deactivate”.
OFF……You can answer the call only with r or d (Answer/Subst.). N z Even when “Quick silent” is set, the “Any key answer” function is used in Manner mode. Ending/Holding Calls with the FOMA Terminal Folded You can set how your FOMA terminal operates when it is folded during a voice or videophone call. 1 i “SETTINGS” “Talk” “Setting when folded” Select any item: No tone……Mutes the sound. The other party does not hear the hold tone. Tone on……Puts a call on hold (holding).
Holding the Ringing/Current Call 1 While ringing y Voice/Videophone Calls The FOMA terminal makes three rapid beeps and puts the call on hold. The caller hears a message saying that you cannot answer at the moment and the call is held without hanging up.
z If the FOMA terminal is set to Public mode (Driving mode) while network services are activated, voice calls and videophone calls are handled as shown in the Table 1 (p.63). z When you receive a mail, the ring tone does not sound and the “New mail” shortcut icon appears on the standby screen. When you receive a call after setting Public mode (Power OFF) and turning off the FOMA terminal, the caller hears the message “The person you are calling is in an area where cell phone should not be used.
When You Cannot Answer a Received Call When you cannot answer a received call, the appears on the standby screen. When you select , you can check the date, time and the caller ID about the call. z “Advising shortcut icons” → p.94 Voice/Videophone Calls the standby screen 1 On “ ” d Select The Received calls list screen appears. → p.
Setting Record message “SETTINGS” “Incoming call” 1i “Record message” Select any item: ON……Select the desired type of answer message from “Japanese 1/Japanese 2/English/Voice announce 1*/Voice announce 2*”, then set the record message. OFF……Cancels the Record message setting. the ringing time (between 000 to 2 Enter 120 seconds in 3 digits) The record message is set and “ appear on the standby screen.
the standby screen d Select 1 On “ ” (Record message) or “ ” (Record VP message) Voice/Videophone Calls The “Play/Erase msg.” screen or “Play/Erase VP msg.” screen appears. “ ★ ” appears for the recorded item. ■ To play the recorded Play/Erase msg. message with the menu Function menu p.66 operation i “LIFEKIT” “Play/Erase. msg.” (voice) or “Play/Erase. VP msg.
Setting Functions for the Videophone “SETTINGS” “Videophone” 1i The “Videophone settings” screen appears. Videophone settings Visual preference……Selects the image quality of videophone calls from “Normal/Prefer img qual/ Prefer motion spd”. Select image→ p.67 Auto redial as voice……Sets whether to switch to a voice call when a videophone call cannot be made (ON/OFF). Display setting Main display……Selects the image displayed on the main display from “Other side/My side”. Ntfy switch-mode →p.
V-phone answerphone……If you have subscribed to the “Voice Mail Service”, the videophone call is connected to the Voice Mail service center regardless of “Activate/Deactivate” setting of Voice Mail. When you have not subscribed to this service, “Packet downld priority” is activated. Voice/Videophone Calls Call forwarding……If you have subscribed to the Call Forwarding Service, the videophone call is forwarded regardless of “Activate/Deactivate” setting of “Call Forwarding”.
Phonebook Phonebooks Available with the FOMA Terminal ............................................................. Adding Information to the Phonebook .................................................. Add to phonebook Adding Phonebook Entries from the Redial, Dialed Calls and Other Records ............... Renaming Groups....................................................................................... Group setting Making a Call from the Phonebook......................................................
Phonebooks Available with the FOMA Terminal Your FOMA terminal contains two phonebooks. One is the phonebook in the FOMA terminal (Phone) itself, for which you can set a range of functions, and the other is the UIM (FOMA card) phonebook, which can also be used in other FOMA terminals. Each phonebook can be used differently depending on the purpose.
3 Select any item: (group)……Selects a group number among “Group 01-19” for “Phone” or among “Group 01-10” for “UIM”. If no group is selected, the entry is automatically assigned to “No Group”. (mail address)……Enters the e-mail address. You can enter up to 50 single-byte alphabets, numbers and symbols. Also select an icon for “Phone”. Once you have stored the first e-mail address, the “ ” option appears on the Phonebook edit screen. Select this option to store an additional email address.
Adding Phonebook Entries from the Redial, Dialed Calls and Other Records You can add information to the phonebook from the “Received calls”, “Dialed calls”, “Redial”, “Received address”, “Sent address”, “Text reader”, Site screen or enter phone number screen, etc. Phonebook 1 Received calls screen (p.
Making a Call from the Phonebook You can make a call by searching for the phonebook entry from the FOMA terminal (Phone) phonebook or the FOMA card (UIM) phonebook. z When tabs appear on the phonebook list screen, you can switch the display as follows: p( ) Four times List of “Ta-column” z You can use v to switch pages within the same tab.
● Accessing the phonebook from the Redial or Dialed Calls record 2 Select the search method: Search reading…… Enter the reading c Enter the reading from the beginning. You do not need to enter the entire name. Search name…… Enter the name c Enter the name from the beginning. You do not need to enter the entire name. Phonebook Search phone No.…… Enter the phone number c Enter some digits numbers of the phone number.
Phonebook detail screen (p.73) Set secret*1*4 →p.103 Copy to UIM*5 →p.255 Edit phonebook→p.76 Chaku-moji →p.55 Set large font⇔Set normal font……Switches the displayed font size between “Big font/Standard font”. →p.93 Dial setting Delete data→p.76 Notify Caller ID→p.56 Prefix numbers→ p.58 Int’l call→p.52 Select image……Selects the image used during a videophone call from “My side/Chara-den”. Select “Release settings” to cancel the setting. Ring tone/Image*1 →p.77 Restrictions*1 →p.
Editing the Phonebook detail screen (p.73) 1 Phonebook u (FUNC) “Edit phonebook” Edit the respective items Edit the required items using the procedure used in “Add to phonebook”. Adding information to the phonebook → p.70 Phonebook ■ To store in a new memory number Select “ ” Enter a memory number (000 to 999) that has not already been stored. The original phonebook entry is left in its preedited state and the edited entry is stored as a new phonebook entry with a different memory number.
Setting Different FOMA Terminal Actions for Each Phone Number and Mail Address detail screen (p.73) 1 Phonebook u (FUNC) “Ring tone/Image” The “Ring tone/Image” screen appears. “ ★ ” appears next to the selected function. The available functions vary Ring tone/Image depending on the item selected in the phonebook detail screen. ■ To set this function for each group Group setting screen (p.
Checking the Ring tone/Image settings You can check the phonebook entries or groups set in “Ring tone/Image” by function or item. 1 Phonebook list screen (p.73) u (FUNC) “Ring tone/Image” The “Ring tone/Image” screen appears. “ ★ ” appears next to the items to which this function is set. Phonebook the function or item with “ ★ ” 2 Select Highlight the function or item with “★” u (FUNC) Select any item: Check settings……Checks the setting status.
Making a call/composing a mail from Choku-Den Storing the Phonebook at the Data Security Center 1 Choku-Den screen (p.78) Use v to display Choku-Den screen to make a call You can also use 1 to 5 to move to the tab of the respective number. ■ To compose a mail Use c to select “MAIL” → p.156 ■ To make a videophone call Use c to select “VIDEO PHONE” Choku-Den screen (p.
● Restoring/updating the phonebook The phonebook data stored at the Data Security Center can be stored on the FOMA terminal from the site of the Data Security Center. You can also edit the phonebook data stored at the Data Security Center from a PC, etc. For details on how to use, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. N Phonebook z Automatic update is not performed when another function is activated while updating the phonebook.
Sound/Screen/Light Settings ■ Sound Settings Changing the Ring Tone .......................................................................... Select ring tone Setting 3D Sound.......................................................................................... Sound effect Setting the Vibration to Notify You of Incoming Calls.......................................... Vibrator Changing the Ringback Tone...............................................................
Changing the Ring Tone
N z When you select the Chaku-Uta-Full® in the Movable contents folder and “Fullsong ring tone” is set, the selected Chaku-Uta-Full® is moved to the Inbox folder of “Music”. When “Point ring tone” is set, the selected portion is clipped as an i-motion and stored in the folder of “i-motion”. z When you set Chaku-Uta-Full® stored on the FOMA terminal (Phone) as a ring tone with “Point ring tone”, it is not clipped as an i-motion and the selected portion is set to the ring tone.
Setting 3D Sound Enjoy rich sounds of melodies, voice/videophone call and mail ring tones, sound effects and i-motion when an earphone/microphone (optional) is connected. “SETTINGS” “Incoming call” 1i “Sound effect” “Stereo&3D sound” “ON” or “OFF” ● Sound effects Sound/Screen/Light Settings Create 3-dimensional and resonating sounds using an earphone/microphone. Sound effects allow you to enjoy i-αppli games and melody playback with richer and more realistic sound.
Setting the Keypad Tone z Setting this function to “OFF” also disables the battery level tone and the warning tone. z The keypad sound is played at the level set in “Volume” during a call, and fixed at the same level while not talking on the phone. “SETTINGS” “Other settings” 1i “Keypad sound” “ON” or “OFF” This function sets to emit a sound when charging starts or is completed.
