User's Manual

21
Character Input
Entering Two or More Characters
Assigned to the Same Key
After you enter the first character, press C and then enter
the next character.
Deleting Characters
To delete one character at a time, move the cursor to the
character you want to delete and then press R. To delete
all characters to the right of the cursor, hold down R for
at least one second. If there are no characters to the right of
the cursor, holding down R will delete all the characters.
Starting a New Line
Press ;.
Certain functions such as c-mail do not support
entering new lines.
■
■
■
•
Entering E-mail Addresses
E-mail Address Compatible Characters
Before you enter an e-mail address, switch to the
lowercase alphanumeric (single-byte) mode.
When changing your e-mail address, you can enter up
to 30 single-byte alphanumeric and symbol characters
for the account name (part to the left of @). Note the
following:
- Uppercase characters cannot be used.
- Period (.) or zero (0) cannot be used as the first
character.
How to Enter E-mail Addresses
Example: Entering "[e-mail]"
Enter "taro.23".
t : Press 8 once.
a : Press 2 once.
r : Press 7 three times.
o : Press 6 three times.
. : Press 1 once.
2 : Press 2 once and then ;.
3 : Press 3 once and then ;.
Enter "@".
@: Press 1 twice.
Enter "kddi" and then press [ (OK).
k : Press 5 twice.
d : Press 3 once and then C.
d : Press 3 once.
i : Press 4 three times.
■
•
•
■
➡
➡