INSTRUCTION MANUAL 13.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. http://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-02E". For proper use of the SO-02E, read this manual carefully before and while you use the SO-02E. * You can download the latest information of "クイックスタートガイド (Quick Start Guide)" (in Japanese only).
Operation descriptions In this manual, each key operation is described with p, x, y, r, m. And selection operations of the icons or function items on the touch panel are described as follows. Description From the Home screen, tap and tap [Settings]u[About phone]. Touch and hold an icon. Operation From the Home screen, tap (Applications button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Keep touching an icon longer (12 seconds).
Supplied accessories ･ Battery Pack SO06 ･ 1Seg antenna cable SO01 (with manual) ･ microSD card (2GB)* (Sample) (with manual) Supplied accessories SO-02E (with warranty) ･ Back cover SO20 * Inserted in the terminal when purchased. ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) ･ Stereo Headset with Microphone (Sample) (with manual) クイック スタート ガイド For details on optional devices, see "Optional and related devices" (P.231).
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 16 ■ Handling precautions. . . . . . . . . . . . . . . Before Using the Terminal . . . 22 Part names and functions................................................22 docomo mini UIM card .....................................................23 microSD card ..........................
1Seg............................................................................................ 167 FM radio................................................................................... 174 Camera...................................................................................... 175 Playing multimedia content........................................ 193 Album........................................................................................ 195 YouTube..........................................
Contents/Precautions About using the terminal SO-02E supports LTE, W-CDMA, GSM/GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area. The services may not be available on high upper floors of high-rise apartments or buildings, even if you can see no obstructions around you.
The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching movie, a packet communication charge becomes high. Subscription of packet flatrate service is highly recommended. ･ Public mode (Driving mode) is not supported. ･ Setting the phone to silent mode does not mute sounds for shutter, playback of video or music, alarm, etc.
Notice: Pursuant to the Japanese Radio Law ( 電波法 ) and the Japanese Telecommunications Business Law ( 電気通信事業法 ), this device has been granted a designation number according to the "Ordinance concerning the Technical Regulations Conformity Certification etc. of Specified Radio Equipment ( 特定無線設備の技 術基準適合証明等に関する規則 )" R-(W-CDMA)/Article 2-1-11-3, R-(W-CDMA)/Article 2-1-11-7, IEEE802.11bgn (2.4GHz)/Article 2-1-19, IEEE802.11an (5GHz)/Article 2-1-19-3, IEEE802.
■ The following symbols indicate specific directions. Indicates prohibited actions. 1. Handling the terminal, battery pack, adapter and docomo mini UIM card (common) Don’t DANGER Indicates not to disassemble. No disassembly Don’t No liquids No wet hands Do Unplug ■ Indicates not to use where it could get wet. Indicates not to handle with wet hands. Indicates compulsory actions in accordance with instructions. Indicates to remove the power plug from the outlet.
・Remove the battery pack from the WARNING Don’t Don’t Don’t Do Do terminal. Failure to do so may cause fire, burns, injury or electric shock. Do not subject the equipment to excessive force or throw it. Doing so may cause fire, burns, injury or electric shock. Do not allow the microUSB connecting jack or headset connecting jack to come in contact with conducting foreign substances (a piece of metal, pencil lead, etc.). Never allow these objects to get into the connecting jack.
2. Handling the terminal WARNING Don’t Don’t Don’t Don’t Don’t Do Do not direct the infrared data port toward your eye and transmit signals. Doing so may cause harmful effect your eyes. Do not direct the infrared data port toward home electric appliances etc. equipped with infrared device when using infrared communication. Doing so may cause an accident because of erroneous operation of infrared device. Do not turn on the light with the lighting luminescence part close to the eyes.
Do Do Do If you are wearing any electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation may be affected by radio waves. The radio waves from the terminal may affect electronic medical equipment. Power off the terminal near electronic devices or equipment operating on high precision control or weak signals. Failure to do so may interfere with the operation of electronic devices or equipment.
Do Do The use of the terminal may cause itching, rashes, eczema, or other symptoms depending on the user's physical condition. Immediately stop using and get medical treatment in such a case. For material of each part → P.15 "Material list" When watching the display, take a certain distance from the display in a fully bright place. Failure to do so may reduce visual acuity. Don’t Do Check that the battery type matches the type displayed on the battery pack label.
Don’t Do Do not use or charge a wet battery pack. Doing so may cause battery pack to ignite, burst, heat or leak. If fluid etc. leaks out from the battery pack, do not make the fluid contact with your skin of face or hands. Doing so may cause blindness or injury on your skin. If the fluid etc. gets into your eyes or mouth, or contacts skin or clothes, immediately flush the contacted area with clean running water. If the fluid gets into the eyes or mouth, immediately see a doctor after flushing. 4.
Do Do Do Do When the fuse in a DC adapter is blown, make sure to use the specified fuse. Failure to do so may cause fire, burns or electric shock. For the specified fuse, see the users manuals that supplied with a DC adapter. Clean dust from the power plug. Failure to do so may cause fire, burns or electric shock. When you connect the AC adapter to the power outlet, insert it firmly. Failure to do so may cause fire, burns or electric shock.
Do Do Do Power off the terminal in crowded places such as rush-hour trains. There may be a person with an implantable cardiac pacemaker or implantable cardioverter defibrillator near you. The radio waves from the terminal may affect the operation of implantable cardiac pacemaker or implantable cardioverter defibrillator. If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 22 cm or more away from the implant at all times.
Part Transparent plate (display) Side keys (power key, volume key) (terminal color : Pink/Orange) Side keys (power key, volume key) (terminal color : Black/White) Battery pack (contacts) Battery pack (body (top case)) Battery pack (body (bottom case)) Battery pack (label) Material Glass + PET resin PC resin PC resin Surface treatment Hard coating UV coating Handling precautions ■ Common precautions ･ The terminal, battery pack, adapter and docomo mini UIM card are not waterproof.
･ Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction. ･ Make sure to use the terminal, battery pack, etc. without excessive force. If you put the terminal in a bag full of items or sit down with the terminal in the pocket of your cloth, it may damage the display, internal circuit board and battery pack, causing malfunction.
･ Do not remove the microSD card or power off the terminal while using the microSD card. ･ Doing so may cause data loss or malfunction. ･ - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the phone cannot power on) The performance and life of the battery pack may deteriorate. It is recommended that you store the internal battery with the remaining battery level of about 40% as a guide. Do not let magnetic cards, etc. close to the terminal.
･ ■ Do not give a strong impact to the adapter. Also, do not bend or deform the microUSB plug. ･ Doing so may cause malfunction. ･ Doing so may cause malfunction. docomo mini UIM card Do not use unnecessary force to insert/ remove the docomo mini UIM card. ･ Note that DOCOMO assumes no responsibility for malfunctions occurring as the result of inserting and using docomo mini UIM card with another IC card reader/writer. ･ Always keep the IC portion clean when you use the card.
･ Frequency band ･ The frequency band used by the terminal's Bluetooth/wireless LAN function is written on the battery pack compartment. The label can be read as follows. 2.4 : This radio equipment uses the 2400 MHz band. FH/XX/DS/OF： Modulation scheme is the FH-SS, other system, DS-SS, or OFDM system. 1 : The estimated interference distance is 10 m or less. 4 : The estimated interference distance is 40 m or less. 8 : The estimated interference distance is 80 m or less.
･ Wireless LAN Do not use wireless LAN near magnetic devices such as electrical appliances or AV/OA devices, or in radio waves. - Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven). - When used near TV, radio, etc., reception interference may occur, or channels on the TV screen may be disturbed. - If there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly. ･ 2.
■ Note ･ Do not use altered terminal. Using an altered device is a violation of the Radio Law. A "Technical Conformity Mark " affixed on the manufacturer's specification sticker certifies that the terminal meets technical regulations for specified radio equipment that are based on the Radio Law. If you remove the screws and alter the inside of the terminal, the technical regulations conformity certification becomes invalid.
Part names and functions a b cde y hi j k l m q n r s t z u v f o w g p Front camera lens Ear speaker Proximity sensor : Turns on or off the touch screen to prevent misoperation during a call. d Light sensor : Used for auto controlling of the screen brightness. e Notification LED f Touch screen g Microphone h Infrared data port i Camera lens j Flash/Photo light k NFC/FeliCa antenna section* l FOMA/Xi/Wi-Fi/Bluetooth antenna section* m Second microphone : Reduce noise to make easy to listen.
❖Note ･ ･ Do not put stickers etc. on each sensors. Do not remove the sticker attached to the back side of the back cover. Removal of the sticker may disable reading/writing of IC card. docomo mini UIM card The docomo mini UIM card is an IC card recorded user information such as your phone number etc. ･ You can use the terminal with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace.
Inserting docomo mini UIM card 1 ドコモminiUIMカード Hook the groove at the side of the back cover with the tip of thumb, and pick up the back cover in the direction of the arrow ( ) to remove. 切り欠き Removing docomo mini UIM card 1 2 Remove the battery pack and microSD card, hook the tab ( ) on the tray with the tip of finger to pull out the tray straight, and insert docomo mini UIM card all the way into the tray straight with the metal (IC) part facing down.
Inserting microSD card 1 Hook the groove at the side of the back cover with the tip of thumb, and pick up the back cover in the direction of the arrow ( ) to remove. 2 Remove the battery pack, and check the orientation of microSD card to insert it slowly straight into the holder. microSD card You can use microSD card for any other compatible devices. ･ The terminal supports microSD card of up to 2GB, and microSDHC card of up to 32GB (As of July, 2012).
Removing microSD card 1 Remove the back cover and the battery pack, and side the microSD card out to remove while pressing it with the tip of finger. Operation time on full charge (estimate) The following time varies by the battery pack condition or operating environment. For details, see (P.244). Continuous FOMA/3G stand-by time GSM LTE Continuous call time FOMA/3G GSM Approx. 360 hrs. (stationary) Approx. 280 hrs. (stationary) Approx. 240 hrs. (stationary) Approx. 350 min. Approx. 360 min.
The battery pack is a consumable part. The usage duration of the battery per one charge decreases gradually each time the battery is recharged. ･ When the usage duration per one charge becomes about half of a new battery pack, the life of the battery pack is assumed to be almost over. It is recommended that you replace the battery pack ahead of time. The battery pack may swell out as it comes to near the end of its lifetime depending on the usage conditions, but it is not a problem.
Charging with AC adapter Use the compatible AC adapter for charging. If you use a charger other than the compatible AC adapter, charging may not be available or operations may not be performed correctly. (P.231) When using AC Adapter 03 (optional) for charging, do the following procedures. 1 Insert the microUSB cable horizontally with the microUSB plug engraved side facing up into the microUSB connecting jack of the terminal.
Charging with a PC 1 Insert the microUSB cable horizontally with the microUSB plug engraved side facing up into the microUSB connecting jack of the terminal. 2 Insert the USB plug of the microUSB cable horizontally into the USB port of a PC. If the microUSB cable is connected into the USB connecting jack for charging etc., the terminal is automatically powered on although the operations are not available.
Turning power off Turning power on/off Turning power on 1 Press and hold p for over a second. ･ The unlock screen appears. 1 Press and hold p for over a second. ･ 2 3 A pop-up screen appears. Tap [Power off]. Tap [OK]. Setting screen lock When the screen lock is set, the screen backlight turns off. You can avoid the touch screen or button from false operations. ･ The screen is locked with turning the screen backlight off after the specified time duration. 2 Unlock the screen.
Unlocking the screen An unlock screen appears when turning the power on or the backlight on by pressing p. ■ 1 Screen lock set to "Slide" Touch and hold and drag to until it laps over. Initial settings (Setup guide) When you turn on the terminal for the first time, make initial settings such as a display language, wireless network, online services, docomo service, etc. ❖Information ･ ❖Information appears on the right until you tap or touch and hold .
5 Tap 6 Tap 7 8 9 10 ･ ･ ･ ･ ･ Tap 13 Tap 14 Tap 15 Tap ･ ･ ･ u[Finish]. Initial settings (Setup guide) end and an initial setting screen for docomo service appears. Tap 12 ･ . Preferred applications screen appears. Tap either [docomo applications] or [Xperia™ applications] to select. Tap Tap . The import contacts screen appears. For information on import contacts, see "Exporting/Importing phonebook entries" (P.93). Tap 11 . Automatic renewal screen appears.
Status bar A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed. Notification icons appear on the left side, and the terminal status icons appear on the right side of the status bar. Status bar Status icon The main status icons displayed on the screen are as follows.
Preparing microSD card/internal storage Installation is completed (when installing applications from Google Play, etc.