Switching Off the FOMA Terminal’s Tone You can set the FOMA terminal not to play the ring tones or keypad tones through the speaker with a single key operation. z Refer to the Table 1 (p.87) and Table 2 (p.87) for details of Manner mode setting. z In “Manner mode set”, you can select “Manner mode/Super silent/Original” as the FOMA terminal operation mode when Manner mode is set.
[Table 1] When you set Manner mode Item Record message activation Manner Mode Super silent Record message (p.65) setting Vibrator ON Original (displays the Original manner mode settings) “Record message” setting “Vibrator” setting Silent “Phone vol.” setting Ring volume for mail, packet communication, MessageR/F and Area Mail Silent “Mail vol.” setting Area Mail beep tone Silent “Level 6”* Alarm volume (including snooze function) Silent “Alarm vol.
Setting the Original manner You can set your preferred Manner mode setting. z The following are the default settings of the “Original” manner mode: • Record msg.: OFF • Vibrator: ON • Phone vol.: Silent • Mail vol.: Silent • Alarm vol.: Silent • i-αppli vol.: Silent • VM tone: ON • Keypad sound: OFF • Mic sensitiv.: Up • LVA tone: OFF Changing the Display You can also set the still images you shot or downloaded images as the standby screen, dialing/ calling screen, etc.
Changing the standby screen image z Some screens change its image depending on the timing. z This function sets the standby screen when 2in1 is in A mode or “2in1 setting” is set to OFF. The settings are not applied when set to “B mode” or “Dual mode”. Set “Standby display” of “2in1 setting”. setting screen (p.88) “Stand1 Display by display” Select any item: OFF……No image is displayed. Calendar……Sets a calendar. No background……Displays the calendar only. My picture……Selects the standby screen image.
Setting the Color for Incoming Call Display Setting the Display and Keypad Lighting You can display names, phone numbers or mail address on the Redial/Received calls screen or sent/ received address list screen with their font color changed. “SETTINGS” “Incoming call” 1i “Disp. call/receive No.
Changing the Display Design Reset menu op. log*……Resets the menu for the automatically sort of menu items (p.33). * : Only available on the menu display that supports this function. You can change the text, background and the background pattern for the function keys. “SETTINGS” 1i “Display design” “Display” Select any item: Color pattern……Selects the color pattern from “White/Yellow/Blue/Red/Black”.
Original theme screen (p.91) z This setting is displayed only when you change the Original theme setting. Reset……Restores the changed main menu icon or background image to the default settings. All reset……Restores all the main menu icons and background image to the default settings. Creating My select Sound/Screen/Light Settings You can store the frequently used functions as “My select” and easily call them up. → p.31 z You can store up to 10 My select entries.
Demo play……Flashes the illumination in order in patterns other than Random and Melody linked. (Color is all in “Rainbow”) ■Screens that can be set with Separate setting Target screen for setting The character entry screen (Edit), the new mail screen (excluding SMS), the preview screen (excluding he sent SMS, etc) Mail Mail list/detail screen, screens displayed when referring to Header/Signature/ Template i-mode Sites screen, Screen memo, Message list/detail screen Full brw.
N Icon z The Flash movie clock time on the standby screen cannot be set in this function. Operation when selected Dictionary: Displays the Dictionary screen My select: Displays My select Calculator: Activates the Calculator 1Seg: Activates 1seg Using Shortcut Icons Pasting frequently phone numbers and functions to the standby screen as shortcut icons provides a quick and simple way of accessing those numbers and functions.
Icon Operation when selected When the updating has not been done successfully or when the new pattern data has been released: The screen prompting you to update the pattern data for the scanning function appears Changing the theme of My shortcut on the standby screen “SETTINGS” 1i shortcut” “Display” “My When the Data Security Service could not be updated: Displays the screen that allows you to connect to the Data Security Center after you enter your security code The “My shortcut” screen (Theme) appea
Icon Reset my shortcut……Restores the settings to the default settings (“1Seg”, “Photo mode” and “My selection”). (Red) After selected Displays the unread mail list (Red) Change theme……Changes the theme of My shortcut. Displays the “Inbox” Delete……Selects the deleting method from “Delete this/ Delete selected/Delete all”. “About multiple-choice” → p.
Icon After selected Displays a message notifying that nothing is recorded. Or, displays “Play/Erase VP msg.
Kisekae Tool set list screen (p.97) Contents checking screen (p.98) Edit title……Edits the title. You can enter up to 10 doublebyte or 20 single-byte characters. Set all*1/Finish*2……Sets to the currently displayed items all at once. Check Setting info……Checks the set contents. Take Setting info*2……Retains the current settings and stores in “ お気に入り” (My favorite). Reset Setting info……Deletes the “お気に入り ” (My favorite) settings.
Security Settings ■ About Your Security Codes Security Codes Used on the FOMA Terminal ................................................................. Changing Your Security Code.......................................................... Change security code Setting Your PIN Codes .................................................................................. PIN setting Release PIN Lock ...........................................................................................................
Security Codes Used on the FOMA Terminal To make the FOMA terminal more convenient and secure, some functions require the security code. In addition to the security code for various FOMA terminal operations, you also have the Network security code for accessing network services and the i-mode password. Make use of the FOMA terminal using an appropriate security code according to the purpose.
z If you enter a wrong PUK code ten times consecutively, the FOMA card is locked. Enter PIN1 PIN1 code entry set……Sets whether PIN1 code to be input when you turn the FOMA terminal on or not (ON/OFF). Set new PIN1/PIN2 Release PIN Lock 3 consecutive errors Entered successfully Enter PUK 3 consecutive errors 10 consecutive errors
z When Dial lock or Omakase Lock is set, the “Alarm”, “Schedule”, “To Do list”, “1Seg booking program” and “1Seg timer recording” are not given. Once Dial lock or Omakase Lock is released, the “ (Missed alarm)” or “ (Missed program)” shortcut icon appears on the standby screen. z The shortcut icon is not displayed when Dial lock or Omakase Lock is set. Once Dial lock or Omakase Lock is released, these icons reappear.
N z The FOMA terminal is locked if the subscriber requests even if the subscriber and the user of the FOMA terminal are different. z If the FOMA terminal is on voice or videophone call when you try to release Omakase Lock, the lock is released after the call ends.
N Security Settings z If the caller of the incoming call is stored as secret data and notifies the caller ID, the stored name or image is not displayed and only the phone number is displayed. Only the phone number is displayed in “Received calls” record. Setting Secret mode or Secret data only mode displays the name stored in the “Received calls” record.
■Function menu (Data list screen) N z When the image, movie or i-motion pasted as a shortcut icon is stored in the Secret folder, it is not displayed even when the shortcut icon is selected. z Even when the Bookmark, received mail or sent mail pasted as a shortcut icon is stored in the Secret folder, normal operation is performed when the shortcut icon is selected. ● Function menu of the Secret folder Some functions for the folder or data in the folder are restricted in the Secret folder.
Changing a secret data to normal data To change the secret data back to normal data, move the data from the Secret folder to another folder. 1 Switch the FOMA terminal to Secret mode or Secret data only mode → p.103 list screen (p.
● Operations during Original lock Customizing the function or data to be locked If you try to use the locked function or data when Original lock is set, you are asked to enter your security code. z If you enter your security code, the lock is deactivated temporarily and you can use the locked function or data (you cannot use the functions of “Dial/sending mail” and “Incoming/Mail disp.” when the lock is released temporarily).
[Table 1] Functions and data for the Original lock Group Function Operations when locked/Notes Data disp. Edit del. Mail Mail Mail member Locks the activation of each function. • You can view the Area Mail contents. i-mode i-mode Locks the i-mode function (i-mode, Full Browser and i-Channel). Locks the i-mode and Full Browser bookmark list displays. i-αppli i-αppli Locks the i-αppli function or IC card list display. • IC card function is not locked.
Group Other settings Function Operations when locked/Notes Text memo Locks the activation of text memo. Notice designate calls No alarm notification is given even when the specified upper cost limit is exceeded. • Once the lock is released, the “Notice designate calls” shortcut icon appears. Chaku-moji Locks the function of editing or setting Chaku-moji, and the function of “Select message” or “Sent messages” when you send the Chaku-moji, and Chakumoji is not displayed.
Category list screen (p.107)/ Group list screen (p.107) Select……Selects all items in the highlighted item. Release……Deselects all selected items in the highlighted item. Select all……Selects all items under the displayed item. Release all……Deselects all selected items under the displayed item. Function list screen (p.107) Select all……Selects all the displayed items. Release all……Deselects all the displayed items.
Using the IC Card Authentication You can release Dial lock or Keypad lock or you can perform the user authentication without entering your security code on the screen which requires your security code entry only by placing the FOMA terminal on a FeliCa-compatible contactless IC card (external IC card). z You can use the IC card authentication even when IC card lock is set. z You can store up to 2 contactless IC cards.
