User's Manual

17
Making and Answering Calls
Returning a Call (Outgoing History/
Incoming History)
Example: Returning a call to a phone number in the
incoming history
When the standby screen is displayed, press D.
Press C while the standby screen is displayed to display
the Outgoing History screen.
Use G to select the phone number you want
to call and then press [ (Detail).
Press C to display the Outgoing History screen.
Press Q.
The cell phone can store up to 50 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
What is a One-ring Call?
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
•
➡
•
➡
•
■
One-ring Indicator
indicator on the Incoming History screen indicates you
have received a one-ring call (a call rang for three seconds
or shorter). Be careful when you return a call to an unknown
caller.
Adjusting the Earpiece Volume
during a Call
During a call, use G.
A: Increases the volume.
B: Decreases the volume.
Press [ (OK).
Turning On Manner Mode
When the standby screen is displayed, hold down
H for at least one second.
This turns on manner mode, and displays , and on
the standby screen. This also turns on Answer memo,
which is indicated by
on the standby screen.
Turning Off Manner Mode
When the standby screen is displayed, hold down H for
at least one second.
Turning off manner mode causes
, and to disappear
from the standby screen. Answer memo is also turned off,
which is indicated by
disappearing from the standby
screen.
■
•
•
➡
■