Notification panel Flick or drag the status bar downwards to enable/ disable silent mode or data communications. ･ / Notification icons are displayed in the Notification panel. You can open notifications, such as mails, reminders, or event notifications directly from the Notification panel. / / / Opening/Closing the Notification panel 1 Flick or drag the status bar downwards. ･ Tap x to close the notification panel. Enable/disable silent mode (Vibrate/Mute). Enable/disable Bluetooth function.
Notification LED Notification LED provides information on the terminal status, incoming/receiving, etc. Basic operations Basic key icon operation LED status Status Red Flashing red Green Flashing green Flashing blue Orange Indication The battery is charging when the remaining battery level is 14% or less. The remaining battery level is 14% or less. The battery is charging when the remaining battery level is 90% or more. Received Gmail mails while backlight is off exist.
Using the touch screen ■ Flick up/down/left/right displayed contents to scroll (move) the display position. Precautions on using touch screen Touch screen is designed for being touched lightly with fingers. Do not push it forcibly with a finger or press it with sharp objects (nail, ballpoint pen, pin, etc.). ･ Touching the touch screen may not work in the following cases. Note that it may cause malfunction.
Switching portrait/landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 From the Home screen, tap , then tap [Settings]u[Display]. Mark [Auto-rotate screen] checkbox. Capturing the screenshot You can save the current displayed screen as an image (screen shot). You can check captured screen shots on the album (P.195).
Marking or unmarking option checkbox You can switch on/off of the option settings by marking or unmarking the checkboxes or radio buttons. ･ To switch on/off of the option setting, tap the checkbox or radio button. ■ Checkbox Searching information in the terminal and web pages Enter a word in the search box to browse the information in the terminal or on the Internet. 1 Mark Unmark ■ , When you use for the first time, the Terms of Service window for Google Search appears.
Search settings Character entry You can set search engines to use for Quick search box or set search objectives in the terminal. 1 From the Home screen, tap then tap [Search]. 2 Tap ･ , , then tap [Settings]. Google search setting screen appears. You can set the following items. Change the search range by marking/unmarking data categories (Google, Apps, Browser, Email, Google Play Movies, Messaging, OfficeSuite, Phonebook, Play Store, WALKMAN) in the terminal.
1 From the Home screen, tap then tap [Settings]. , 2 Tap [Language & input]u[Default]u[Shabette-KeyNyuryoku]/[Xperia™ Chinese keyboard]/[Xperia™ Japanese keyboard]/[Xperia™ keyboard]. ■ Japanese characters can be entered in "Kana input" mode. ❖Information Portrait On a character entry screen, drag the status bar downwards and tap [Select input method] to select from Google voice typing/Shabette-Key-Nyuryoku/ Xperia™ Chinese keyboard/Xperia™ Japanese keyboard/Xperia™ keyboard.
■ Japanese syllabary keyboard You can use the software keys arranged according to the Japanese syllabary to enter Japanese characters in "Kana input" mode. Switching the keyboard 1 On a character entry screen, touch and hold . 2 Tap / / . / / / / / : The phonepad keyboard appears. : The QWERTY keyboard appears. : The Japanese syllabary keyboard appears. ･ : The Kana handwriting input appears. ･ Tap to display Japanese keyboard settings screen and you can check/ change the settings.
Entering characters on the phonepad keyboard You can use the software keys arranged according to the Japanese syllabary to enter Japanese characters in "Kana input" mode. The main functions of the touch-keys ･ To change character modes and other entering operations, tap the following icons on the phonepad keyboard. Icon / Function Each time you tap, the character mode switches "Hiragana/Kanji" → "Alphanumeric" in order and a status / / appears in the icon, → status bar. / Display a pop-up window.
Icon Function Display the previous character (opposite order). In Hiragana/Kanji input mode, highlight and select word in conversion candidates. Tap continuously to change a word highlighted in conversion candidates and select a word to enter. Activate online dictionary. Touch and You need to mark "Online dictionary" checkbox in the Japanese keyboard hold setting screen. / Appears when entering numbers, tap to switch one-byte/two-byte character.
c [On-screen keyboard settings]uUnmark [Flick input] ･ ■ checkbox. To change sensitivity of the flick input, on the Xperia™ Japanese keyboard setting screen, tap [On-screen keyboard settings]u[Sensitivity of flick input], then select "High"/"Medium (default)"/"Low". Toggle entry Tap the same key continuously to enter the assigned character. To enter characters assigned to the same key continuously, operate the followings. ･ Ex: To enter " あお " a Tap " あ " once. b Tap , and tap " あ " 5 times.
Entering characters on the QWERTY keyboard Use the QWERTY keyboard to enter Japanese characters in "Romaji input" mode. The main functions of the touch-keys ･ To change character modes and other input operations, tap the following icons on the QWERTY keyboard. Icon / Function Each time you tap, the character mode switches "Hiragana/Kanji" → "Alphanumeric" in order and a status icon, → / / / / / appears in the status bar. / Display a pop-up window.
Icon Function / / In alphanumerics input mode, tap to switch capitalization/upper case/lower case. In Hiragana/Kanji input mode, highlight and select word in conversion candidates. Tap continuously to change a word highlighted in conversion candidates and select a word to enter. Activate online dictionary. Touch and You need to mark "Online dictionary" hold checkbox in the Japanese keyboard setting screen. / Appears in number input mode, tap to switch alphanumerics to one-byte/twobyte character.
■ ■ Key highlight while typing Changing display keys Widen frequent using key and highlight the key that is predicted for the next entry. ･ Dynamic key resizing with highlight Widen the key that is predicted for the next entry much further and highlight it. ■ For Japanese input, you can set not to display less-frequent-used keys (Q, X, C, etc.) on the QWERTY keyboard. 1 On a character entry screen, touch and hold . 2 3 Tap . Tap [On-screen keyboard settings]u[Hide keys].
Customizing keyboard ･ You can change symbols which are displayed in QWERTY keyboard when entering number to desired characters/symbols. 1 On a character entry screen, touch and hold . 2 3 Tap . Tap [On-screen keyboard settings]u[Keyboard customization]. ❖Information To return to the default status, in Step 3, tap tap [Reset]u[OK].
Icon / Function Each time you tap, the character mode switches "Hiragana/Kanji/alphabets" → "Number" in order and a status icon, / / appears in the status , etc. → bar. / Display a one-byte/two-byte symbol list Touch and to enter them. Switch tabs to display hold smiley list to enter them. (a pictogram tab and deco-mail tab are also displayed when entering in sp-mode mail.) Move the cursor*1 : To the left. Touch and hold to move continuously. Or change the range for conversion.
Entering characters on the Kana handwriting input You can use the Kana handwriting input screen to enter Japanese by "Handwriting input". The main functions of the touch-keys ･ To change character modes and other input operations, tap the following icons on the Kana handwriting input. Icon / Function Each time you tap, the character mode switches "Hiragana/Kanji" → "Alphanumeric" in order and a status / / appears in the icon, → status bar. / Display a pop-up window.
Icon Function When any character is entered or after entered character is fixed, a space can be entered. Touch and hold to input spaces continuously. Enter characters by voice. A candidate list appears. Tap the character string you want to enter. In Hiragana/Kanji input mode, highlight and select word in conversion candidates. Tap continuously to change a word highlighted in conversion candidates and select a word to enter. Activate online dictionary.
❖Information To paste a copied or cut character string, touch and hold a position where you want to insert, then tap [PASTE]. Alternatively, when texts are entered, tap a position where you want to insert, then tap and [PASTE]. ･ Edit menu icons vary by applications. Setting Japanese keyboard ･ Setting character entry For each input method, you can make settings related to character entry. 1 From the Home screen, tap , then tap [Settings]u[Language & input].
❖Information ･ By default, conversion candidates are displayed in 2 lines in portrait/landscape screen. Auto capitalization 3 ❖Information You can set to stabilize the last status of keyboard in the each portrait/landscape screen without marking [Keep keyboard type]. ･ Set to capitalize automatically the top letter you enter in one-byte alphabet entry mode. 1 From the Home screen, tap , then tap [Settings]u[Language & input]. 2 Tap on "Xperia™ Japanese keyboard". 3 Mark [Auto capitalization].
Word suggestion settings The Word suggestion function shows predicted conversion candidates when you enter Japanese/English characters. Mark the checkbox of Word suggestion checkbox to set options "Spell check" and "Auto space". These options help you entering characters with ease. Setting Word suggestion 1 2 3 From the Home screen, tap , then tap [Settings]u[Language & input]. Tap on "Xperia™ Japanese keyboard". Mark [Word suggestions] checkbox.
User dictionary settings To display the word as the preferred candidate when entering characters, set the user dictionary beforehand. Registering words in user dictionaries There are 2 types of user dictionaries: "My words Japanese" and "My words English". 1 2 From the Home screen, tap , then tap [Settings]u[Language & input]. Tap on "Xperia™ Japanese keyboard". 3 Tap [My words Japanese]/[My words English]. 4 5 Tap and [Add]. Tap the character input box for "Reading" and fill it out.
❖Information ･ To delete history for learned words individually, touch and hold a word you want to delete and tap [Delete]. 4 5 Tap [Backup]/[Restore]. Mark a dictionary you want to back up or restore from among [My words Japanese], [My words English], or [Learn words]. 6 Tap [Go]. 7 Tap [OK]u[OK]. Setting online dictionary In Hiragana/Kanji input mode, touch and hold to activate online dictionary. 1 From the Home screen, tap , then tap [Settings]u[Language & input].
Using a plug-in application When entering characters, touch and hold and tap to display the plug-in application list. Adding a plug-in application You can install and add plug-in applications to use when entering characters. 1 From the Home screen, tap , then tap [Settings]u[Language & input]. 2 Tap on "Xperia™ Japanese keyboard". 3 4 Tap [Manage extensions]. On the Info screen, tap [OK]. 5 6 Tap [Download new extensions]. Tap an application and follow the onscreen instructions.
POBox Touch User Guide You can view the detailed explanations on the high performance Japanese keyboard from the basic to application. The latest information can be obtained from the websites for plug-in applications or keyboard skins. 1 2 3 From the Home screen, tap , then tap [Settings]u[Language & input]. Tap on "Xperia™ Japanese keyboard". Tap [POBox Touch User Guide].
❖Information docomo Palette UI Home screen You can switch the home application between "docomo" and "Xperia™" in the terminal. "docomo" is set to the home application by default. To switch the home application, from the Home screen, tap and [Setup guide] and on the Preferred applications screen, [Change now]u[Home screen], or from the Home screen, tap , [Settings]u[Xperia™]u[Preferred apps settings]u[Home screen].
Displaying a list of home screens 1 From the Home screen, pinch-in. ･ A home screen list appears. ❖Information Touch an hold an area of the Home screen where no icons are displayed and tap [Home screens] to display list of home screens. ･ To return to the home screen, pinch-out, or tap y or x. ･ Adding to the Home screen 1 Touch and hold an area of the Home screen where no icons are displayed. ･ ■ Home screens Show home screens. (P.
Adding a widget to the Home screen 1 On "select an action" menu screen (P.61), tap [Widget]. ･ A list of widgets appears. Bookmarks Calendar Contact Contents Headline docomo location information docomo Wi-Fi View bookmarks. Display the calendar. View contacts using Contacts application of Xperia™. Display latest information of contents such as music, videos, ebooks, etc. Activate docomo location information application. View docomo Wi-Fi.
プリインアプリ 利用状況 (Usage View use of preinstalled applications. ❖Information ･ of preinstalled applications) 診断ツール Activate diagnosis tool. (Diagnosis tool) 2 Select an item. ❖Information ･ If you install an application with widget from Google Play, the installed widget is added to the widget list. Adding a folder to the Home screen 1 On "select an action" menu screen (P.61), tap [Folder]. 2 Select a folder you want to add. The folder appears on the Home screen.
When you tap [Album], select an image to set to the wallpaper, drag and set trimming frame for range in the image you want to use as wallpaper, and then tap [Crop] to set wallpaper. ･ When you tap [Live Wallpapers], select a content, tap [Set wallpaper]. You can also download and add Live wallpaper content from a web page. For some contents, you can change type or contents displayed on the wallpaper by tapping [Settings].
Sorting home screens 1 2 From the Home screen, pinch-in. Touch and hold a home screen you want to sort. 3 Drag it to the place you want to move. Moving an icon on the Home screen 1 2 From the Home screen, touch an icon you want to move. Drag it anywhere. ･ To move to another Home screen, keep touching the icon and drag it to left or right.
d Application screen You can access the applications installed in the terminal using the Application screen. Learning Application screen 1 From the Home screen, tap (Applications button). ･ The Application screen appears. a d b Group name ･ To display/hide applications in the group, tap the group name. e Application icon ･ is displayed for newly arrived application. ･ Some application icons are displayed with a number of missed calls or unread mails.