Disabling the Side Key 3 o (Finish) Setting lock for individual folders You can disable the function of the side keys (a ( ▲マ ナー ) and s (▼メモ )) when the FOMA terminal is folded. z In the following situations, the side key is enabled regardless of this setting: • When the FOMA terminal is opened • When a flat-plug earphone/microphone with switch (optional), etc. is connected w (1 second or longer) 1i The side key operations are disabled (ON) and “ appears.
Call Forwarding……Forwards incoming calls from the specified phone number regardless of the Call forwarding service setting (Activate/Deactivate). Voice Mail……Transfers incoming calls from the specified phone number to the Voice mail service center regardless of the Voice mail service setting (Activate/Deactivate). “ ★ ” appears next to the selected function. ■ To release a selected function Select the function with “ ★ ” The function is released and the “★” disappears.
Rejecting Calls from Unidentified Callers Muting Ring Tones for Callers Not Stored in the Phonebook You can accept or reject voice/videophone calls from callers who do not provide the caller ID depending on the reason for no caller ID.
z You cannot set “Reject unknown” when “Set mute seconds” of “Ring time(sec.)” is set to “ON”. “SETTINGS” “Lock/Security” 1i “Reject unknown” Enter your security code “Reject” or “Accept” N Disabling Making/Receiving Calls, etc. You can set the FOMA terminal not to make or receive voice or videophone calls, use i-mode, or send or receive mails. This is useful when you want to use the FOMA terminal without worrying about interruptions such as incoming voice or videophone calls.
z Refer to the following pages for storing operations of Data Security Service: • “Storing the Phonebook at the Data Security Center” → p.79 • “Storing mails at the Data Security Center” → p.176 • “Storing images at the Data Security Center” → p.229 Other Security Settings Apart from those explained in this chapter, there are functions/services relating to security settings as shown below.
Camera Before Using the Camera ............................................................................................... Shooting Still Images .................................................................................... Photo mode Shooting Movies ........................................................................................... Movie mode Capturing Important Scenes.................................................................... Chance capture Using Voice Mode .....................
Before Using the Camera You can use the FOMA terminal’s built-in camera to shoot photos (still images) and movies. z You cannot activate the camera function or shoot images when the FOMA terminal is folded. Using the camera ● To set to camera mode There are 3 methods: ① Select the shortcut icon ( ) on the standby screen ② Press p (1 second or longer) on the standby screen. ③ Select “Camera” from “LIFEKIT” of the main menu or Simple Menu.
■Flashing of illumination when shooting z The center illumination lamp lights up or flashes as follows: • Shooting screen activated: Flashes in red • Shooting still images, M-continuous mode: Lights in red (about 3 seconds) • A-continuous mode: Lights in red (when shooting) • Shooting movies, recording in Voice mode: Flashes in red • Auto timer activated: Flashes in blue → p.
[Table 3] The approximate shooting time that can be saved by destination to save Available shooting time for a single movie Quality setting Long dur. Fine Super Fine Normal mode mode mode Destination: FOMA SO706i (Phone) QVGA 2MB Normal 82s 34s 16s 8s Video 88s 35s 17s 8s Voice 21min. QCIF 500KB Normal 104s 53s 20s 16s Video 128s 64s 22s 16s Voice 316s 2MB Normal 428s 219s 82s 63s Video 524s 262s 88s 66s Voice 21min. Sub 500KB Normal 176s 67s 29s 20s QCIF Video 256s 86s 32s 22s Voice 316s 2MB Normal 12min.
……The available capacity that can be saved Key operation for camera mode against the total capacity • Blue: 500K bytes or more remaining • Yellow: Less than 500K bytes remaining • Red: No memory available*2 1 3 *1: The displayed count and the capacity are only an approximate figure. This icon does not appear when the destination to save is set to “microSD” and no microSD card is inserted. *2: Shooting is available except when shooting movies with “File size” set to “Long time”.
● Icons and settings of the shooting menu Selecting the shooting menu When you display the shooting menu on the screen, you can set various settings only by selecting icons. Description of the displayed menu and highlighted icon z The selectable items are different depending on the camera mode. z Some menus are unavailable depending on the shooting condition (when using the camera from other function such as mail function, etc.) Shooting screen ① o ② ③ ④ ⑤ ⑥ ① CHG camera-mode Movie mode……p.
OFF……Turns off the shooting effects. * Only “Portrait”, “Scenery” or “Close-up” can be set for Movie mode. ⑤ Brightness (When the camera launched: ± 0) / / / / …… Brightness of the image (+2/ +1/±0/-1/-2) ⑥ White balance (Default: Auto) In Photo mode, this can be set only when “Photo mode” is set to “OFF”.
N z The displayed file size is only an approximation. Photo mode checking screen (p.123) Save……Saves the images to the folder specified in “Select to save”. Mirror save……Inverts the left and right of the displayed image and saves the image to the folder specified in the “Select to save” setting. Compose message* →p.126 You can also compose an i-mode mail or Deco-mail® by pressing o (MAIL) on the Photo mode checking screen. Edit image……Adds a frame or effect to the image. “Editing Images”→p.
( ) (1 second or longer) 3p “Save” or “Mirror save” Select all……Selects all the still images you shot and marks the checkboxes of the images ( ). The image is saved to the folder specified in “Select to save”. ■ To store selection Select images you want to save p ( “Save” or “Mirror save” “About multiple-choice” → p.38 Release this……Releases the still image indicated by the frame and releases the checkbox of the image ( ).
Shooting framed images The image sizes supported by FOMA SO706i is under VGA (640 × 480). z You can use the downloaded frames in addition to the pre-installed ones. mode shooting screen (p.123) 1 Photo u (FUNC) “Select frame” Select a frame ■ To cancel the framed image “OFF” the camera at the object 2 Point d (Record) The “Frame shooting check” screen appears. ■ To change the frame before saving u (FUNC) “Change frame” Camera 3 d (Save) N z Not available when 2in1 is in B mode.
Movie mode shooting screen (p.126) Memory info……Displays the amount of stored data for movies. Help……Displays the guide for shooting. Front camera⇔Rear camera……Switches between front camera and rear camera. CHG camera-mode……Changes the camera mode. Select size・File size……Sets the same setting as the shooting menu (p.122). Quality setting (default: Normal)……Selects the quality and duration for shooting movies from “Long dur. mode/ Normal/Fine mode/Super Fine mode”. When set to “Long dur.
Capturing Important Scenes Even if the available shooting time is reached when shooting a movie, you can continue the shooting until the scene you want to shoot comes. z The movie you shot is saved for the available shooting time (the default is 3 minutes 38 seconds) from the end of the movie with the starting point reset to fit that time. The movie shot before that time is not saved. mode shooting screen (p.
■ To cancel the Auto timer settings u (FUNC) “Auto timer” “OFF” ■ To stop the timer while it is running o (Quit) or t N z During the Auto timer countdown, you can shoot manually by pressing d (Record). z The Auto timer cannot be used in M-Continuous mode. Using the Bar Code Reader ■JAN codes and QR codes z JAN code A bar code consisting of vertical lines (bars) of various widths and spaces to represent numbers. The FOMA terminal can scan 8-digit (JAN8) and 13-digit (JAN13) bar codes.
N z You cannot save the scanned data to the microSD card. the scanned data 2 Select The “Reading data detail” screen appears. Scanning screen (p.129) Reading data list……“Using the scanned data”→ p.130 Ｂａｒ ｃｏｄｅ ｒｅａｄｅｒ Ａｄｄ ｔｏ ｐｈｏｎｅｂｏｏｋ Ｎａｍｅ ＴａｒｏＤｏｃｏｍｏ Ｒｅａｄｉｎｇ ＴａｒｏＤｏｃｏｍｏ ＴＥＬ ０９０ＸＸＸＸＸＸＸＸ ＴＥＬ ０３ＸＸＸＸＸＸＸＸ Ｅ−ｍａｉｌ ｄｏｃｏｍｏ．ｔａｒｏ．△△＠ｄｏ cｏｍｏ．ｎｅ．ｊｐ Ｂｉｒｔｈｄａｙ ２．１２．１９７０ 〒 １ＸＸＸＸＸＸ Ａｄｄｒｅｓｓ １−２−３ ＸＸ， ＸＸ−ｋｕ， Add shortcut →p.94 Reading data detail Using the scanned data Function menu p.
Add to phonebook……Stores the scanned data to the phonebook when “Add to phonebook” is highlighted.→p.70 When a phone number is highlighted, it is stored to the phonebook. When a mail address is highlighted, it is stored to the phonebook. Add bookmark……Stores the reading data to Bookmark when “Add bookmark” is highlighted. → p.142 When a URL is highlighted, it is stored to Bookmark. Save image……Stores the image data to My picture of the Data box.
Maximum number of characters that can be scanned Item Dictionary* Japanese 32 in double-byte, 64 in singlebyte English 64 in single-byte * : This option is available when the Text reader is launched from Dictionary. Scanning text z Before scanning, set to the close-up mode by moving the lens selector switch to (macro lens). → p.118 “LIFEKIT” “Text reader” 1i The “Text reader” screen appears.
