User's Manual

36
EZ News Flash/au one Gadget
EZ News Flash/au one Gadget
Use the EZ News Flash/au one Gadget to display flash
news, or activate the set gadget on the standby screen.
You can check the news details and other information by
selecting the ticker field.
You can use the EZ News Flash and au one Gadget by
making a few simple settings following the EZweb initial setup.
Basic Operations
The EZ Flash News information is automatically
received at no charge. Note, however, that packet
communication charges may be incurred for manual
updates and connecting to EZweb sites. In this case,
a confirmation screen for network connection is
displayed.
•
Packet communication charges are incurred for using
au one Gadget applications that require network
connection for information updates.
The EZ News Flash information is updated at regular
time intervals.
appears while receiving information.
Setting EZ News Flash
The EZ News Flash is available free of charge. You have
only to make a few simple settings. After following the
procedure in “Initial Setup of E-mail and EZweb” on page
10, configure EZ News Flash settings. If you did not
configure the EZ News Flash settings at the time of the
initial setup, follow the steps below.
When the standby screen is displayed, select the
ticker field and then press [ (OK).
Follow the on-screen instructions.
The setup procedure is completed.
When the standby screen returns, a message asking
you to wait for a while until the next update takes place
appears in the ticker field.
•
•
➡
•
&;XFC4VCTDSJQUJPO3FRVJSFE&;XFC4VCTDSJQUJPO3FRVJSFE
Check the news.
Check the
weather forecast.
Select the ticker field.
Select the info pane.
Select the gadget
setting icon.
Set
au one gadget.
Press A on
the standby
screen.
Check the news.
Check the
weather forecast.
Select the ticker field.
Select the info pane.
Select the gadget
setting icon.
Set
au one gadget.
Press A on
the standby
screen.