Applications The applications displayed on the Application screen by default are as follows. ･ For usage of some applications, separate subscription (Charged) is required. ■ DOCOMO Services Icon Applications dmenu dmarket i チャネル (i-channel) ｉコンシェル (i- concier) しゃべってコンシェル (Shabette concier) Machi-chara ドコモバックアップ (docomo backup) ■ Description A shortcut application for "dmenu" to find contents that you used in i-mode and joyful and convenient contents for smartphones readily. Activate dmarket.
Icon Applications Phonebook Contacts SD card backup sp モードメール (spmode mail) Area Mail Disaster kit Instruction Manual Setup guide ■ Description Activate DOCOMO phonebook application to manage phonebooks of your friends or colleagues. Activate Xperia™ phonebook application to manage contacts of your friends or colleagues. An application to move or back up data such as phonebook entries, sp-mode mails, bookmarks, etc. using external memory such as microSD card.
Icon Applications Description You can buy topical books or popular comics from SONY's eBook Sony (eBook Reader by store "Reader Store" whenever you like. Sony) FM radio Use FM radio. Movies Acquire video information etc. Connected devices Set and manage media server via Connected devices, and connect DLNA device to the terminal via Wi-Fi network to share files. Facebook Activate Facebook client application. Timescape™ View Social Networking Service (SNS) history.
Icon Applications iD 設定アプリ (iD setting application) ToruCa ■ Page P.165 Acquire, display, search, or refresh ToruCa. P.166 Settings Icon Applications Settings 遠隔サポート (Remote support) Xperia Start Up − ■ Description Make settings for use of electronic money, iD. Update Center Flash Player Settings Description Page P.112 An application for using " スマートフォンあんしん遠隔サポート (Smartphone Anshin Remote Support)".
Icon Applications Play Movies Calendar Maps Navigation Local Latitude Google+ Messenger ■ Description An application for accessing movie rental service of Google Play. Select a movie you want to watch and rent it. Display a calendar and manage schedule. Use Google map services, such as viewing current location, finding another location and calculating routes. Display Google map navigation to receive detailed guides for your destination.
Icon Applications Description An application which supports using packet communication (International overseas. You can set Data roaming setting or a network operator roaming) applicable for international Pake-hodai easily. eco モード (eco mode) An application to set "eco mode" for reducing battery consumption by adjusting each setting such as display brightness. Page ドコモ海外利用 − − ❖Information ･ ･ ･ ･ ･ From the Home screen, tap and tap "Recommends" tab to display applications recommended by DOCOMO.
Changing the Application screen ❖Information ･ From the Application screen, you can add icons, sort icons, uninstall applications. Also you can change group setting. Adding an application icon to the Home screen 1 From the Application screen, touch and hold an icon you want to add to the Home screen. 2 Tap [Add]. ･ The application icon is added onto the Home screen.
Adding a shortcut of group to the Home screen 1 2 From the Application screen, touch and hold an icon you want to add to the Home screen. Tap [Add]. ･ Shortcuts to the group is added to the Home screen. ❖Information ･ Touch and hold an area of the Home screen where no icons are displayed and tap [Group] and select a group to add a shortcut. Changing a label color of the group name 1 From the Application screen, touch and hold a group you want to change the color.
Sorting groups Searching applications 1 From the Application screen, touch and hold a group name you want to sort. Search application installed into the terminal to activate. 2 Drag it anywhere. 1 ･ The group is moved. When you use for the first time, the Terms of Service window for Google Search appears. Read the terms of use and tap [OK]. ･ The software keyboard appears. ･ Opening the recently used applications window You can view and access recently used applications from this window.
Switching application screens Icons on the Application screen can be displayed in a list or tiles. 1 From the Application screen, tap and then tap [List format]/[Tile format]. Checking Home application information 1 From the Application screen, tap and then tap [Application info]. ･ The home application information appears. Installing "Recommends" applications The "Recommends" tab in the Application screen shows applications recommended by DOCOMO.（P.
Phone Emergency call Making/Receiving a call Making a call 1 2 From the Home screen, tap , then tap [Dial] tab. Enter the number of the recipient and tap . ･ If a wrong number is entered, tap to delete the number. When the terminal is within range of the service area, you can make an emergency call of 110 (Police), 119 (Fire and ambulance), or 118 (Japan Coast Guard). 1 From the Home screen, tap then tap [Dial].
on the location where you place a call or radio wave condition. If you make a call hiding your caller ID, such as by entering a phone number with "184" for each call, the location information and phone number are not notified. However, the Emergency call acceptance organization may decide to obtain the location information and phone number regardless of your settings when they consider it is necessary for lifesaving, etc.
Muting the ringtone for an incoming call 1 When receiving a call, press m/p. ❖Information You can stop vibration by pressing m/p when silent mode (vibration) is set. ･ From the Home screen, press m to mute the ringtone for an incoming call. ･ Declining an incoming call and sending a message (SMS) When you cannot answer a call, you can reject the call and send a message (SMS). Message to send is registered in advance, and you can edit it if necessary.
Using Stereo Headset with Microphone ■ 1 You can make or answer a call with Stereo Headset with Microphone (Sample) connecting to the terminal. Making a call Make a call with Stereo Headset with Microphone (Sample) connected. ･ 2 ■ 1 Press the switch to end the call. Receiving a call While receiving a call, press the switch of Stereo Headset with Microphone (Sample). ･ ･ 2 An operation of making a call is the same as usual operation. (P.77) The call is connected.
Adjusting the ear speaker volume 1 During a call, press m to adjust. ❖Information You can adjust the ear speaker volume only during a call. ･ Operations during a call ■ Calling screen a f g f Option menu : Set Hold during a call. ･ To cancel Hold, tap [Retrieve call] during Hold. ･ To set a call on hold, "Call waiting" subscription is required. (P.84) g Number of the other party h Mute : Set muting on/off of the microphone during a call.
Call history Showing call history 1 From the Home screen, tap then tap [Recent calls] tab. ･ , The Recent calls screen appears. Recent calls screen On the Recent calls screen, incoming call history and outgoing call history are displayed in chronological order. a b e f g c d h i a b : Koe-no-Takuhaibin For details on Koe-no-Takuhaibin, refer to "Koeno-Takuhaibin" (P.84) or NTT DOCOMO website.
Displaying missed calls When you have missed calls, the status bar. 1 2 2 ･ appears in Drag the status bar downwards. Tap [Missed call]. Tap desired phonebook entry, or tap [Register new]. 3 When you set Google account etc., tap [Register new] to select an account to register. On the profile editing screen, enter information and tap [Save]. ❖Information When you set the screen lock to "Slide", a missed call icon appears on the screen unlock screen for missed calls.
Network Service Call settings You can use the network services and search for available networks. 1 2 From the Home screen, tap then tap . Tap [Call settings]. ･ , You can set the following options. Network service Koe-noTakuhaibin Voice mail service Call forwarding service Call Waiting Caller ID notification Nuisance call blocking service Koe-no-Takuhaibin is a service of taking voice messages for you. It is a service of taking caller's message when you cannot answer an incoming call.
Accounts Set Internet phone (SIP) account. Use Internet Set Internet phone (SIP) call method. calling Phonebook Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a picture to a phonebook entry, and display phonebook entries by group. g h In the Phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and web service accounts. You can display phonebook entry to get quick access to that contact.
i j Option menu My profile tab ･ Check your own phone number. k Index character area ･ Tap index character to display phonebook entries allocated to the index character. l Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. m Search Managing phonebook Adding a new phonebook entry 1 On the phonebook list screen (P.85), tap [Register]. ･ 2 3 4 When you set Google account etc., you can select an account to add.
Using shortcuts of Phonebook Making a call using the phonebook When you tap the photo (image) part on the phonebook list screen, shortcuts for phone, mail, etc. appear. Tap the shortcut to make a call, or create and send a mail. 1 On the phonebook list screen (P.85), tap a phonebook entry to call. 2 On the Profile screen, tap a phone number. 3 Tap [Call]. Make a call to saved phone number. Create and send message (SMS). Select Email application to create and send an email.
Changing accounts to display Setting group for phonebook entry You can set registered phonebook entries to be displayed in the phonebook list. You can set phonebook entries registered to docomo account to a group from the phonebook list screen. 1 2 On the phonebook list screen (P.85), tap , then tap [Others]u[Accounts to display]. Tap [Display all accounts]/ [docomo]/[Phone contacts]. When "Phone contacts" is set as a saving location, "Phone contacts" is used as a phonebook. (P.
3 On the group addition screen, enter color, icon, group name, and tap [OK]. ･ The items vary depending on the account type. ❖Information You can edit/delete newly created groups and "Family"/"Friends"/"Company", which are saved by default. To edit a group, touch and hold a group and tap [Edit group], then enter group name etc. and tap [OK]. To delete a group, touch and hold a group and tap [Delete group], then tap [OK]. Phonebook entries belonged to the deleted group move to the "No group" tab.
4 5 Tap [Take photo]/[Select picture]. ･ After shooting a photo or selecting an image, drag or pinch adjusting a trimming frame to set range for displaying image, and then tap [Crop]. You can also set photo to a phonebook entry by the following operation. From the Home screen, tap , then tap [Album]. Select an image you want to set and tap the screen and , then tap [Use as]u[Photo of phonebook]. Select a phonebook entry you want to register, set image range to be displayed, and then tap [Crop].
❖Information ･ To delete only an item of phonebook entry, on the phonebook list screen (P.85), tap a phonebook entry you want to delete and tap , then tap [Delete]u[OK]. Checking My profile and editing information 1 On the phonebook list screen (P.85), tap [My profile]. 2 3 Tap [Edit]. On the My profile screen, enter necessary information. ･ 4 Tap [Add] to set phone number or mail address, and tap [Set] to add SNS or Blog account. Tap in "Others", then tap [Add] to add information.
❖Information ❖Information Alternatively, to start Linking to SNS, tap [TimeLine] tab in the phonebook entry list screen (P.85) and tap [Start right now] to register SNS/Blog account information. ･ SNS information cannot be displayed for phonebook entries saved in other than docomo account. ･ To display SNS information, from the phonebook entry list screen (P.85), tap , tap [Others]uTap [Linking to SNS settings] and select SNS account and user to display and tap [End].
3 Select sending method and follow the onscreen instructions. ■ Sending My profile Tap [My profile] on the phonebook list screen (P.85). Tap and [Share]. Select sending method and follow the onscreen instructions. 1 2 3 ❖Information ･ ･ ･ ･ ･ To use Bluetooth function, turn on Bluetooth function (P.156) in advance or select [Bluetooth] in Step 3 then tap [Turn on].
❖Information ･ You can also use a synchronization service for synchronizing your phonebook. For details, refer to "Setting Auto-sync" (P.137). Exporting phonebook to microSD card 1 2 3 On the phonebook list screen (P.85), tap , then tap [Others]u[Import/Export]. Tap [Export to SD card]. Select a phonebook you want to export.
･ Alternatively, on the phonebook list screen, tap [My profile] tab, then tap and [General settings]u[Data management]u[Import]u[Import from SD card] to import phonebook entries from a microSD card. Importing phonebook entries from docomo mini UIM card 1 2 3 On the phonebook list screen (P.85), tap , then tap [Others]u[Import/Export]. Tap [Import from SIM card]. ･ When you set Google account etc., select an account.
Mail/Web browser sp-mode mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). You can use pictogram and Deco-mail. Mails can be received automatically. For details on sp-mode mail, refer to " ご利用ガイドブック (sp モード編 ) (Mobile Phone User's Guide [spmode]) (in Japanese only)". 1 2 From the Home screen, tap . Flick the screen, then tap [ ダウン ロード (Download)]. ･ After this step, follow the instructions on the screen.
･ 6 When the number of entered characters comes close to a limit, a counter appears on the upper left of the text box and you can check the remaining entry space. Tap [Send]. ❖Information For the character entry, see "Character entry" (P.40). You can also send/receive text messages to/from customers of overseas network operators. See "Mobile Phone User's Guide [International Services]" or the DOCOMO International Services website.
Setting message (SMS) 1 From the Home screen, tap then tap [Messaging]. 2 Tap ･ Deleting a message (SMS) , and then [Settings]. You can set the following options. Delivery report If you mark, a message (SMS) you sent is marked each time a recipient receives the message (SMS). Notifications Mark if you want to be notified by the status bar when a new message (SMS) arrives. Notification Set if you want to be notified by tone selected notification tone when a new message arrives.