■ To select the character to edit Use v to highlight the character to edit Press the candidate No. Press r to change the cases between upper and lower if it can be changed. Using the text data z You can use the following scanned data: Item Description Add to phonebook Adds the name, phone number, mail address, postal code, address and memo to the phonebook→ p.70 Candidate ■ To edit in the text editing u (FUNC) “Edit” Edit the text The text can be edited in the typical text editing.
Add to phonebook……Adds the scanned data to the phonebook. The stored data varies depending on the displayed reading data or screen. Add bookmark……Add the URL to the Bookmark in URL mode. Search phonebook……Searches the phonebook using the scanned data. You cannot search the phonebook on the scanning screen, in Card read mode or Compose message mode. Add to memo……Adds the scanned data to Text memo. You cannot store the scanned data in Card read mode or Compose message mode.
i-mode/i-motion/i-Channel What is i-mode?.............................................................................................................. 136 ■ Viewing sites Viewing a Site ........................................................................................ i-mode menu/site Viewing and Using Sites ................................................................................................. Registering My Menu Entries....................................................................
What is i-mode? The i-mode service enables you to use an i-modecompatible FOMA terminal (i-mode terminal) display to access online services such as i-mode mail, connecting to the Internet and sites (programs), etc. z i-mode is a pay service you need to apply for. z For details on i-mode, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. i-mode/i-motion/i-Channel ■Notes on using i-mode • Contents on sites (programs) or Internet websites are normally protected by copyright laws.
N N z On some i-mode-compatible site and websites, some characters may be difficult or impossible to see due to the selected colors. z When you are requested information on music you play by the site, the confirmation screen concerning transmission of music information appears. Select “YES” to send the information (title, artist name and play date) on the music you play in your FOMA terminal. The information is used to offer information that IP (information service provider) customized to the customer.
Site info Title……Displays the page title to check. URL……Displays the page URL to check. If the entire URL does not appear, press d (Select), then use c to move the cursor to check the rest of the URL. Pressing d (Select) again hides the cursor. Certificate……Displays the contents of the SSL certificate when the page is compatible with SSL. Site settings Replay……Plays the Flash movie or animation on the page again from the beginning. Set image disp.……Sets whether to display the images on the page or not.
Viewing and Using Sites This section describes the operations for viewing sites or websites. Image display z The FOMA SO706i can display GIF and JPEG format images and Flash movies (p.140). However, the FOMA terminal may be unable to display some images regardless of the format. z When a Flash movie is displayed, the display operation may differ from that on a normal site.
• When site data is loaded from cache, the text and settings you entered on previous visits is not displayed. • The cache is cleared when you exit i-mode. • When you download SSL-compatible pages from cache, the message appears indicating that the SSL page will be displayed. You can open up to 5 websites (up to 6 websites when including i-Channel). z You can use the tab to switch pages with o( ) when multiple websites are opened.
N z When some Flash movies are saved or saved as a screen memo, part of the images may not be saved or they may otherwise differ from the way they appear on the site. Registering My Menu Entries My Menu provides you with a quick and convenient way to connect to frequently visited sites. z You can register up to 45 sites in My Menu. z Some sites cannot be registered to My Menu. z To connect quickly to a website, use “Bookmark”. screen (p.
N z When you enter URLs and connect to sites, visits to the same URL are logged as separate entries. URL list screen (p.141) Add shortcut →p.94 Compose message*……Composes an i-mode mail with the URL pasted in the message. Set as home URL……Stores a URL as your home URL. You can only store 1 URL as your home URL. Delete……Selects the deleting method from “Delete this/ Delete selected/Delete all”. “About multiple-choice” → p.38 * : Not available when 2in1 is in B mode.
Bookmark list screen (p.142) Move……Selects from “Move this/Move selected/Move all” and moves the bookmark to the other folder you select. “About multiple-choice” → p.38 Edit title……Edits the title. You can enter up to 12 doublebyte or 24 single-byte characters. Add shortcut→p.94 Compose message*1……Composes an i-mode mail with the URL pasted in the message. Attach to mail*1……Composes an i-mode mail with a bookmark attached. iC transmission→p.259 Send Ir data→ p.258 Copy to microSD→p.
Screen memo list screen (p.143) Edit title……Edits the title. You can enter up to 11 doublebyte or 22 single-byte characters. Protect ON/OFF……Protects or unprotects screen memo. Protected memo titles are marked with “ ”. No. of memos……Displays the numbers of stored and protected screen memos respectively. Delete……Selects the deleting method from “Delete this/ Delete selected/Delete all”. “About multiple-choice” → p.38 N z Up to 50 screen memos can be protected.
Downloading Melodies from Sites You can set your favorite song, the latest hit song downloaded from a site or a stored melody attached to an i-mode mail as a ring tone on your FOMA terminal. z You can store up to 200 melodies (the number of melodies you can actually store may be reduced depending on the file size). 1 Sites screen (p.
● For PDF data that could only be downloaded partially < (pale blue), (pale blue)> 1 PDF list screen (p.261) Select a PDF file to view Before the document is displayed, a message appears asking whether to download all the remaining data. 2 “YES” Connected to the site and downloading of all the remaining data starts. After downloading is completed, the “PDF data” screen (p.261) appears. (Some documents may not be viewable even if the download was successful.
N Mail To function z If the pre-installed Chara-den is deleted, you can download from “PlayNow” by SO. “iMenu” “メニューリスト” (Menu List) “ケータイ電話メーカー ” (Mobile phone manufacturer) “PlayNow by SO” You can read the QR code on the right and select the displayed URL to access website. z The file name used for Template with no title is “YYYY/ MM/DD hh:mm” (Y = year, M = month, D = day, h = hour, m = minute). z You may not be able to download data depending on sites or the file size.
Using Location Information Select a link with location information added on a site, use the location information. screen (p.136) Select a link with 1 Sites location information added Select any item: Font size (default: Standard)……Selects the character size of the detail screen for a screen memo, MessageR/F or a page on a site, from “Small/Standard/Large/X-large”.→p.93 Set image disp.
Setting the connection timeout This option sets time-out duration for which the FOMA terminal automatically stops trying to connect when a site is busy and there is no response. “SETTINGS” “i-mode common 1i set” “Set connection timeout” N z After changing the host, the i-Channel information may not be updated automatically. To receive the latest information, press p to display the channel list screen.
N Setting FirstPass User certificates prove that the user is a proper FOMA service subscriber. Downloaded user certificates are saved on your FOMA card (UIM) and enable you to access client authentication-compliant sites. Connect to the FirstPass Center i-mode/i-motion/i-Channel Follow the procedure below to request and download the user certificate. z You can request a user certificate or download from the FirstPass Center. z User certificates cannot be used with the FOMA card (blue).
Changing the Certificate Host * There is normally no need to change this setting. “” o (Edit) 2 Highlight Enter your security code Select any item: Default URL……Sets the URL of the initial screen for the host. You can enter up to 100 single-byte characters. Host number……Sets the host number. You can enter up to 99 single-byte characters. 3 Set the respective items o (Finish) N z To change a stored “User setting host”, use the same procedure for storing.
Saving i-motion Downloading i-motion screen (p.136) Select i-motion 1 Sites When data downloading is completed, the “Data acquisition” screen appears. ■ To cancel downloading t “Play” 2 The downloaded i-motion is acquisition screen (p.152) 1 Data “Save” “YES” played. “Operations on the Music Player” screen → p.278 ■ To cancel the saving “NO” Returns to the data acquisition screen without saving the i-motion. Data acquisition Function menu p.
settings screen (p.148) 1 i-mode “i-motion auto-replay” Select any item: ON (default)……Automatically plays the i-motion after downloading. Some i-motion is played while downloading. OFF……Displays the data acquisition screen without playing the i-motion automatically after downloading. ● Ticker on the standby screen If you have subscribed to i-Channel, the information is displayed on the standby screen as a ticker when the information is received.
N z When information is received, the ring tone will not sound, and the vibrator does not vibrate. Also, the illumination does not flash. Channel list screen (p.153) Add shortcut →p.94 Replay……Displays the channel list screen from the beginning. Sound effect……Sets whether to play the sound effect of the channel list screen or not (ON/OFF). Window Open new window……“Using multi window” → p.140 Close window……Closes the displayed i-Channel window.
Mail What is i-mode Mail? ...................................................................................................... ■ Composing i-mode mail/Deco-mail® 156 Composing and Sending i-mode Mail......................................... Compose message/Send Composing Deco-mail® ...................................................................................................... Deco-mail® Using Templates to Create Deco-mail®...........................................................................
What is i-mode Mail? Subscribing to i-mode enables you to send and receive e-mail messages via the Internet not only between i-mode terminals. In addition to the message body, you can attach up to 10 files (pictures, videos, etc.) within the total of 2M bytes. As the FOMA terminal is compatible with Deco-mail®, you can send expressive mail by changing font color, size, or background color of the message body or using Deco-mail® pictographs.
● Entering Deco-mail® pictographs N Deco-mail® pictograph is an image which fulfills certain conditions including moving pictograph. On the SO706i, you can enter Deco-mail® pictograph in the mail message easily because Deco-mail® pictograph entry is arranged by the categories. z You can download Deco-mail® pictograph from websites, in addition to the pre-installed Deco-mail® pictograph. → p.144 z Mails with Deco-mail® pictographs are handled as Deco-mail®.
