User's Manual
Table Of Contents
- User Guide
- Introduction
- Front
- Back
- User guide symbols
- Getting started
- Compatible chargers
- Charging
- Adding the headset to the phone (pairing)
- Preparing the headset
- Turning the headset on (and off)
- Putting the headset on
- Calling
- Range
- Making a call
- Answering a call
- Ending a call
- Rejecting a call
- Using voice commands
- Making a call using voice commands
- Transferring a call
- Turning the microphone off (and on) during a call
- Settings
- Adjusting ring volume (in standby mode)
- Adjusting speaker volume (during a call)
- Master reset
- Attaching the strap
- Viewing regulatory information
- Troubleshooting
D
r
a
f
t
f
o
r
Son
y
E
r
icsson Inte
r
nal Use Onl
y
-PE1
15
Preparing the headset
Preparing the headset
Preparing the headset
Preparing the headset
Make sure the headset is turned off (see page 17).
Make sure the headset is turned off (see page 17).
Make sure the headset is turned off (see page 17).
Make sure the headset is turned off (see page 17).
•A: Press and hold the call handling button and make sure
the indicator light flashes red and green. B: If the
headset only flashes green, press and hold the volume
buttons until the indicator light flashes red and green.
•A: Press and hold the call handling button and make sure
the indicator light flashes red and green. B: If the
headset only flashes green, press and hold the volume
buttons until the indicator light flashes red and green.
•A: Press and hold the call handling button and make sure
the indicator light flashes red and green. B: If the
headset only flashes green, press and hold the volume
buttons until the indicator light flashes red and green.
•A: Press and hold the call handling button and make sure
the indicator light flashes red and green. B: If the
headset only flashes green, press and hold the volume
buttons until the indicator light flashes red and green.