5 Email ･ ･ You can create an email account provided by mopera U mail, a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. Making initial setting for Email Email setup wizard appears. Set according the onscreen instructions. Multiple email accounts can be set. 1 From the Home screen, tap and then tap [Email]. 2 Enter your email address and password. Tap [Next].
Creating and sending email 1 From the Home screen, tap and then tap [Email]. 2 3 Tap (Compose). Enter the email address of recipient. , Tap to display the contacts list screen to select from registered contacts. When you enter a name or email address in the box at the top of the screen, a list of contacts beginning with the entered numbers or letters appears. ･ To Cc or Bcc, tap and tap [Show Cc/ Bcc].
1 From the Home screen, tap and then tap [Email]. ･ 2 3 , If you have already set an email account, tap [Inbox] to select an email account to receive. On the Inbox, tap [Refresh]. Tap an email. and tap ❖Information The sender name of a received email is the name set on sender's terminal. ･ If you set "Email notifications" in Account settings (P.103) and set "Inbox check frequency" to an item other than "Manual", appears in the status bar when you receive a new email.
Saving attachment file of email 1 From the Home screen, tap and then tap [Email]. 2 Tap email and 3 Tap [Save] of file you want to save. ･ , . The attached file list is displayed. When attached file is not loaded, tap [Load]. ･ Tap [View] to view the attached file. The attached file is saved on the internal storage. Replying/forwarding email 1 2 3 4 Deleting email ･ ❖Information ･ When you reply or forward an email, the original message contents for replying or forwarding is quoted.
Changing Email account settings 1 2 3 From the Home screen, tap , and then tap [Email]. Tap and [Settings]. Tap an Email account you want to change the settings. ･ You can set the following options. Change account name. Change your name (sender name). Change your signature. Register phrase that can be inserted when creating an email. Default Set to the default account to send account email, if you set two or more email accounts.
Setting another Email account 1 From the Home screen, tap and then tap [Email]. 2 Tap and [Settings]u[ADD ACCOUNT]. Enter your email address and password. 3 ･ 4 5 If required, mark [Send email from this account by default.] checkbox. Tap [Next]. If you need to make the settings manually, contact your email service provider or system administrator for the correct email account settings.
Using mopera U Mail mopera U users (for the setting, see "Setting mopera U" (P.124)) can use mopera U Mail. In mopera U Mail, POP mail and IMAP mail are available. The mail box supports 50MB. Also, the Web mail system is available. ■ 1 POP mail From the Home screen, tap and then tap [Email]. ･ 2 4 Select the security type. 6 7 Confirm the entry, then tap [Next]. Enter [mail.mopera.net] for the SMTP server and confirm the entry of [User name] and [Password] for mopera U.
Gmail Google Talk If you have a Google account, you can send/ receive emails by using Gmail on your terminal. If you have no Google account, see "Setting Google account" (P.134). ❖Information You can use Google Talk instant messaging to chat with friends. To use Google Talk, you need to make settings of your Google account. For details, refer to "Setting Google account" (P.134). Gmail messages are not displayed in Timescape.
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
Setting Early Warning "Area Mail" 1 2 From the Home screen, tap then tap [Area Mail]. Tap and then [Settings]. Receive setting Beep tone Web browser Opening Browser , 1 1 Tap the address entry field on the top of the web page in the Browser screen. ･ 2 Area Mail cannot be set when docomo mini UIM card is not inserted. ･ 3 If web page address entry field is not displayed, flick down the screen to display. Enter the web page address or keyword to be searched for. ❖Information ･ .
Exiting Browser 1 Tap y. Displaying web page Adding a new tab ❖Information ･ Web pages created to fit to the screen cannot be zoomed in/out. Searching text in a web page 1 ･ Open multiple tabs and view website. 1 While viewing a web page, tap and tap . ･ A new tab opens in the default home page. Switching tabs 1 On the Browser screen, tap and then tap a tab you want to display. Closing a tab 1 On the Browser screen, tap and then tap of a tab to close.
4 Touch and hold the entry field on the pasting location, and tap [PASTE]. ❖Information ･ On some web pages, selecting characters may not be available. Adjusting Browser settings 1 On the Browser screen, tap and [Settings] to select an item for the Browser. Setting a home page Set home page for opening new tab. 1 On the Browser screen, tap and then [Settings]u[General]u[Set homepage] and select a home page setting option.
Checking browsing history Managing bookmarks and history You can check history and store many bookmarks on the terminal. 1 On the Browser screen, tap and tap [Bookmarks]u[History] tab. 2 Tap the time you browsed the web page, such as [Today], [Yesterday], etc. Bookmarking a web page 1 On the Browser screen, display the web page you want to bookmark. 2 3 Tap and [Save to bookmarks]. Set label etc. and tap [OK]. ･ Set a name displayed to the bookmark. Set URL saved to the bookmark.
Settings Wi-Fi Viewing the setting menu 1 ■ From the Home screen, tap then tap [Settings]. , Setting menu WIRELESS & NETWORKS DEVICE PERSONAL SYSTEM P.112 P.125 P.134 P.146 ❖Information ･ Alternatively, from the Home screen, tap and u[Settings], or open the notification panel and tap to display the Settings screen. Wireless & networks You can make settings related to networks such as Wi-Fi, Bluetooth function. Wi-Fi Bluetooth Data usage More...
■ Reception interference caused by Bluetooth devices Bluetooth devices and wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4GHz). If you use Bluetooth devices near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. Communication may be interrupted or sound may be lost while streaming data, etc.
Turning on Wi-Fi 1 From the Settings screen (P.112), tap of Wi-Fi or drag it to the right. ❖Information ･ It may take a few seconds before the Wi-Fi connection is on. Connecting to a Wi-Fi network 1 From the Settings screen (P.112), tap [Wi-Fi]. ･ 2 Available Wi-Fi networks are displayed. The available networks may be open or secured. This is indicated by or next to the Wi-Fi network name. Select Wi-Fi network you want to connect, tap [Connect].
■ Wi-Fi network status icons on status bar The following icons appear according to the Wi-Fi network connection status. Appears when connected to Wi-Fi network. Appears when communicating via Wi-Fi network. Appears when connected to Wi-Fi network using Auto IP function. Appears when any open network within the service area is detected.* * Without connected to Wi-Fi network, you need to set Wi-Fi Network notification to on beforehand. (P.
4 Tap [Security] field and tap a security type of the Wi-Fi network you want to add. ･ 4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear. 5 If required, enter security information for the Wi-Fi network you want to add. 6 Tap [Save]. Viewing detailed information on a connected Wi-Fi network Wi-Fi sleep policy By changing Wi-Fi sleep policy, you can choose to disable the Wi-Fi function in the terminal when the screen backlight turns off.
Bluetooth Connect Bluetooth device wirelessly using Bluetooth function. For Bluetooth communication, see "Using Bluetooth function" (P.156). Setting data usage limit 1 From the Settings screen (P.112), tap [Data usage]. 2 Tap [Set mobile data limit] and read the notes, and then tap [OK]. ･ Data usage Enable/Disable data communication or set data usage limit. ❖Information ･ You can check communication volume for each application. For some applications, the settings can be displayed.
Permitting data roaming 1 From the Settings screen (P.112), tap [Data usage]. 2 Tap and then [Data roaming], read the notes and then tap [OK]. ･ [Data roaming] checkbox is marked. Restricting background data You need to set mobile data restriction beforehand.（P.117） 1 From the Settings screen (P.112), tap [Data usage]. 2 Tap and [Restrict background data], then read the notes and then tap [OK]. ･ [Restrict background data] checkbox is marked.
Connecting to a VPN (Virtual Private Network) Virtual Private Network (VPN) is a technology to connect to the information in a protected local network from another network. Generally, VPNs are provided to companies, schools and other facilities. A user can access to the information in the local network from outside of the premises. To set up a VPN access from the terminal, you need to retrieve the information related to security from your network administrator. For details, refer to http://www.sonymobile.
Using tethering function Tethering stands for using mobile devices such as smartphone as modem to allow USB compatible devices or wireless LAN devices to access the Internet. ❖Information Packet communication charge when using tethering varies depending on the charging plan you use. Subscription of packet flat-rate service is highly recommended. ･ For details on usage charge, etc., refer to http://www.nttdocomo.co.jp/english/ . ･ For details on tethering, from the Settings screen (P.112), tap [More...
Setting up a portable Wi-Fi hotspot Setting Wi-Fi tethering You can use the terminal as a Wi-Fi access point to connect up to 10 wireless LAN devices to the Internet simultaneously. 1 1 From the Settings screen (P.112), tap [More...]u[Tethering & portable hotspot]. 2 3 Tap [Configure Wi-Fi hotspot]. Enter a network SSID of the Wi-Fi access point to set. ･ 4 By default, "Xperia XX SO-02E_XXXX" is set. Tap [Security] field and tap a security type of Wi-Fi access point to set.
Using Wi-Fi Direct function You can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point. 1 From the Settings screen (P.112), tap [More...]u[Wi-Fi Direct]. When the Wi-Fi setting is on, the note appears. Read the note and tap [OK]. ･ [Wi-Fi Direct] is marked. ･ ❖Information Setting an access point An access point for connecting to the Internet (sp-mode, mopera U) is already registered. You can add or change it if necessary. By default, sp-mode (P.
Setting an access point additionally 1 2 3 4 From the Settings screen (P.112), tap [More...]u[Mobile networks]u[Access Point Names]. Tap . Tap [New APN]. Tap [Name], enter a name and tap [OK]. 5 Tap [APN] and enter the access point name and tap [OK]. 6 Tap and enter all other information required by your network operator. 7 Tap Using block access point change function Set to prevent changing access point automatically. 1 2 From the Settings screen (P.112), tap [More...]u[Mobile networks].
Initializing an access point By initializing an access point, the default state is restored. 1 2 From the Settings screen (P.112), tap [More...]u[Mobile networks]u[Access Point Names]. Tap and tap [Reset to default]. sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as imode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on spmode, refer to NTT DOCOMO website.
Device Adjusting each sound volume 1 Call settings From the Settings screen (P.112), tap [Sound]u[Volumes]. ･ You can use the network services and search for available networks. For Call settings, see "Call settings" (P.84). Sound 2 Set audio playback level enhancement technology ("xLOUD") to enjoy powerful sounds with the built-in speaker when playing WALKMAN, YouTube, Album, etc. Volumes P.125 Silent mode P.126 Phone ringtone P.126 Default P.126 notification Vibrate on ring P.126 Dial pad touch P.
Setting Silent mode 1 From the Settings screen (P.112), tap [Sound]u[Silent mode]. 2 Tap any of [Off]/[Vibrate]/[Mute]. ❖Information You can also set the Silent mode by pressing and holding p for over a second and then tap / in the pop-up screen. Set Mute (ringtone volume 0) by tapping or set Vibration by tapping . ･ Setting the phone to Silent mode does not mute sounds for shutter, playback of video or music, alarm, etc. Note that volume up for "Ringtone & notifications" in Volumes (P.
To set the key sound of software keyboard, select a type of software keyboard (P.53) to set. ･ Display Set brightness, orientation of the screen, etc. To view photos or movies colorfully and beautifully, set image quality improving procedure (Mobile BRAVIA Engine). It adjusts contrast, color shade, etc.* Brightness P.127 Wallpaper P.63 Auto-rotate screen P.38 Sleep P.127 Font size Set font size. Theme Set a background for the Home screen, Settings screen, etc. Lock screen P.
Setting information displayed on the unlock screen Yon can set information displayed on the unlock screen (P.31). To display information, set unlocking method of the screen lock to "Slide". 1 From the Settings screen (P.112), tap [Display]u[Lock screen settings]. ■ Displaying notification Mark [Missed calls]/[New sp-mode mails]/ [New messages]/[New emails]/[Calendar events]. ･ By default, "Missed calls", "New spmode mails" and "New messages" are marked.
■ Displaying Machi-chara Mark [Machi-chara] and tap [OK]. ･ Set "Machi-chara" widget on the Home screen in advance. For setting procedure, see "Adding a widget to the Home screen" (P.62). ･ If [Machi-chara] is marked, three checkboxes or less can be marked for Notification (P.128). Storage Check memory volume of the phone memory, internal storage, microSD card, and USB storage. And you can delete data in the internal storage, microSD card and USB storage and format.