Add signature……Pastes your signature into the i-mode mail message. Erase message……Erases the message body in the current i-mode mail message. Delete……Deletes the current i-mode mail message. ■ Decorating the entered text Select from the decoration menu, specify the text you want to decorate and select decorating menu. The specified text is decorated. u (Exit) to end the decoration 2 Press menu N N
Menu Description Using Templates to Create Deco-mail® Selects the character alignment position from / / (Left/Center/ Right). *1 Inserts a line. *1 Changes the background color of the message. Select the background color from the pallet in the same way as the character color. Return the entered character or message decoration 1 step back. *1 Decorates the entered characters, or sets/ releases the decoration. *2 Releases the decoration. *1 Releases all the decoration.
Saving a template You can save Deco-mail® you compose as Template. z You can save up to 500 Templates. z If the message has any attached file other than inserted images, the file is deleted. z Template is saved in “Template” in the Mail menu. New mail screen 1 Message-decorated u (FUNC) “Template” “Save template” “YES” N z The subject of the message being composed is used as Template title. If no subject is entered, “YYYY/MM/ DD hh:mm” is used as the title (Y: year, M: month, D: day, h: hour, m: minute).
■ To send an image to a mova terminal as i-shot You can send a mail attached with an image to a mova terminal as i-shot. When you send a mail to a mova terminal, you can attach only 1 JPEG image. If you attach a GIF image downloaded from sites, etc., the attached file is deleted and only the message reaches the recipient. When you send mail to a mova terminal, unless the recipient has set the incoming message length, he or she can only receive a message up to 184 double-byte characters (369 bytes) long.
N z When 2in1 is in B mode, you cannot display the Draft mail list screen. Draft mail list screen (p.161) List setting……Selects a mail-list format from “Subject/ Name/Address”. iC transmission →p.259 “” 3 Highlight Enter the mail address o (Edit) To store more e-mail addresses, repeat step 3. Mail member list screen (p.162) Compose message……Composes an i-mode mail message with the members of the mail member pasted into the recipients field.
z“ ” flashes while receiving a mail and “ ” stops flashing and lights up when the reception is finished. z“ ” or “ ” flashes while receiving a Message. z If you receive i-mode mail from a terminal capable of specifying “To”, “Cc” and “Bcc” recipients, refer to the mail detail screen to see whether your own address is in the “To”, “Cc” or “Bcc” field.→pp.
: ToruCa attached Receiving i-mode Mail Selectively You can check the subject of i-mode mail kept at the i-mode Center, then select the mail to receive or delete the mail at the i-mode Center without receiving. z To use this function, set “Receive option setting” to “ON” beforehand. When set to “ON”, you cannot receive i-mode mail automatically. When mail arrives A message appears saying that mail is kept at the i-mode Center, and “ ” icon is displayed at the top of the screen.
(1 second or longer) 1u The check new messages screen appears. You can also check new messages by following procedures. • o “Check new messages” • u “Check new messages” ■ To cancel the inquiry p (Quit) or t (1 second or longer) during the inquiry A message may be received depending on the timing of the cancellation.
Adding Mail Addresses to Phonebook You can add the e-mail address or phone number of the sender of received mail to your phonebook. z For the received SMS message, the sender’s phone number is stored in the Phonebook as a phone number. mail detail screen (pp.
Saving images You can save images ( ) attached to or pasted into received i-mode mail. Saving the inserted image → p.176 mail detail screen (pp.170, 1 Received 172) Move the frame to the image ■ To change image display to file name display Select an image To return to the image display, select the file name. “YES” Select an item 2 ■ When you do not set the image to the • Documents can only be saved to a microSD card.
Having the FOMA Terminal Read Out Mail z The voice may be heard by others while reading out, so move to an area where it will not disturb other people. z The FOMA terminal reads out at the volume level set in “Phone” in “Ring volume”. When set to “Silent” or “Step”, messages are read out at the “Level 2” volume.
■Amount of money If a currency symbol (e.g. “￥” (single-byte or doublebyte)) is placed at the beginning of a number up to 16 digits long, the FOMA terminal reads out the number as amount of money. If commas (,) are used as a delimiting character in an input string, the FOMA will recognize the string as amount of money only if the commas are used every 3 digits.
recommended to ask people you frequently correspond to follow the following guidelines: • Create message using katakana for nouns, especially and proper nouns such as geographic names and personal names. • Create message using punctuation marks. Displaying Mail in the Inbox and Outbox z The FOMA terminal can store up to 500 received i-mode mail and SMS in total and up to 400 sent i-mode mail and SMS in total. z You can protect up to 500 received mails and 250 sent mails.
N Guide to the mail list screens z You can also change the display mode by selecting “List setting” from the function menu of the mail list screen, then selecting “Subject”, “Name”, or “Address”. z The part of Subject/Name/Address may not be displayed properly.
Icon Description SMS with SMS report received Area Mail * Mail to Address B of 2in1 Time-adjusted mail Mail with an attached or pasted melody Mail with attached or inserted images N z When you view i-mode mail with an attached image in the received mail detail screen, the screen switches between image display and file name display each time you move the frame to the image and press d (Select). On the sent mail detail screen, selecting file name display displays images.
⑦ Recipient and recipient type (Sent mail) Icon Description The name, e-mail address of the recipient and the recipient type→p.157 : Failed to send ⑧ Recipient and recipient type of broadcast mail (Received mail) Up to 4 recipients can be displayed. Icon Description The names, e-mail addresses of the recipients except yourself and the recipient type for broadcast mail→ p.157 : Cannot reply-to Add folder……Adds a folder and set the Auto-sort for the new folder.
N z You cannot delete an i-αppli mail folder if there is a corresponding mail-linked i-αppli. You can delete an iαppli mail folder if there is no corresponding software, but the folder created in the Inbox folder screen or Outbox folder screen is also deleted. z If you delete a folder that is specified in the “Auto-sort” settings, the automatic sorting setting for that folder is also canceled. z The following i-mode mail or SMS messages will not be deleted.
N z You cannot use this option to sort SMS reports or SMS received directly to the FOMA card (UIM). z “Sort all” can only be set for 1 i-αppli mail folder for received and sent i-αppli mail respectively. Mail list screen (pp.170, 171) Reply*1 → p.165 Edit*2……Edits the recipient, subject or message body of the sent mail. Press o (Send) to send the mail. Move……Selects from “Move this/Move selected/Move all” and moves the mail to the other folder you select. “About multiple-choice”→ p.
N z A mail that is not displayed by the setting of 2in1 is not targeted for setting of “Protect all” nor “Unprotect all” even if either of them is selected. z A mail that is not displayed by the setting of 2in1 is not targeted for setting of “Keep all” nor “Put out all” even if either of them is selected. ● Storing mails at the Data Security Center You can store i-mode mails and SMS stored in the FOMA terminal at the Data Security Center.
N Using Mail Records When you send or receive mail, the mail addresses are recorded in the Sent address list or Received address list. You can send mail by selecting an address from these address lists. z Up to 30 i-mode mail address or SMS phone number entries can be stored in the respective Sent address and Received address lists. However, up to 60 received addresses can be stored if you use 2in1.
Setting up the FOMA Terminal Mail Functions “Mail settings” 1u The “Mail Setting” screen Prefer attachment (default: all selected)……Selects the attached file type to receive at the time you receive the mail from “Image/i-motion/Melody/PDF/ ToruCa/Tool data (Phonebook, Schedule, Bookmark)/Other (including documents)”. “About multiple-choice” → p.38 Read out setting appears. Select voice (default: Female 1)……Sets the type of voice used for reading out mail.
N z This option applies to i-mode mail only. SMS, MessageR/F are received automatically regardless of this setting. z To check the contents of the file, you have to download the file manually afterwards.→p.166 z When “Other” is deselected, documents are not received. Editing Headers, Signatures and Quotation Marks By storing your header or signature, you can automatically paste it into an i-mode message.
How to view the MessageR/F screens 1 ＭｅｓｓａｇｅＲ 3 4 ＭｅｓｓａｇｅＲ １／ １２ ２００８／ ８／ １ ７：０６ グルメ情報 １／ ３ ７：０６ グルメ情報 ７／３０ ホテル情報 ７／２７ 天気予報 ７／２２ 峠の天気 ７／１８ 交通情報 ７／１１ 映画館案内 2 2 渋谷のフランス料理店「○ ○○○○」では、今週１週 間は１周年記念として朝食 を毎日８時からご提供。 コーヒーおかわり自由。 −−−−ＥＮＤ−−−− List (2-line display) Detail ① Message status Icon Viewing Messages in the Message Box z When a MessageR/F from the i-mode Center arrives on the FOMA terminal, the “ ” or “ ” icon appears at the top of the screen.
N z The sort display and filter function can be used together. For example, if you want to display the unread messages in chronological order, select “Chronological ↓” in the sort menu, then select “Unread” in the filter menu. z When you exit from the MessageR/F list screen, the sort and filter are canceled. Message detail screen (p.180) Add to phonebook……Adds the phone number and e-mail address displayed on MessageR/F to the phonebook.→ p.
