English Language Language Language Draft for Sony Ericsson Internal Use Only-PE1 BluetoothTM Headset HBH-PV705
Bluetooth™ Headset HBH-PV705 2 User Guide User Guide User Guide User Guide This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Sony Ericsson HBH-PV705 This manual is published by Sony Ericsson Mobile Communications AB, without any warranty.
Introduction Introduction Introduction Introduction 3 Bluetooth™ headset HBH-PV705 The Bluetooth™ headset HBH-PV705 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. The Bluetooth™ headset HBH-PV705 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile.
Front Front Front Front 4 Indicator light Indicator light Indicator light Indicator light Call handling button Call handling button Call handling button Call handling button Increase volume Increase volume Increase volume Increase volume Decrease volume Decrease volume Decrease volume Decrease volume Draft for Sony Ericsson Internal Use Only-PE1 Charging connector Charging connector Charging connector Charging connector
Back Back Back Back 5 Speaker Speaker Speaker Speaker Microphone Microphone Microphone Microphone Draft for Sony Ericsson Internal Use Only-PE1 Ear hook Ear hook Ear hook Ear hook
User guide symbols User guide symbols User guide symbols User guide symbols Green flash Green flash Green flash Green flash Red flash Red flash Red flash Red flash Steady green light Steady green light Steady green light Steady green light Steady red light Steady red light Steady red light Steady red light Ring signal Ring signal Ring signal Ring signal Beep tone Beep tone Beep tone Beep tone Press and release Press and release Press and release Press and release Press and hold Press and hold Press a
Getting started Getting started Getting started Getting started 7 Compatible chargers Compatible chargers Compatible chargers Compatible chargers CDS-60 CST-61 First time use: Charge approximately 8 hours. First time use: Charge approximately 8 hours. First time use: Charge approximately 8 hours. First time use: Charge approximately 8 hours.
Charging Charging Charging Charging Battery needs charging Battery needs charging Battery needs charging Battery needs charging Fully charged Fully charged Fully charged Fully charged Draft for Sony Ericsson Internal Use Only-PE1 Charging Charging Charging Charging 8
Draft for Sony Ericsson Internal Use Only-PE1 9
Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 15. 4. Prepare your phone according to the phone user guide on how to add a Bluetooth device.
After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone.
After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone.
After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone.
After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Draft for Sony Ericsson Internal Use Only-PE1 The headset beeps and the indicator light flashes green when successfully added.
• A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green. • A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green.
A B (5-8 s) Draft for Sony Ericsson Internal Use Only-PE1 16 (5 s)
Turning the headset on (and off) Turning the headset on (and off) Turning the headset on (and off) Turning the headset on (and off) 17 Off Off Off Off (5 s) (5 s) Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10). Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10). Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10).
Sony Ericsson Mobile Communications AB SE-221 88 Lund, Sweden LZT 108 8620/3 PD1 Printed in XXXX Draft for Sony Ericsson Internal Use Only-PE1 www.sonyericsson.
Left-ear use Left-ear use Left-ear use Left-ear use 19 Draft for Sony Ericsson Internal Use Only-PE1 Putting the headset on Putting the headset on Putting the headset on Putting the headset on
Calling Calling Calling Calling Range Range Range Range Optimal performance Optimal performance Optimal performance Optimal performance Limited performance Limited performance Limited performance Limited performance Draft for Sony Ericsson Internal Use Only-PE1 20
Answering a call Answering a call Answering a call Answering a call 21 Draft for Sony Ericsson Internal Use Only-PE1 Making a call Making a call Making a call Making a call
Rejecting a call Rejecting a call Rejecting a call Rejecting a call 22 Draft for Sony Ericsson Internal Use Only-PE1 Ending a call Ending a call Ending a call Ending a call
Using voice commands Using voice commands Using voice commands Using voice commands 23 Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide.
Draft for Sony Ericsson Internal Use Only-PE1 Making a call using voice commands Making a call using voice commands Making a call using voice commands Making a call using voice commands Make sure that voice commands are enabled and recorded in your phone before you start using them. Make sure that voice commands are enabled and recorded in your phone before you start using them. Make sure that voice commands are enabled and recorded in your phone before you start using them.
Transferring a call Transferring a call Transferring a call Transferring a call To transfer a call from headset to phone, refer to the phone user guide. To transfer a call from headset to phone, refer to the phone user guide. To transfer a call from headset to phone, refer to the phone user guide. To transfer a call from headset to phone, refer to the phone user guide.
Draft for Sony Ericsson Internal Use Only-PE1 Turning the microphone off (and on) during a call Turning the microphone off (and on) during a call Turning the microphone off (and on) during a call Turning the microphone off (and on) during a call
Settings Settings Settings Settings 27 Draft for Sony Ericsson Internal Use Only-PE1 Adjusting ring volume (in standby mode) Adjusting ring volume (in standby mode) Adjusting ring volume (in standby mode) Adjusting ring volume (in standby mode)
Warning! Loud volume could damage your hearing. Warning! Loud volume could damage your hearing. Warning! Loud volume could damage your hearing. Warning! Loud volume could damage your hearing.
Master reset Master reset Master reset Master reset Make sure the headset is turned on (see page 17). Make sure the headset is turned on (see page 17). Make sure the headset is turned on (see page 17). Make sure the headset is turned on (see page 17).
Draft for Sony Ericsson Internal Use Only-PE1 Attaching the strap Attaching the strap Attaching the strap Attaching the strap
Viewing regulatory information Viewing regulatory information Viewing regulatory information Viewing regulatory information 31 Draft for Sony Ericsson Internal Use Only-PE1 xxx xxx xx
Troubleshooting Troubleshooting Troubleshooting Troubleshooting 32 No connection between headset and phone Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to The headset is automatically switched off • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes.
No connection between headset and phone 33 Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnabout • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).
No connection between headset and phone 34 Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnabout • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).
No connection between headset and phone 35 Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnabout • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).
Declaration of conformity 36 We, Sony Ericsson Mobile Communications AB of Nya Vattentornet 221 88 Lund, Sweden declare under our sole responsibility that our product to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60950 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.