Unmount USB storage* Mount USB storage* Clear USB storage Cancel connection of USB storage to remove it safely. Have USB storage recognized. Formatting microSD card 1 From the Settings screen (P.112), tap [Storage]. P.130 2 Tap [Erase SD card]u[Erase SD card]. * Display changes depending on condition of USB storage or microSD card recognition. ❖Information ･ Note that when available memory of internal storage becomes 32KB or less, microSD card cannot be mounted.
Increasing the available memory of the terminal If the terminal has a small memory, you can perform the following operations to increase available memory. ･ In the browser, you can clear all temporary Internet files and browser history information. For details, refer to "Clearing history" (P.111). ･ Uninstall programs that you no longer use. For details, refer to "Deleting installed application" (P.132).
Shutting down an application Deleting installed application If a pop-up window that indicates the application does not reply appears, you can force quit the application. ･ 1 From the Settings screen (P.112), tap [Apps]. 2 3 4 Tap an application to force-quite. Tap [Force stop]. Read the cautions displayed, tap [OK]. ❖Information ･ When you do not want to force stop the application, tap [Cancel] and wait for a reply of the application.
Disabling application You can disable some applications which cannot be uninstalled or services. Disabled applications are not displayed on the Application screen and you cannot execute them, but they are not uninstalled. 1 2 3 4 5 From the Settings screen (P.112), tap [Apps]. Tap [All]. Tap an application to be disabled. Tap [Disable]. Read the cautions displayed, tap [OK]. ･ To enable again, tap [Enable].
Personal docomo service You can set passwords for applications provided by docomo or to use the services supporting AUTO-GPS. Set to check update for applications regularly. Set to use docomo service via Wi-Fi. docomo apps Set a password for applications password provided by docomo. docomo apps password is set "0000" by default. AUTO-GPS Set to use the services supporting AUTO-GPS.
❖Information You can use the terminal without creating your Google account, however the services such as Google Talk, Gmail, Google Play, etc. are not available. ･ To log in, you need a Google account and a password. ･ When you sign in, "Backup and restore" screen may appear. Backup is not available using a Google account. ･ Tap Google account displayed on the "Accounts & sync" screen and synchronize each data from the following items manually.
Setting Facebook account ❖Information When you register or sign in Facebook, you can display profile information published by online "Friend" to Phonebook. And you can display Facebook updates of "Friends" in Timescape. ･ ❖Information If you do not have a Facebook account, you can also create a new account at http://www.facebook.com/. ･ If you download and install client applications for Twitter or mixi, you can set up accounts and synchronize contacts information in the same manner as for Facebook.
Setting other account Removing account You can use Corporate (Exchange ActiveSync), docomo account, Email, Facebook inside Xperia™ other than Google account (P.134) or Facebook account (P.136). 1 From the Settings screen (P.112), tap [Accounts & sync] and select a service account you want to delete. Corporate (Exchange ActiveSync) account 2 Tap , then tap [Remove account]u[Remove account]. ■ ･ ■ If you have Corporate (Exchange ActiveSync) account, from the Settings menu screen (P.
5 Tap to mark an item for automatic synchronization. ･ If the items to be synchronized are marked and checkboxes are led by , synchronization starts. When is not displayed, tap and tap [Sync now] to start synchronization. ❖Note Tap or drag it to the right to permit to synchronize with your Gmail, calendar, contacts, and profile information published by "Friends", etc. in Google account automatically. These communications may cause you to pay packet communications charges.
Install from internal Install encrypted certificates storage from internal storage. Clear credentials Clear all certificates or credential information from the credential storage *3. *1 To use Omakase Lock, enable "Omakase Lock". *2 Set the password to the credential storage in advance. *3 Save certificates and credential information in the credential storage. Protecting docomo mini UIM card Some functions provided for convenient use of the terminal require the security code to use them.
･ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as drivers license), the docomo mini UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page of this manual.
Personal Unblocking Key (PUK code) Changing the PIN code The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself. ･ If you failed to enter PUK code 10 times consecutively, the docomo mini UIM card is locked. Please contact a docomo Shop. ･ Enabling the docomo mini UIM card PIN By setting PIN (security code) and entering PIN code when powered on, you can protect the docomo mini UIM card from improper use. 1 2 From the Settings screen (P.
Unblocking the locked docomo mini UIM card 1 On the PUK code entry screen, enter the PUK code of the docomo mini UIM card. 2 Tap [New SIM PIN] field and enter new PIN code of docomo mini UIM card, then tap [OK]. 3 Enter the new PIN code of the docomo mini UIM card again and tap [OK]. Screen lock You can secure your data by requiring a screen unlock pattern every time the terminal is turned on or every time it is activated from sleep mode.
Changing screen unlock method 1 From the Settings screen (P.112), tap [Security]u[Screen lock]. If you forget how to unlock ■ "Incorrect pattern" appears when you enter incorrect unlock pattern 5 times consecutively. ･ Tap [Next], and answer the security question that you set for the unlock pattern setting, then tap [Unlock] to unlock the screen lock. ･ If you set Google account, on the "Incorrect pattern" screen, tap [Next] to display "Answer question" and "Enter Google account details".
･ You can set multiple Google accounts. To unlock the screen with Google account and password, enter one of those accounts. ■ If you set "PIN"/"Password" Please contact a docomo Shop. Canceling screen lock You can cancel screen lock pattern after you set. 1 From the Settings screen (P.112), tap [Security]u[Screen lock]. ･ 2 Enter the set unlock pattern/PIN/ password. Tap [None].
Language & input You can select language and input method. Language Spelling correction Personal dictionary Default Google voice typing Shabette-Key-Nyuryoku Xperia™ Chinese keyboard Xperia™ Japanese keyboard Xperia™ keyboard Voice Search Text-to-speech output Pointer speed P.145 Set spelling correction. Register words. Set input method. P.53 2 P.145 P.145 Set pointer speed of mouse etc. From the Settings screen (P.112), tap [Language & input]u[Language]. Select a language and tap [Done].
Backup & reset System Restore the terminal to default. Resetting the terminal Resetting the terminal deletes all data, including downloaded applications and accounts, and resets the terminal back to the initial (default) state. Make sure to back up important data you have on the terminal before you reset the terminal. For the initial settings, see "Initial settings (Setup guide)" (P.31). 1 From the Settings screen (P.112), tap [Backup & reset]u[Factory data reset]u[Reset phone].
❖Information ･ Correction of the time differences may not be performed correctly depending on the overseas telecommunication carrier. In that case, set time zone manually (P.147). Setting the date 1 From the Settings screen (P.112), tap [Date & time]u[Set date]. 2 3 Drag number to adjust date. Tap [Set]. Setting the time zone 1 2 Setting the time format 1 Setting the time 1 2 From the Settings screen (P.112), tap [Date & time]u[Set time]. Drag number to adjust hour and minute.
Accessibility Developer options You can set user support service which sounds or vibrates according to users operation and call end operation. TalkBack Large text Power button ends call Auto-rotate screen Speak passwords Touch & hold delay Install web scripts Set user support service (TalkBack). Enlarge text size. Set to end a call by pressing p. P.38 Output password by voice sound. Set response time for operation of touching and holding the screen. Set whether to install script from Google.
File management Handling a file Files in the terminal should be operated on the file handling application. For example, to delete files saved in a microSD card or internal storage, use the deletion function of each application. With "Share" function of each application, you can exchange files sending to/receiving from other compatible devices via infrared communication, Bluetooth or by email file attachment.
2 Tap [Skip]. ･ ❖Information Window that appears when connecting to a PC may vary depending on the operating system (OS) of a PC. ･ From the Home screen, tap and tap [Settings]u[Xperia™]u [Connectivity] to check connection mode and change the settings as follows. ･ Install PC Companion USB connection mode TRUSTED DEVICES ･ Display PC Companion installation wizard when connected to a PC.
Disconnecting the microUSB cable safely Dragging and dropping data on the terminal and a PC Do not disconnect the microUSB cable during data transferring. Data may be damaged. ･ If you connect the terminal in the Media transfer mode (MTP), make sure that data transfer is not in progress and just disconnect the microUSB cable. ■ Mass storage mode (MSC) Drag the status bar downwards. Tap [SD card connected]. 2 ･ ■ 1 2 3 ･ "SD card disconnected" appears in the status bar.
Connecting the terminal to a PC on a Wi-Fi network 4 Make sure that "Xperia XX SO-02E" is displayed as a portable device on the explorer of the PC. If the terminal and a PC* are connected in a pair on a Wi-Fi network, automatic connection/disconnection of internal storage of the terminal with a PC is enabled when the terminal user comes in and out of the Wi-Fi area. You can easily access to files in the internal storage of the terminal from a connected PC.
❖Information From the Home screen, tap and tap [Settings]u[Xperia™]u[Connectivity] to display "Host name" (PC name) in the "TRUSTED DEVICES" field. To cancel connection setting, tap the host name and [Forget]. Until "Forget" is tapped, the connection setting retains even if you connect/ disconnect repeatedly by coming in and out of a WiFi area. ･ If the privacy separator function for Wi-Fi network (access point) is enabled, pair setting cannot be made.
･ ･ ･ ･ ･ ❖Information ･ If the set alarm time comes during infrared communication, data exchange is interrupted and the alarm starts to sound. is displayed in the status bar during infrared communication. You can send and receive Phonebook entries, My profile, name card, sp-mode mail, Schedule & memo, still images (.jpeg, .png, .gif, .bmp), videos (.mp4, .3gp) and ToruCa. It may take a time to exchange data depending on the data amount or device of other party.
Sending data via infrared communication For sending from "Album", see "Sharing image files" (P.197). ･ You cannot send 2 or more images or videos at a time. ･ Start Infrared application and select data to send. You can also send data from an application menu such as Phonebook, Album, etc. ■ 1 2 Sending all data using infrared communication application From the Home screen, tap , then tap [Infrared]u[Send all]. Tap [Phonebook]/[sp-mode mail]/ [Scedule&Memo]u[Start].
You may not save received data if the phone memory is full. ･ A file name may be changed when saving. A file named with 127 characters or more (Unicode) may not be saved properly. ･ Using Bluetooth function The Bluetooth function creates a wireless connection to other Bluetooth devices, for example, handsfree devices. A range within 10 meters, with no solid objects in between, is recommended. You must turn on the Bluetooth function to communicate with Bluetooth devices.
Making the terminal detectable with the Bluetooth function on 1 2 From the Home screen, tap , then tap [Settings]. Tap in Bluetooth or drag it right. ･ 3 4 appears on the status bar and Bluetooth function turns on. Tap [Bluetooth]. Tap [SO-02E]. ･ The terminal becomes detectable by other Bluetooth devices for 2 minutes. Entering the terminal's name You can name the terminal. The name appears on Bluetooth devices when you use the Bluetooth function.
2 From the Home screen, tap tap [Settings]u[Bluetooth]. 3 Tap [Search for devices]. A list of detected Bluetooth devices appears. 1 4 Tap a Bluetooth device name to pair with the terminal. 2 5 Check a passkey on the "Bluetooth pairing request" screen, then tap [Pair]. 3 ･ and You can use the Bluetooth device that has been paired. ･ Some Bluetooth devices make connections continuously after making pair setting. ･ Authentication passcode may be required on the "Bluetooth pairing request" screen.
Deactivating the connection of a Bluetooth device 1 2 3 From the Home screen, tap and tap [Settings]u[Bluetooth]. Tap the connected Bluetooth device name. Tap [OK]. ･ To reconnect, tap the device name. Canceling the pair setting of a Bluetooth device 1 From the Home screen, tap tap [Settings]u[Bluetooth]. 2 Tap in a Bluetooth device name to unpair and tap [Unpair].
❖Information On the Media server screen, tap connection. ･ to set Wi-Fi Playing media files in the DLNA device with the terminal Set Wi-Fi connection with a DLNA device to allow access from the terminal in advance. 1 From the Home screen, tap , then tap [Connected devices]. ･ Connect the terminal to a DLNA device via Wi-Fi in advance. 1 From the Home screen, tap , then tap [Connected devices]. 2 Tap , then tap [Media server] and tap in Share content or drag it right.
Applications dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. Opening dmenu 1 From the Home screen, tap [dmenu]. ･ dmarket You can obtain useful and interesting contents which meet your needs at dmarket. Opening dmarket 1 ･ Browser activates to display "dmenu". When you activate for the first time, "d マーケットソフトウェア使用許諾契約書 (License Agreement)" appears. Mark [Agree] checkbox and tap [Start use].
･ Play Store With Google Play, you can directly access useful applications or fun games which you can download and install on the terminal. And you can send feedback and comments about an application, or report objectionable application or incompatible application with the terminal as an inappropriate content. ･ To use Google Play, you need to set Google account (P.134). ･ Some applications and games are free of charge, and the others are paid.