N z The volume of the ring tone is set to the same volume set at “Mail” of “Ring volume”. z The description screen or “Receive Area Mail” screen may not appear when you receive the Area Mail during using functions such as an i-αppli or the camera. If an earthquake early warning is received, the vibrator always works regardless of the manner mode setting. Setting Early Warning “Area Mail” Make the settings for receiving Area Mail. Setting screen (p.
N z You cannot send SMS to the entered address when: • The address contains the characters other than numbers, “*” or “#” • The address contains “+” except for the head of the address • The address contains a space z Depending on the signal quality, types of characters or device of the other party, the recipient may not be able to display the text correctly. z Even when “Caller ID Notification” is set to “OFF”, your caller ID is provided to the recipient during SMS transmission.
Checking for SMS The SMS that are not received by the FOMA terminal are kept at the SMS Center. You can receive the kept SMS by checking new SMS. z SMS are kept in the following cases: • When the FOMA terminal is turned off • When “ ” is displayed • When the Inbox is full • When Self mode is set “Check new SMS” 1u “SMS Checking” appears while you check for new SMS. Press d (Select) after checking for new SMS. The automatic receiving starts if the center keeps any SMS.
i-αppli What is an i-αppli? .......................................................................................................... Downloading i-αppli from Sites ....................................................................................... Launching an i-αppli ....................................................................................................... Pre-installed Software.....................................................................................................
What is an i-αppli? Downloading an i-αppli from a site enables you to use i-mode terminal in more convenient. Some i-αppli allow you to store data from the i-αppli directly into the phonebook or your schedule, and Some i-αppli linked to Data box allow you to save or download images. As the FOMA terminal supports mega i-αppli with large capacity, you can enjoy high-resolution 3D games or long roll-playing games. z For details on i-αppli, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
N Launching an i-αppli Launching an i-αppli (1 second or longer) 1o The “Software list” screen appears at the bottom of the screen. ■ To search i-αppli by i-mode “Search by i-mode” “YES” Software list Function menu p.188 software 2 Select When you launch the software, “ ” or “ ” appears at the bottom of the screen. Pre-installed software → p.190 (1 second or longer) or y 1t “YES” N z If you receive a voice or videophone call while i-αppli is active, the software is paused.
Software list screen (p.187)/ IC card content screen (p.202) Move to microSD……Moves one i-αppli or i-αppli data in the FOMA terminal to the microSD card. “Displaying the i-αppli data in the microSD card” →p.199 Software setting……Specifies the software settings. Press o (Finish) to finish the setting operation. Memory info……Displays the amount of the stored i-αppli. Stand-by display → p.198 Network set……Sets whether to communicate when an i-αppli is launched.
N Checking the information of i-αppli z When deleting a mail-linked i-αppli, a message appears asking if you also delete the corresponding dedicated folder for the mail-linked i-αppli. Select “NO” to delete only the software and select “YES” to delete the folder at the same time. However, even when you select “YES”, you cannot delete the folder dedicated for the mail-linked i-αppli if it is being used, if the folder is locked, or if the folder contains a protected mail.
Security error history screen (p.189) Copy info……Copies the security error details. Delete info……Deletes the security error details. Launching software from active software Activate software from the currently active software. Downloading software that launches the specified software enables you to launch that software without returning to the software list screen. z If the software to be launched is not specified, specify the software.
● Basic service and additional service This software provides the basic service and additional service. Menu Description エクストラ (Extra) • Change the map mode to the normal map, moving map by waving the FOMA terminal, 3D map, trainroute-emphasized map, etc. • Show colored views of previously Open i-area-positioned locations in the unit of city, town, village, ward and prefecture. • Back up information on previously Open i-areapositioned locations to the server.
● Map view and operations ● Screen and operation for the search result for surrounding area information ■Map view z The screens shown here are for reference only and may look different from the actual screens. z The screen and operation are provided when the search result is displayed with the map but not provided as a result of selection from the list. ■Search result screen for surrounding area information ©2008 ZENRIN DataCom CO., LTD.
地図上で指定 (From map)……Sets the starting location with map. TEL／〒検索 (By number/code)……Searches by phone number or zip code. 住所一覧から (From address list)……Selects an address. ジャンルから (From genre)……Selects a category. 履歴から (From history)……Selects from previously viewed maps. 登録地点から (From marked point)……Sets from the location information stored in this software or the server. 自宅 (Home)……Sets location information on your home. 出発地の確認 (Check)……Checks information on the starting location.
is recognized and a confirmation 3 Voice screen appears ■ When recognition is incorrect “ 音声再入力 ” (Retry) ● Using 設定/ヘルプ (Setting/Help) TOP menu screen (p.191) “設定/ヘル 1 プ” (Setting/Help) Select any item: 各種設定 (Settings)……Make the basic settings/ route guide settings/home settings/station settings, delete history and reset the settings. ヘルプ・規約 (Help/Terms)……Shows usage, FAQ and terms of service. i-αppli 会員情報確認 (Membership information)…… Checks your subscription state to “ ゼンリン 地図 ＋ナビ ” (ZENRIN Map+Navi).
z Timer recording After initial settings completes, specify the program and select リモート録画予約 (Online timer recording) from the menu. You can connect to the DVD player set with this application and set the timer recording. * If a timer recording is already set for the time you set, a message appears on the program guide. z You are charged for the packet communication. N z Not available when 2in1 is in B mode. z NTT DOCOMO accepts no liability whatsoever regarding the information set on the FOMA terminal.
N z When you launch this application for the first time, agree with “ご利用上の注意” (Notes on using the application). z Packet communication charges are applied for settings or operations. ■ Notes on Osaifu-Keitai i-αppli z NTT DOCOMO accepts no liability whatsoever regarding the information set on the IC card. ｉアプリバンキング (i-αppli banking) i-αppli This i-αppli enables you to conveniently use mobile banking.
3 o (Finish) Launching i-αppli Automatically You can set the software to launch automatically at the specified date and time or interval of time. Enabling automatic launching z You can set 3 automatic startup times for each application. z Set to “OFF” at the time of purchase. 1 i “I-APPLI” “Auto-start set” “ON” or “OFF” Setting the launch date/time list screen (p.
Launching i-αppli from a site When an i-αppli software launch specification is displayed on an i-mode site, this setting allows the software to be launched from the site. z This function cannot be used with some sites. screen (p.136) Select an item for 1 Sites launching the software “YES” N z Unlike ordinary i-αppli, some i-αppli software is immediately launched from an i-mode site.
Deactivating the i-αppli standby screen N z No information is recorded if the i-αppli standby screen ends normally (at normal exit). ● Deactivating the i-αppli standby screen while running an i-αppli running an i-αppli t (1 1 While second or longer) or y Select any Upgrading i-αppli item: Cancel……Returns to the screen of running the i-αppli standby screen. End……Returns to the i-αppli standby screen. Terminate……Deactivates the setting of the i-αppli standby screen.
N z When i-αppli that is stored on the microSD card is moved to the FOMA terminal (Phone), the data of i-αppli that is stored on the microSD card is also moved to the FOMA terminal (Phone). z Use “Software info” (p.189) to check whether the i-αppli can be moved to the FOMA terminal (Phone) from the microSD card. Displaying the i-αppli data in the microSD card You can display the folder name list of the i-αppli data (microSD) stored on the microSD card.
Osaifu-Keitai/ToruCa What is Osaifu-Keitai? .................................................................................................... What is iC Transfer Service? .......................................................................................... Launching Osaifu-Keitai i-αppli ....................................................................................... Checking the IC Card Owner Information ................................................ Check IC owner What is ToruCa? ........
What is Osaifu-Keitai? Hold the “Osaifu-Keitai” up to a reader/writer at a member store and pay for your shopping, or utilize as membership card, coupons, and more. You can also use the i-mode network to add e-money credit, check balances and usage history. Enough security is provided so the Osaifu-Keitai can be used without worries. z For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
N z When 2in1 is set to B mode, you cannot launch an i-αppli which uses the mail function. Using the Osaifu-Keitai By holding the FeliCa mark “e” on the FOMA terminal over the reader/writer unit, you can pay with the electronic cash or use the FOMA terminal as a ticket. These functions can be used without launching the software. z Though you cannot launch the Osaifu-Keitai i-αppli during a call, you can use the Osaifu-Keitai by holding the FeliCa mark over the reader/writer unit.
How to acquire ToruCa External memory (microSD card) Reader unit Viewing ToruCa “OSAIFU-KEITAI” 1i The “ToruCa folder list” “ToruCa” screen appears. Mail Infrared data exchange iC communication Exchanging ToruCa between i-mode terminals QR code ToruCa folder list Function menu p.205 a folder Select ToruCa 2 Select The “ToruCa display” screen appears.