Deleting application 1 From the Home screen, tap [Play Store]. 2 3 Tap and [My Apps]. Tap the applications you want to delete, then tap [Uninstall]u [OK]. ･ When you uninstall charged applications, a screen for refund may appear. For details, see "Help" (P.163). Help When you need help or have any questions about Google Play, display the Google Play screen, then tap and tap [Help]. The Browser opens the Google Play Help web page.
transfer of data, contact Osaifu-Keitai compatible service providers. For important data, be sure to use a service with backup service. ･ If the data in the IC card is lost, modified or damaged by any means related to OsaifuKeitai compatible service such as malfunction or model change, DOCOMO assumes no responsibility for the loss of data. ･ If the terminal is stolen or misplaced, immediately contact Osaifu-Keitai compatible service provider for an advice.
❖Information You can scan and write data to or from an IC card reader without activating Osaifu-Keitai compatible application. ･ The function is available even if the terminal is off, but it is not available when the battery pack is not attached. Even if the battery pack is attached, the function may not be available when you leave the terminal off for a long time or the battery level is low, etc.
A packet communication fee for oversea use differs from the one in Japan. ･ For details on iD, refer to iD website (http://idcredit.com/ (In Japanese only)). ･ ToruCa ToruCa is an electronic card that can be obtained to mobile terminals. It can be obtained from the IC card reader or site as store information, coupon ticket, etc. Obtained ToruCa is saved to the "ToruCa" application. Use the "ToruCa" application to display, search or update.
1Seg 1Seg is a terrestrial digital TV broadcasting service that allows mobile devices to receive broadcasted data along with images and sounds. You can also acquire detailed program information, participate in quiz programs, enjoy TV shopping, etc. For details on "1Seg", refer to the following website. The Association for Promotion of Digital Broadcasting http://www.dpa.or.jp/english/ Using 1Seg 1Seg is a service provided by TV broadcasting enterprises (stations), etc.
antenna when inserting to or removing from the terminal. 1 Connect the plug of Stereo Headset with Microphone (Sample) to headset connector of the 1Seg antenna cable ( ). 2 Connect the plug of the 1Seg antenna cable to the headset connector of the terminal ( ). Initial settings for 1Seg Make channel setting when you activate 1Seg for the first time. After channel setting is done, 1Seg programs can be watched. 1 From the Home screen, tap tap [1Seg]. 2 Tap [Watch].
d Watching 1Seg program 1 From the Home screen, tap tap [1Seg]. 2 Tap [Activate 1Seg]. ･ and It may take a time to acquire image data or broadcasted data when you activate 1Seg or change channels due to characteristic of digital broadcasting. ･ According to the airwave condition, image or sound may be interrupted or stopped. ･ If the terminal receives a call while watching 1Seg, 1Seg is interrupted and resumes after the call ends. ･ 1Seg screen d a b 1Seg watching screen appears.
For data broadcasting, screen display supports portrait only. ･ Flick the 1Seg watching screen left and right to select the previous or next channel you are currently watching. ･ To exit 1Seg, tap x on the 1Seg watching screen. ･ Setting 1Seg 1 Tap on the 1Seg watching screen (P.169) then tap [Setting]. ･ You can set the following options. Display information for available channels. Program info Display information for received programs.
Watching data broadcasting For data broadcasting, you can view various information by following the onscreen instructions. ❖Information To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication fees are charged. ･ Using TVlinks For some data broadcasting programs, link information to related websites (TVlink) is displayed.
Viewing/Deleting details of TVlink 1 From the Home screen, tap tap [1Seg]. 2 Tap [TVlink] and tap ･ Available channels vary depending on the area (broadcasting service area) you are using in. . Menu appears. Check the number of registration Delete all Delete selected Storing/Changing broadcasting service areas and Check the number of stored TVlinks. Delete all stored TVlinks. Delete several stored TVlinks. Mark a TVlink to delete and tap tap [Delete data?] u [YES].
■ Using menus on the channel list selection screen Making User setting Touch and hold the channel list selection screen to display menus for displaying information, setting, editing titles, deleting, etc. Initializing settings You can initialize the channel setting and 1Seg setting. Changing numbers for TV remote Change TV remote number assigned to each broadcasting station. Each broadcasting station can be called up via the corresponding TV remote number. 1 From the Home screen, tap tap [1Seg].
3 FM radio You can listen to the FM radio with the terminal. Tuning can be made automatically or manually, and you can register your favorite channels to Favorites. To use FM radio, use a handsfree device such as Stereo Headset with Microphone (Sample), etc. or a headphone. They work as antenna. Alternatively, tap / to search for channels. ･ The search ends when radio waves are received. ･ 4 Tap , then tap [+ Add XX.X to favorites]. 5 Tap entry box, enter a name and tap [Save].
■ FM radio screen Camera d e a b c f g h i j k a b c Monaural/stereo effect Play in speaker/Play in handsfree Channel point displayed in a good radio wave condition d On/Off of FM radio e View optional menu f Broadcasting station now listening g Channel assigned to favorite h Search channels automatically i Move left to select next favorite j Favorites saving/editing/tuning k Move right to select next favorite Switching the speaker and handsfree device 1 2 On the FM radio screen, tap .
or recording a stage performance, entertainment or exhibition may be prohibited even if for personal use. About the Copyright and Portrait rights Objects, such as movies, still images, and sounds, recorded using the terminal are prohibited by the copyright law from use without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law. Also, using or transformation of other person's portrait or name without his or her permission may violate the portrait right.
If brightness, color balance and focus point of whole image to be taken with 3D Sweep Panorama/Sweep Multi Angle/Sweep Panorama are radically different from those of the focused image, image may not be shot properly. ･ In the following cases, shooting for 3D Sweep Panorama/Sweep Multi Angle/Sweep Panorama may be stopped.
h Shooting screen and key operations ■ Still picture shooting screen d e a b f ❖Information c On the shooting screen, pinch-out/in or press m to zoom in/out. ･ To end the camera, tap Navigation bar, then tap x. ･ g h ■ Video shooting screen d e a Shooting still pictures b f c g h a b c d Recent shooting history ･ Touch the icon on the shooting screen and flick it to the left of the screen (up when in portrait view) to display the last 5 shots.
) Tap the shutter icon ( ) on the shooting screen. ･ To shoot still pictures using auto-focus function, touch and hold the shutter icon ( ) and release your finger when the focus frame turns green and sound beeps. A picture is taken as soon as you release the finger. If the focus frame turns red, auto-focus does not operate correctly. Shooting using Quick launch ■ Tapping the screen ❖Information ■ Tapping the shutter icon ( On the shooting screen, tap u[Capturing method]u[Touch capture]uTap the screen.
Adjusting Exposure value Setting face detection 1 On the shooting screen, tap the shooting mode icon (P.178), then tap [Normal]. 2 On the shooting screen, tap then [Exposure value]. 3 Tap or drag the bar to adjust the exposure value. 1 From the Home screen, tap [Camera]. ･ , Face detection You can use face detection to bring an offcenter face into focus. The camera automatically detects up to 5 faces at a time. A yellow frame indicates a face to focus on, and white frames indicate the rest.
3 Taking a photo using smile detection Shoot a picture. For information on how to shoot pictures, see "Shooting a still picture" (P.178). ･ Shot pictures are automatically saved in the internal storage/microSD card. ･ 1 Each detected face is framed (up to 5 faces). ･ The camera selects which face to focus on. A yellow frame shows the face in focus. ･ Smile detection Smile detection allows you to capture a face just as it smiles.
Capturing mode Item Icon Description Capturing Select the shooting method. mode Scene The camera determines recognition most suitable scene effect. A corresponding scene icon appears when the scene is recognized. Normal A standard shooting mode. Front P.182 camera P.183 3D Sweep Panorama Sweep Multi Angle Sweep Panorama Using Front camera to shoot pictures 1 From the Home screen, tap [Camera]. ･ and The still picture shooting screen (P.178) appears.
2 Using Sweep Panorama Use Sweep Panorama to shoot panoramic image with wide angle. Aligning the white frame on the screen with the black frame, move the camera slowly toward the set shooting direction to shoot. Using 3D Sweep Panorama allows you to shoot 3D pictures. ･ Photos shot with 3D Sweep Panorama cannot be displayed in 3D on the terminal. View them with a 3D compatible monitor using a microSD card etc.
3 Aligning the white frame with the black frame, slowly move the camera from left to right. If you change shooting direction for Sweep Panorama, slowly move the camera in the set direction. ･ Shot pictures are saved automatically in the internal storage/microSD card. 3 ･ ･ Changing the recording settings 1 From the Home screen, tap [Camera]. ･ 2 and The still picture shooting screen (P.178) appears. On the shooting screen, tap then tap item to set. , Tap an option in the selected setting.
Still camera setting Item Scenes Icon Description Use Scenes to quickly set up the camera for various scene conditions. Use when "Capturing mode" is set to "Normal". OFF Adjust color shade or brightness automatically. Portrait Settings are optimized to give brighter and warmer skin tones. Shoot landscape Landscape depicting trees with vivid color and focusing on distant objects. Night Shoot a crisp and clear scene night scene. Due to long exposure time, be careful not to shake camera.
Item Icon Description Panorama Set image size for 3D Sweep Panorama image size Use when "Capturing mode" is set to "3D Sweep Panorama". 16:9 16:9 aspect ratio. Suitable for viewing on widescreen. Standard size for Standard Panorama image. Suitable for Panorama shooting. Photo light Use the photo light to shoot when lighting conditions are poor or in backlight. On The photo light turns on. Off The photo light does not turn on.
Item ISO White balance Icon Description Set ISO sensitivity. Shoot clear picture reducing blur even in a place where lightning is poor. Use when "Capturing mode" is set to "Normal". Auto Set to the appropriate sensitivity between "100" and "800". 100 Set sensitivity to 100. 200 Set sensitivity to 200. 400 Set sensitivity to 400. 800 Set sensitivity to 800. The white balance setting adjusts the color balance according to the light source. Use when "Capturing mode" is set to "Normal".
Item Icon Description Geotagging Tag photos location information for the shooting spot. Enable "Enabling Wireless networks to find position" (P.209) or "Enabling GPS function" (P.209) in the location information service to add Geotag. For details on location information, see "Location services" (P.207). ･ Geotag (location information) enables to specify the shooting spot of the photo. On Location information is added to the taken photo. Off Shooting location cannot be viewed on a map.
･ Recording videos Recording Tap the start recording icon ( )/stop recording icon ( ) or recording screen to record video. For video recording screen, only landscape screen is supported. Recorded data is automatically saved in the internal storage/microSD card. 1 From the Home screen, tap [Camera]. ･ Using Front video camera to record 1 On the recording screen, tap the recording mode icon (P.178), then tap [Front video]. 2 Start/Stop recording. and Tap on the photo/video switch icon (P.
Video camera setting Changing the recording settings 1 From the Home screen, tap [Camera]. ･ 2 and Tap on the photo/video switch icon (P.178) to display the video recording screen. On the shooting screen, tap then tap item to set. , Several setting icons are displayed on the shooting screen in advance. The displayed setting icons change depending on the setting conditions. ･ For setting items and icons, see "Video camera setting" (P.190). ･ 3 Tap an option in the selected setting.
Item Video resolution Icon Description Full HD Full wide HD format with 16:9 aspect ratio. 1920×1080 pixels Use when "Capturing mode" is set to "Video camera". HD HD format with 16:9 720p aspect ratio. 1280×720 pixels Use when "Capturing mode" is set to "Video camera". VGA VGA format with 4:3 aspect ratio. 640×480 pixels QVGA VGA format with 4:3 aspect ratio. 320×240 pixels Use when "Capturing mode" is set to "Front video camera".
Item Metering Image stabilizer Icon Description Measure the brightness on the shooting screen to determine a well-balanced exposure automatically. Center Put emphasis at the center of the shooting screen and measure photometry at whole view finder to adjust the exposure. Average Adjust the exposure based on the brightness of the whole shooting screen. Spot Measure photometry only at the center of the shooting screen to adjust the exposure. Compensate for movements of the camera while recording a video.
Item Data storage Icon Description Set the saving location for recorded videos. Internal Save recorded videos in storage the internal storage. SD card Save recorded videos in a microSD card. ❖Note ･ Some settings cannot be used in combination with one another. Playing multimedia content Photos or videos that you took with the terminal or multimedia contents (music, photos, videos, etc.) saved in the internal storage or microSD card are viewed/played in "Media Player", "WALKMAN", "Albums", etc.