N z You may not be able to use the Phone To/AV Phone To, Mail To, Web To or i-αppli To function depending on ToruCa. ToruCa folder list screen (p.204) Add folder……Enters a folder name to add a folder. You can add up to 20 folders on the FOMA terminal. For the folders on the FOMA terminal, you can enter up to 10 double-byte or 20 single-byte characters, and for the folder on the microSD card, you can enter up to 31 double-byte or 63 single-byte characters.
*2: Unavailable in the “microSD” folder. *3: Available only for ToruCa stored on the microSD card. *4: Available only when ToruCa (detail) stored on the FOMA terminal is displayed. Setting Illumination for IC Card Function N z You may not be able to copy ToruCa, perform attaching ToruCa to mail, iC transmission, Send Ir data, copying to the microSD card or updating depending on ToruCa. Making the ToruCa Settings Turn on/off the illumination for IC card function.
1seg What is 1seg? ................................................................................................................. Setting Channels ..................................................................................... Channel setting Watching 1seg Programs............................................................................... Active 1Seg Using G-GUIDE EPG Remote Control ............................... G-GUIDE EPG Remote Control Using Data Broadcasting ..............................
What is 1seg? 1seg is a mobile digital terrestrial audio/video and data broadcasting service. Use i-mode to get detailed program information, join a quiz show, enjoy TV shopping, etc. For 1seg service details, visit the following website: The Association for Promotion of Digital Broadcasting (Dpa) PC: http://www.dpa.or.jp/english/index.html i-mode: http://www.dpa.or.jp/1seg/k/ (Japanese) ● Using 1seg z 1seg service is provided by TV broadcast station, etc.
Before use Setting Channels ● View procedure Step 1 Set channels→ p.209 Register channels for the area and set a list. Step 2 View 1seg →p.210 ■When a call, etc. arrives while watching or recording When one of the following arrives while watching or recording, video and audio are interrupted and each function activates (Recording is not interrupted). Watching can be resumed after each function is finished.
N channel list 2 Select Channel list is set, and the z G-GUIDE EPG Remote Control, channel link displayed on a site or mail message, etc. are also available to activate 1seg. “Media To function”→ p.147 “Channel info” screen appears. Guide to the 1seg screen ① ⑦ テレビ×× Channel info ② Function menu p.210 Channel list screen (p.209) Channel setting→p.209 Edit title……Edit channel list title. ③ 涼やかな風鈴の音色が響い ています。 ④ ■○○ニュース 今年の冬は厳しい寒さにな ■今日の天気 東京：晴 ⑤ ⑥ Delete this……Delete the channel list.
⑬ Mail ticker Ticker displays information on i-mode mail, SMS, Area Mail and MessageR/F received while viewing 1seg. Operations available while viewing 1seg z Some key operations are not available in data broadcast mode. Key Action v Forward channel selection 0 to 9 wq One-touch channel selection Press keys corresponding to channels from 1 to 12. v (1 second or longer) Channel search Searches for receivable channels in frequency order. To interrupt search, press o or t. 1seg screen (p.
Select service……Select service to view when multiple services (programs) are broadcast from the same channel. Add channel……Add currently viewed channel to channel list. Data broadcast TV link list……Display the TV link list screen. → p.213 Re-read……Reload the displayed data broadcast site. Show certificate……Display certificate used on SSL communication. →p.149 Back to data BC……End viewing data broadcast site and return to data broadcast. Data BC settings Set image disp.
Using TV Link Sites or memos can be added to TV link depending on data broadcast/data broadcast site. Add to TV link to view often-used sites or memos easily. If selected item (link) can be added to TV link, a message appears asking whether to add to TV link. z Up to 50 entries can be added. On the 1seg screen (data broadcast mode) (p.212) Select available item “YES” ■ If selected URL or memo is already added A message appears asking whether to overwrite the existing one.
N
● When recording is finished “ ” appears on the standby screen. Select “ ” to view up to 100 results from the latest. Select recording result to play recorded program. N z If multiple alarm entries are added for the same date and time, priority is given to an entry with earlier start date and time. If the same start date and time is set, priority is given to an entry added later. z To set alarm illumination, go to “Illumination set” then “Schedule/Alarm”.
N z If set to “ON”, data broadcast site information may automatically update and packet communications charges may apply even when the FOMA terminal is closed. z When activating the view style in ECO mode, cache data broadcast site data will be cleared. z 1seg activation confirmation screen (p.208) is not reset. z Even if set to “Show temporarily”, an icon may appear in a weak signal location.
Full Browser Displaying Website Designed for PC ............................................................ Full Browser Setting the Full Browser.................................................................... Full Browser settings Cookie............................................................................................................................. Referer ............................................................................................................................
Displaying Website Designed for PC You can enjoy viewing websites designed for PC with the Full Browser function. Some websites incompatible with i-mode can be displayed correctly. z Some websites may not be displayed or be displayed incorrectly. z Note that the communication charge can become expensive if large volumes of data is acquired by viewing websites containing many image data or downloading files.
③ Change window icon Pressing o ( ) switches pages when multiple websites are open. ④ or Appears during connection to the Internet with Full Browser. (Displays “ ” when Mobile layout mode is used) Operations on the Full Browser screen ● Scrolling Key Scrolls to the direction that the key is pressed. Holding the key scrolls the screen continuously in the same direction. a (▲マナー ) s (▼メモ) Scrolls up or down by screens.
● Displaying a page composed of frames You can view websites composed of frames that are designed for PC. 1 Full Browser screen (p.218) Display a website composed of frames XXXXXXXX XXXXXX XXXXX XX XXX XXXXX XXXX XX XXXX ●XXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXX ●XXXX XXXXXXXXXXXXXXXXXXX XXXXXXXXXXX ＜ XX XXXX ＞ ・XXXXXXXXXXXXXXXXXXX XXXXXXXXXX XXX XXX XXX XXXX a frame 2 Select The selected frame is displayed.
Certificate……Displays the SSL/TLS certificate details when the displayed website supports SSL/ TLS. Browser settings Replay……Plays an animation in the displayed website from the beginning. Set image disp. (default: ON)……Sets whether to display images. When “OFF” is set, “ ” appears instead of images. Referer setting (default: Send)→ p.222 Cookie settings (default: Valid) →p.222 Delete cookies→ p.222 Change CHR code……Changes the character code to redisplay a website that is not displayed correctly.
Setting Cookie “Full Browser” “Full Browser 1o settings” “Cookie settings” Select any item: Valid……Always validates Cookie. No confirmation is made when Cookie is sent or received. Invalid……Always invalidates Cookie. Notify (sending)……Enables you to choose whether to send Cookie every time you connect to a page. No confirmation is made when Cookie is received and the information is saved in your FOMA terminal. You can set whether to send Referer*. * : Referer is information of source link.
Data Display/Edit/Management Data Box ......................................................................................................................... 224 ■ Mastering still images Displaying the Stored Images .......................................................................... My picture 225 Editing Images ................................................................................................ Edit image 231 ■ Mastering movies Playing Movies/i-motion ...............................
Data Box micro SD Folder Picture In Data Box, still images and movies shot using the FOMA terminal’s camera or data downloaded from mails or websites are saved. Decorate PI*2 ■Folders z The following items and folders are prepared and you can categorize the data into the folders depending on the file type.
Folder Secret*3 User-created folder*4 micro SD Video*5 SD Multimedia*6 Movable contents Playlist Melody Inbox Pre-installed User-created folder*4 Voice announce microSD Playlist My document Inbox You can select this folder to save melodies retrieved from websites, mails or Bar code reader. Melodies copied from the microSD card or forwarded by infrared data exchange are automatically saved to this folder. Melodies and sound effect are preinstalled.
● Guide to the 9 images view/list view an image 3 Select The “My picture” screen appears. Use v to display the previous or next image. ■ To switch the screen mode p (Normal/Full) In the Full screen mode, the oblong image is displayed just as it is, and rectangular image rotates to the right 90 degrees and displayed. Image type icon Title Image type icon Retrieval method icon Retrieval method icon Ｃａｍｅｒａ １／２ Allowable operation icon p Function menu p.
: Data that are file-restricted or not allowed to be attached to mails or output from the FOMA terminal : i-motion with playback restriction (“ ” turns to “ ” when the playback count, period or limit expires) : Movable only when the FOMA card being used was also used to save the i-motion : Movable only when the model and FOMA card being used were also used to save the i-motion ■Retrieval method icon Icon No icon Description Pre-installed data Data downloaded from site, mail, ToruCa or retrieved from i-αppl
Folder Kisekae Tool − 1Seg Image Video Document viewer microSD File format UCM, UCP JPEG MPEG2-TS Word, Excel, PowerPoint ■Titles and file names • Still images or movies you shot are automatically titled and named. : yyyy/mm/dd hh:mm (Year/Month/Day Time*) Title File name : yyyymmddhhmmxxx Date and time* (3-digit number is added in the xxx part for still image) * : The time when the still image is saved or when the movie shooting is finished is used.
Delete*1……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice”→ p.38 Delete this*3……Deletes one image. Keep in secret⇔Put out*1*4……“Preventing Others from Viewing Data”→p.104 Copy to Phone*5 →p.249 DPOF setting*5 →p.252 Copy*1*5……“Copying the data to the different folder in the microSD card”→p.250 *1: Available only with the Image list screen. *2: Not available when 2in1 is in B mode. *3: Available only with the My picture screen.
● Attaching or inserting image to compose an i-mode mail or Deco-mail® ● Making a composite image from 4 images You can attach the saved still image to an i-mode mail message or insert it in a Deco-mail® message. z You cannot specify images larger than 352 dots wide × 288 dots high or 288 dots wide × 352 dots high, except the following: • VGA (640 × 480), VGA V. (480 × 640) • Screen (240 × 427) • CIF V. (288 × 352) • QVGA V. (240 × 320) list screen (p.
4 o (Finish) Editing Images Original animation list screen (p.230) Edit title……Edits the title of the original animation. You can enter up to 9 double-byte or 18 single-byte characters. Org. animation……Newly creates Original animation when “” is highlighted. Edits the original animation when the existing one is highlighted. Display image……Plays the original animation (Displays the original animation playback screen). Set as display……Selects the item to which the original animation is set.
Trim away……Trim a constant size. Select the image size for trimming position to trim with b d (Set) ● Pasting image stamps Adjust the Brightness……Selects the brightness in 5 levels from “-2 to ± 0 to +2” using v. Rotate……Selects the angle to rotate the image from “90° to right/90° to left/180°”. Change size……Selects the image size for changing. The image is enlarged or reduced to fit in the selected size keeping the aspect ratio.
N Playing Movies/i-motion You can play movies you have shot and i-motion downloaded from i-mode sites or websites. z For some i-motion, you can also select a chapter to play. Guide to the preview/list view “DATA BOX” “i-motion” 1i The “Folder list” screen • The icons for image types, retrieval methods and the available settings → p.226 • Titles and file names → p.228 appears. i-motion folder → p.224 Image type Image type Retrieval method icon Retrieval method icon Ｃａｍｅｒａ Function menu p.
Copy to microSD→ p.248 Move to microSD→p.250 Move……Selects from “Move this/Move selected/Move all” and moves the movie to the other folder you select. “About multiple-choice” →p.38 Add shortcut →p.94 Edit file name……Edits the file name of the movie. You can enter up to 36 single-byte alphanumeric characters and symbols (“-” and “_” only). File restriction……Specifies whether to allow the redistribution of the saved movie. “File restriction”→p.228 Reset title……Resets the title to the default.
Playlist folder list screen (p.234) Edit playlist……Starts editing the playlist. You can edit a playlist which is already set. Release playlist……Deletes the set movies and releases a playlist. d (Stop) when it is the last 3 Press frame you want to trim o (End) ■ When you select “500KB” Trimming automatically stops once the trimmed size reaches 500K bytes. trimmed section of the movie is 4 The played The playback stops automatically when it ends.
Guide to the preview/list view Guide to the video player screen z Image type icons and retrieval method icons → p.226 z Titles and file names→ p.
Operation during video playback Key press Operation d Switch screen directions 9 (1 second or longer) In order of “Portrait” → “Wide (90° right)” → “Wide (90° left)” o Pause/Resume playback p Mute c (a (▲マナー )/ s (▼メモ)) Adjust volume j Return to fast forward/ normal playback at 1.3× (During pause) Frame forward h Return to fast forward/ normal playback at 1.
Using Chara-den characters This function allows you to play a Chara-den character by selecting from pre-installed actions. player screen (p.237) 1 Chara-den Using Chara-den characters ■ To check the action list ■ To have the character’s mouth synchronize your voice Some Chara-den characters can move the mouth synchronizing your voice as if it is talking.
● Shooting Still Images Saving Chara-den character as Image or Movie player screen (p.237) 1 Chara-den u (FUNC) “Rec. Chara-den” The “Rec. Chara-den (image)” screen appears. ■Guide to the Rec. Chara-den screen an action 2 Perform d (Record) 8 3 2 1 7 Photo mode Operation of actions → p.238 8 6 2 1 4 9 7 Movie mode Rec. Chara-den (image) Function menu p.
N N z The image size (QCIF (176 × 144)) cannot be changed. z Performing an action during shooting may record keypad sounds. z Changing a Chara-den character sets the action mode to Whole. Rec. Chara-den screen (p.239) Switch Chara-den……Changes a Chara-den character to shoot. Substitute image……Sets the Chara-den character as the substitute image for videophone calls. Action List……Displays the Action list. Change Action……Changes the Action mode. Set image disp.
Guide to the Melody list Melody type icon Retrieval method icon １／２ Ｉｎｂｏｘ Ｅｖｅｎｉｎｇ ｉｎ Ｈｏｎｏｌｕｌ Ｔｈｅｍｅ ｓｏｎｇ Ａｍｅｒｉｃａｎ ｒｏｃｋ Ｓｏｕｎｄｔｒａｃｋ Ｈｉｔ ｔｕｎｅ ＭＹ＆Ｋ Ａｎｉｍａｔｉｏｎ Ｒａｃｅ Ｎｏｓｔａｌｇｉｃ ｍｅｌｏｄｙ Ｉｎｔｒｏｄｕｃｔｉｏｎ ｍｕｓｉｃ Ｍｕｓｉｃ ｆｏｒ ａｄｖｅｒｔｉｓ Allowable operation icon Description MFi/SMF melody : Data that are file-restricted or not allowed to be attached to mails or output from the FOMA terminal ■Retrieval method icon Icon No icon Description Operation v Plays the previous or next melody f (a(▲マナー )), g (s (▼メモ)) Adjusting th
Sort*1……Sorts melodies in a selected criteria. Move*1……Selects from “Move this/Move selected/Move all” and moves the melody to the other folder you select. “About multiple-choice” → p.38 Delete*1……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice” → p.38 *1: Available only with the melody list screen. *2: Available only with the melody screen. *3: Not available when 2in1 is in B mode. *4: Available only for melodies stored on the microSD card.
Guide to the package list Sort……Sorts packages by the specified criteria. Package type icon Ｋｉｓｅｋａｅ Ｔｏｏｌ Ｄｏｗｎｌｏａｄ２ Ｄｏｗｎｌｏａｄ１ タ゛イレクトメニュー ミッフィー Ｓｅａｒｃｈ ｂｙ ｉｰｍｏｄｅ Title Allowable operation icon microSD Card Description All the data have been downloaded Only a part of the data has been downloaded Subject to the FOMA card security function ■Retrieval method icon Icon No icon Delete……Selects the deleting method from “Delete this/ Delete selected/Delete all”. “About multiple-choice” → p.
Inserting/removing the microSD card Insert or remove the microSD card after turning off the FOMA terminal. 1 Open the cap of the microSD card slot the microSD card into the 2 Insert microSD card slot and push it until it locks into the place Insert the microSD card straight and slowly with the printed side up. When fully inserted, the card is locked in the place.
(Table 1) Folder tree on the microSD Card and storage file (Enclosed in parentheses are file extensions) Root (microSD card) DCIM ････････････････････････････････ Images. Appears as “Picture” under “My picture” on the FOMA terminal. aaaSODCF DSCbbbbb.hhh ・ ・ ･･････････････････Images (hhh: JPEG (JPG), GIF) SD_VIDEO ･･･････････････････････････ Movies, i-motion and 1seg videos. PRLccc･･･････････････････････････ In “i-motion” – “SD-Video” on the FOMA terminal. MOLccc.
● Number of files that can be stored on the microSD card The number of files that can be stored on the microSD card varies depending on the memory capacity of the microSD card.
Displaying the Data in the microSD Card N z Deco-mail® appears without decorations. Categories screen (p.247) Displaying the PIM data on the microSD card You can display the PIM data such as phonebook, schedule, mail or bookmarks on the microSD card. “LIFEKIT” “microSD manager” 1i The “Categories” screen appears. microSD info→p.251 Copy from phone……Copies all the item data to the microSD card. • For “Schedule”, you can select from “Schedule/To Do list/All”.
2 Select a folder File list screen (p.247) Edit title……Edits the file title. You can enter up to 15 double-byte or 31 single-byte characters. Copy & add・Copy & overwrite → p.249 Copy from phone……Copies all the item data to the microSD card. • For “Schedule”, you can select from “Schedule/To Do list/All”. • For “Bookmark”, you can select from “i-mode brow./Full Brow./All”. microSD info……Displays the amount of available space and data stored on the microSD card.
● Copying the data such as images to the microSD card You can copy the data in the Inbox, Camera or user created folder to the microSD card. z Still images recorded with 1seg cannot be copied. screen of the data (such as the 1 List image list screen) u (FUNC) “Copy to microSD” Select any item: Copy this・Copy selected・Copy all……Selects the copying method, then selects the destination folder to copy the data to the folder of microSD card. “About multiple-choice”→p.
● Copying other data to the FOMA terminal You can copy the data such as images stored on the microSD card to the folder of the FOMA terminal. z Videos recorded with 1seg cannot be copied. screen of the data (such as the 1 List image list screen) u (FUNC) “Copy to phone” Select any item: Copy this・Copy selected・Copy all……Selects the copying method. “About multiple-choice”→ p.