Copyright protected content Avoid copyright infringements when you handle photos, videos, or sound recorded using the terminal, e.g. copy/edit. In addition, avoid rights infringements of portraits by using these photos without consent, altering them or by other means. Note that capturing or recording a stage performance, entertainment or exhibition may be prohibited even if for personal use.
When you do not watch 1Seg, Stereo Headset with Microphone (Sample) can be used without the 1Seg antenna cable. ･ If receiving a call when using Stereo Headset with Microphone (Sample), music or 1Seg program stops, and the ringtone sounds. - If receiving a call when using Media Player, playing music resumes by tapping the play key on the Media Player screen after the call ends. - If receiving a call when using WALKMAN, playing music resumes when the call ends.
■ Album screen ■ b Still picture viewing screen c cd a def e a b a Pictures tab ･ Pictures are displayed in a list separated by months. b Maps tab ･ Geotagging images appear on a map. c Show album list d View optional menu e Online tab ･ Images in albums in synchronized online services. a My location info（location information） ･ For geotagged images, tap to view map.
❖Information Playing video 1 ･ 2 , A list of pictures appears. icon is displayed on the video files. Tap a video and tap ･ . Video is played. Operating image files Sharing image files You can share image files by attaching to Gmail or Email, uploading to Picasa or Google+, or sending to other devices via Bluetooth or infrared communication. 1 Tap an image file to share in the Album screen. 2 Tap the screen and 3 Select sharing method for image file.
Deleting image files 1 On the photo viewing screen/ video playing screen, tap the screen and tap u[OK]. ･ Image file is deleted. ❖Information ･ On the image file list screen, tap , tap [Select items], then select image file to delete. You can delete several files as a group. Using optional menu View slideshow, edit image, set image to phonebook entry or as wallpaper, check shooting date and time, etc. 1 2 On the photo viewing screen/ video playing screen, tap the screen and tap .
❖Information For movies with caption function which can display subtitles, "CC" appears on the playback screen in the landscape mode. Tap [CC] to set the caption function. ･ Playing YouTube videos in high quality 1 While playing a video, double-tap the screen to switch to the landscape screen. 2 Tap the screen to display the play control keys, then tap [HD]/[HQ]. ❖Information A video plays in high quality when Wi-Fi is connected.
Connecting the terminal to TV to watch photos and videos This terminal supports MHL connection. Using commercially available HDMI adapter etc., you can connect the terminal to an HDMI compatible TV. Connect to a TV to display photos and videos on the TV screen. 3 ❖Information ･ ･ ･ ･ Connecting to TV to activate an application by TV launcher 1 Connect the terminal with the Home screen or Application screen displayed to a TV using HDMI adapter.
･ Media Player ❖Information Play back videos and music stored on a microSD card using Media Player. ･ For information on how to copy music and video data from a PC, see "Using microUSB cable" (P.149). ･ For information on file formats of playable data, see "Playing multimedia content" (P.193). From the Home screen, tap then tap [Media Player]. ･ ■ You can change names of "Songs", "Artists" and "Albums" tabs.
■ Music playback screen ■ Video playback screen b b c a c d a e d e f e f g h i a b Back to song list Playback point ･ Appears when album art is tapped. c View optional menu d Album art e Show track information f Repeat OFF/Repeat ON/1 track repeat g Shuffle OFF/Shuffle ON h Go back to the beginning of the track or to the previous track/Play or pause/Skip to the next track i Volume control ･ Alternatively, press m during playback to adjust volume.
Editing songs in playlist Play list You can play back songs in the order you decided using playlist. 1 ･ Creating a playlist 1 From the Home screen, tap then tap [Media Player]. ･ 2 Drag up and down in song to change order and tap [Save]u[OK]. A song list appears. If playlists are not displayed, tap and tap [Settings]u[Arrange icons], and then touch and hold [Play list] to drag to any of [Songs]/[Artists]/[Albums] then tap [Apply] 3 Tap [Create new] and enter the access point name and tap [OK].
Setting up Timescape Timescape™ Timescape™ (hereinafter referred to as Timescape) displays various information such as Facebook, Foursquare, Twitter or mixi updates, etc. in chronological order. You can see a tile preview of events before choosing to view the full content. With (infinite button), you can view all communication information related to the registered contacts.（P.206） ❖Information ･ ･ ･ ･ ･ ･ ･ To make best use of Timescape, you can set up your social networking service (SNS) account.
Displaying tiles by service Timescape screen Apply filters to narrow tiles to display by service. a b c 1 Filter Icon d a b View optional menu Latest comment ･ Display the latest comments posted to Facebook/ Foursquare/Twitter/mixi. c Tile ･ Display various information such as Facebook, Foursquare, Twitter or mixi friends updates in chronological order. d Filter ･ Tap a filter icon to narrow the information down to a certain type. ･ Display order of filters may differ.
Posting to Facebook, Foursquare, Twitter, mixi from Timescape 1 On the Timescape screen, tap and tap [Update status]. 2 Mark the service you want to post and tap [Continue]. Enter the text and tap [Post]. 3 Tile icons The following icons on a tile indicate a type of event. Icon Event A Facebook update. Tap the tile to display the update. A Foursquare update. Tap the tile to display the update. A Twitter update. Tap the tile to display the update. A mixi update. Tap the tile to display the update.
Timescape settings Displaying the Timescape setting screen 1 On the Timescape screen, tap and tap [Settings]. ･ You can set the following operations. Set your Facebook/Foursquare/ Twitter/mixi account information to be updated manually/automatically when Timescape is activated. Timescape™ Change a content type displayed in content Timescape. Set up services Set Facebook/Foursquare/Twitter/ mixi account or search new service of Timescape.
Use the GPS system with great care. DOCOMO is not liable for any damage caused by abnormality of the system. ･ Note that DOCOMO shall have no liabilities for any purely economic loss including those due to missing a chance to check the measurement (communication) results because of external factors (including the running out of the battery), such as a failure, malfunction, or any other problems of the terminal or the power failure.
❖Note If some of the GPS functions are not available, or if none of them are, check that your contract includes the use of the Internet, and see "Wireless & networks" (P.112). ･ NTT DOCOMO is not liable for navigation services or for the accuracy of location services. ･ 5 [Google's location service] checkbox is marked. ･ Wireless network users' location information is stored without specifying who they are. Some location information is stored even when the application is not running.
1 2 From the Home screen, tap Tap [Maps]. ･ ･ . If a message appears, tap [OK]. A map screen appears. Finding the current location on the map 1 On the map screen, tap Searching for a location you want to look at 1 2 On the map screen, tap Fill out the search box. 3 Tap 4 Tap a destination. . The blinking blue arrow shows the current location. ･ If you tap , the terminal's geomagnetic compass links the direction displayed on the map.
Zooming in or out on a map 1 Pinch out or in. ❖Information ･ Alternatively, double-tap the screen to zoom in. Changing the layers Receiving guides Google Maps helps you receive detailed guides for your destination. 1 2 You can select information to overlay on the map. 1 2 On the map screen, tap . Tap the information you want to view. ･ Traffic information and routes are not available in all locations. Traffic Satellite Terrain Transit Lines Latitude My Maps Wikipedia Show traffic condition.
Clearing the Maps Joining Latitude Clear displayed layers, route search results and some others. 1 1 On the map screen, tap [Clear Map]. ･ ･ and tap If there is nothing to clear, "Clear Map" is displayed in light gray. Checking where a friend is by Google Latitude Google Latitude enables you to share location information with your friends on the map. You need to set up a Google account (P.
Creating a schedule in Calendar Calendar The terminal has a built-in calendar for the schedule. If you have a Google account, you can synchronize the terminal's calendar and web calendar. See "Accounts & sync" (P.134). ･ When you register Google account, tap the Google account displayed in "Accounts & sync" and a sync item "Sync Calendar". You can create schedule etc. Setting the calendar view 1 2 From the Home screen, tap , then tap [Calendar]. Tap [Month]/[Week]/[Day] to select.
Viewing schedule in Calendar 1 From the Home screen, tap then tap [Calendar]. , Flick the calendar left or right to display the next or previous month/week/day according to the view mode. ･ Tap to display date and time set on the terminal. ･ Pinch out/in on the weekly or daily schedule screen to zoom in/out calendar. ･ 2 Tap a schedule you want to display.
Changing calendar settings Alarm & clock Set Calendar view, reminder notifications, ringtone, vibration, reminder time. 1 2 3 From the Home screen, tap then tap [Calendar]. Tap and tap [Settings]. Select an item to change. , With "Alarm & clock" application, you can set an alarm and use world clock, stopwatch and timer. 1 2 From the Home screen, tap Tap [Alarm & clock]. e f . g h a b c d a b c d e f g h i i Clock display ･ Tap to view date and time (P.146) setting screen.
3 Setting alarm 1 From the Home screen, tap then [Alarm & clock]. ･ 2 , The alarm list screen appears. Tap [Add alarm]. An alarm setting screen appears. You can set the following items. ･ Tap [Advanced alarm settings] to view all setting items. ･ Set time. Set a day of the week for the alarm. Set alarm sound. Set time interval to sound the ringtone again after stopping the ringtone. Alarm text Enter texts that appear while alarm is sounding.
Stopping an alarm while the alarm is sounding 1 While alarm is sounding, touch and hold and drag it to the right. ❖Information Display the date and time in cities around the world. From the Home screen, tap then [Alarm & clock]. 2 Tap [World clock]. 3 4 Tap [Add city]. Select a city. ･ , The list screen of the world clock appears. ❖Information Tap to display date and time set on the terminal in full screen.
Using Stopwatch 1 From the Home screen, tap then [Alarm & clock]. 2 3 4 Tap [Stop]. Using Timer , 1 From the Home screen, tap then [Alarm & clock]. Tap [Stopwatch]. Tap [Start]. 2 Tap [Timer]. Measurement starts and appears in the status bar. ･ Tap [Lap] to measure elapsed time. 3 4 Tap [Set time]. Flick number up and down to adjust the time and then tap [Set]. 5 Tap [Start]. 6 Tap [Stop]. ･ ･ ･ Tap [Start] to resume measuring. Tap [Reset] to delete measured time and lap time.
Backing up SD card backup Move or back up data such as phonebook entries, sp-mode mails, bookmarks, etc. using external memory such as microSD card. ･ Do not remove the battery pack or microUSB card during backup or restoring. Doing so may damage the terminal data. ･ If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore. ･ docomo apps password is required to back up or restore.
Restoring 1 From the Home screen, tap then tap [SD card backup]. ･ 2 3 4 5 When you use for the first time, agree to "License agreement". Tap [Restore]. Tap [Select] on data type, mark checkboxes for data to restore, and tap [Select]. ･ Tap [Select latest data] to select the latest data for each data type. Tap [Add]/[Overwrite] to select restore method and tap [Start restore]u[OK]. Enter docomo apps password and tap [OK]. ･ Backed up data is restored.
OfficeSuite With OfficeSuite, you can view files of Word, Excel, etc. from the terminal or a microSD card. ❖Information Some files may not be viewed properly due to corrupted layouts. ･ Starting OfficeSuite 1 2 From the Home screen, tap Tap [OfficeSuite]. ･ . OfficeSuite starts. ❖Information ･ When you activate for the first time, a screen for register name etc. appears. Select [Register later] or [Register now].
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 4. The terminal works in a 3G roaming area and GSM/GPRS service area.
Before using Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page of this manual. For AC adapter for charging overseas travel, use AC Adapter 03 (optional). Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. ･ Some applications automatically perform packet communications.
After arriving overseas When you arrive overseas and turn on the terminal, an available network is automatically set. Connectivity When you have set search mode of "Available networks" to "Automatic" in "Service providers" settings, optimized network is automatically selected. When you connect to the network operator conducted in flat-rate service, you can use the service with flat-rate packet communication charges overseas up to the specified upper limit per day.
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ･ Set "Network Mode" to "LTE (preferred)/ WCDMA/GSM". (P.226) ･ Set "Search mode" to "Automatic" in "Service providers" settings. (P.225) Making setting for international use When you start the international roaming or move out of your operator's network, you need to reconnect the terminal to another available network.
Changing network mode settings You can change network mode settings according to the network mode (communication method) adopted by the overseas network operator. 1 From the Home screen, tap then tap [Settings]. 2 Tap [More...]u[Mobile networks]u[Network Mode]. Select a network mode you use. 3 ･ , You can select from [LTE/WCDMA], [GSM only] and [LTE (preferred)/ WCDMA/GSM]. If you select [LTE (preferred)/WCDMA/GSM] to switch available network automatically.
2 Dial + (touch and hold [0])uCountry codeuArea code (City code)uEnter a phone number. If the area code begins with "0", omit "0". However, "0" may be required to dial to some country or area such as Italy. ･ To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code. ･ 3 Tap . ❖Information ･ During international roaming, if you make an international call to Japan using DOCOMO's phonebook application, the "International dialing assist" screen appears.
1 While receiving a call, touch and hold (left) and drag it to (right). 2 When the conversation is finished, tap [End call]. International roaming settings Make settings for using international roaming or international calls. ❖Information ･ When you received a call during the international roaming, regardless of which country the call is from, it is forwarded internationally from Japan. A caller is charged for a call fee to Japan, and the receiver is charged for a reception fee.
Setting incoming notification on roaming 1 From the Home screen, tap then tap . 2 Tap [Call settings]u[Roaming settings]. Tap [Incoming notification on roaming]. 3 ･ Check settings , Select items you want to use. Activate incoming call notification Deactiv. incoming call notification Check settings Tap [OK] to activate roaming incoming call notification. Tap [OK] to deactivate roaming incoming call notification. Check the current service settings. 1 From the Home screen, tap then tap .
1 From the Home screen, tap then tap . 2 Tap [Call settings]u[Roaming settings]. Tap [Network service]. 3 ･ , Select items you want to use. You need to set "Remote access" to activate. Voicemail Activate (charged) Voicemail (roaming) Deactivate Voicemail (roaming) Play Voicemail message (roaming) Voicemail settings (roaming) Voicemail ring time (roaming) Incoming call notific. (charged) Caller ID request (charged) Roaming guidance (charged) Remote operation (charged) Call Activate call Tap [OK].
Appendix/Index Optional and related devices A variety of commercially available optional devices allows you to expand the terminal's capabilities by supporting a wide range of purpose, including personal and business uses. Some accessories are only available in some areas. For details, please contact a sales outlet such as docomo Shop. For details on optional devices, see the user's manual of each device.
If you execute calls, communications or − other function operations for a long time while charging, the terminal may become hot and the battery status icon may not indicate charging (charging stops) or charging may not be completed. In this case, wait until the temperature of the terminal drops and charge again. The notification LED blinks in red and cannot operate the terminal. ･ When the battery level is low, charge the P.26 battery. ･ ■ Terminal operation Become hot while operating/charging.
The clock is not on time. ･ The clock time may become wrong while turning on the power for a long time. Check if "Automatic date & time" is set to on and turn the power off and on in a place with strong radio wave conditions. The terminal operation is unstable. ･ Instability may be caused by applications that you installed after purchasing the terminal. If the symptom is improved when you boot the terminal in safe mode (near default state), uninstalling the installed application may improve the symptom.
･ Due to the crossing of radio waves, at the crowded public places, calls/mails are crossed and the connection status may not be good. Move to other place or call again at other time. ■ Display The display is dim. ･ Check if the backlight time-out is set. ･ Check if the brightness of screen is changed. ･ Check if you activate eco モード (eco mode). ･ Check if you cover the Proximity sensor with sticker etc. ･ When the temperature of the terminal becomes high while using, the display may become darker.
■ International roaming Cannot use the terminal overseas. ■ When antenna mark is displayed ･ Do you subscribe WORLD WING? − Check if you subscribe WORLD WING. ■ Out of service area indicator appears ･ Check if you are out of the international P.224 P.225 P.226 P.30 roaming service area or in an area with poor signal strength. Check if the service area and network operator are available, referring to "Mobile Phone User's Guide [International Services]" or DOCOMO International Services website.
■ Bluetooth function The terminal cannot be connected to a Bluetooth communication device/A Bluetooth communication device cannot be found from the terminal. ･ Make Bluetooth communication device P.157 (commercial item) registering stand-by state and then register the device on the terminal.
Smartphone Anshin Remote Support By sharing screens of your terminal with NTT DOCOMO, you can receive technical support to make settings (in Japanese only). ･ This service is not available when your docomo mini UIM card is not inserted, during international roaming, or in Airplane mode. ･ Smartphone Anshin Remote Support is a service requiring subscription. ･ Some operations and settings are not supported. ･ For details on Smartphone Anshin Remote Support, refer to NTT DOCOMO website.
repaired at the owner's expense, even if the warranty period is still effective. ･ Malfunction due to use of devices and consumable parts other than those specified by DOCOMO will only be repaired at the owner's expense, even if the warranty period is still effective. After Sales Services If you have problems with the terminal Before asking repair, see "Troubleshooting" (P.231) in this manual to check the problem.
■ Parts stock period The functional parts necessary to repair the terminal will be basically available for a minimum of six years after the manufacture is discontinued. However, depending on the defective portion, repair may not be possible because of a shortage of repair parts. Note that repair may still be possible depending on the defective portion even if the stock period has expired. Contact "Repairs" on the last page of this manual (in Japanese only).
● If inside of the terminal gets wet or moist, turn the power off, remove the battery pack immediately, and bring the terminal to a repair office as soon as possible. However, repair may not be possible depending on the condition of the terminal. Precautions on memory dial (Phonebook function) and downloaded data Note that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal.
3 Mark [Notifications] checkbox. ･ To change the notification tone, tap [Notification tone], then tap notification tone you want to change, and then tap [Done]. ❖Information If you mark [Notification vibration] checkbox in Step 3, Software update is notified by vibration. ･ Downloading software updates wirelessly ･ "New apps"/"Updates" tabs in the Update Center screen are not available because the services are not provided in Japan.
❖Note Note that if you tap from the Home screen, then tap [Update Center] and then tap [Settings]u[Preffered data traffic] and then select [Via mobile network/Wi-Fi] in the Preffered data traffic screen, a Wi-Fi connection automatically switches to mobile network communications when the Wi-Fi connection is unstable and packet communication fee may apply. ･ Note that packet communication fee may apply for searching automatically.
Main specification ■ The terminal SO-02E Approx. 115mm (H)× approx. 54mm (W)× approx. 9.4mm (T) (Thickest part : Approx. 9.4mm) Weight Approx. 95g (with battery) Storage ROM 8GB RAM 1GB External storage Compatible with microSD card of up to 2GB, and microSDHC card of up to 32GB (as of July, 2012). Continuous FOMA/3G Approx. 360 hrs. stand-by (stationary) time GSM Approx. 280 hrs. (stationary) LTE Approx. 240 hrs. (stationary) Continuous FOMA/3G Approx. 350 min. call time GSM Approx. 360 min.
Video recording size Frame rate Wireless LAN Bluetooth Video camera : 1920×1080 (Full HD) 1280×720 (HD 720p) 640×480 (VGA) Front video camera : 640×480 (VGA) 320×240 （QVGA） Max. 30 fps Compliant with IEEE802.11a*1/b/g/n (Corresponding frequency band to IEEE802.11n : 2.4GHz/5GHz) Compliant with Bluetooth standard Ver. 3.1*2 Supported Bluetooth version Radio power Bluetooth standard Power Class 1 Within approx.
･ Charging time is an estimate of the time required to charge a completely empty battery pack. ■ Battery Pack Product name Battery type Voltage Current ■ Battery Pack SO06 Lithium Ion Battery DC3.7V 1500mAh File format The terminal supports the display or playback of the following file format: Type Sound Still image* Video File format WAV (PCM, G.711) (.wav), AAC (.3gp, .m4a, .mp4), AAC+ (.3gp, .m4a, .mp4), eAAC+ (.3gp, .m4a, .mp4), MP3 (.mp3), AMR-NB (.3gp), AMR-WB (.
End User Licence Agreement End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors. Sony Mobile grants you a non-exclusive limited licence to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
About Open Source Software About Open Source Software This product includes certain open source or other software originating from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses, disclaimers and notices. The exact terms of GPL, LGPL and some other licenses, disclaimers and notices are reproduced in the about box in this product and are also available at http:// opensource.sonymobile.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
"Xperia", "Timescape" and "Live Ware" are trademarks or registered trademarks of Sony Mobile Communications AB. ･ "Media Go" is a trademark or registered trademark of Sony Media Software and Services. ･ "PlayStation" and " " are trademarks or registered trademarks or Sony Computer Entertainment Inc. ･ "BRAVIA", "Sony", "Sweep Multi Angle", "Sweep Panorama", "WALKMAN", "xLOUD", "FeliCa" and "Reader" are trademarks or registered trademarks of Sony Corporation.
･ Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content.
SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ･ The SIM unlock service is provided at a docomo Shop. ･ A SIM unlock charge is separately required. ･ If you use a SIM other than by DOCOMO, LTE system is not available. Available services and functions will be limited. DOCOMO is not liable to any failures or malfunctions. ･ For details of SIM unlock, refer to NTT DOCOMO website.
Index A About phone ････････････････････････ 148 Access point Block access point change ････････････ 123 Initializing ･････････････････････････ 124 Setting････････････････････････････ 122 Accessibility ･････････････････････････ 148 Account setting Facebook･･････････････････････････ 136 Google ･･･････････････････････････ 134 Removing ･････････････････････････ 137 Accounts & sync ･･････････････････････ 134 Auto-sync ･････････････････････････ 137 Adjusting sound volume ･･･････････････ 125 Airplane mode ･･･････
Declining ････････････････････････ 79, 80 Ending a call ････････････････････････ 78 Hold･･･････････････････････････････ 81 Making ･････････････････････････ 77, 80 Mute ･･････････････････････････････ 81 Receiving ･･･････････････････････ 78, 80 Speaker ････････････････････････････ 81 Call forwarding service ･･････････････････ 84 Call history ･･･････････････････････････ 82 Adding to Phonebook ････････････････ 83 Deleting ･･･････････････････････････ 83 Making a call ････････････････････････ 83 Call notification
Forwarding ････････････････････････ 102 Initial settings ･･･････････････････････ 99 Receiving ･････････････････････････ 101 Replying ･･････････････････････････ 102 Saving attachment file ･･･････････････ 102 Sending ･･･････････････････････････ 100 Email account Adding ･･･････････････････････････ 104 Changing ･････････････････････････ 103 Deleting ･･････････････････････････ 104 Emergency call ････････････････････････ 77 English guidance ･･････････････････････ 84 H Facebook････････････････････････････ 136 FM
J Japanese syllabary keyboard ･････････････ 49 K Keys ･････････････････････････････････ 36 Kisekae ･･････････････････････････････ 63 Koe-no-Takuhaibin ･････････････････････ 84 L Landscape view ･･･････････････････････ 38 Language & input ･････････････････････ 145 Let's start PSM･････････････････････････ 69 Light sensor ･･････････････････････････ 22 Link ････････････････････････････････ 110 Location services ････････････････ 138, 207 Location-based Wi-Fi ･･････････････････ 122 M Machi-chara ･･･････････････
P PC Companion ･･････････････････ 150, 242 Personal ････････････････････････････ 134 Personal Unblocking Key (PUK code) ･････ 141 Phone language ･･････････････････････ 145 Phonebook ･･･････････････････････････ 85 Accounts to display ･･････････････････ 88 Adding a new entry ･･････････････････ 86 Combining ･････････････････････････ 90 Communication ･････････････････････ 85 Contacts display order ････････････････ 87 Deleting ･･･････････････････････････ 90 Editing ･････････････････････････････ 89 Exporting ････
Setup guide ･･････････････････････････ 31 Shabette concier･･･････････････････････ 67 Shabette-Key-Nyuryoku ･････････････････ 40 Shooting still pictures ･････････････････ 178 Silent mode･･････････････････････････ 126 SIM card lock ･････････････････････････ 141 Software keyboard ･････････････････････ 41 Software update ･･････････････････････ 240 Sound ･･････････････････････････････ 125 Specific Absorption Rate of Mobile Phone ････････････････････････････････････ 246 Specification ･････････････････････････ 2
Adjusting settings ･･････････････････ 110 Closing ･･･････････････････････････ 109 Copying text ･･･････････････････････ 109 Displaying ･････････････････････････ 109 Exiting ････････････････････････････ 109 Going back to the previous page ･･････ 108 Moving ･･･････････････････････････ 108 Opening ･･････････････････････････ 108 Searching text･･････････････････････ 109 Setting home page ･･････････････････ 110 Switching tabs ･････････････････････ 109 Zooming in/out ････････････････････ 109 Web history ･･･････････
Make various applications or charge your billing plan, check your charges and points, and more online. sp-mode: dmenu ⇒ " お客様サポートへ (To Customer support)" ⇒ " 各種お申込・お手続き (Various applications/procedures)" PC: My docomo (http://www.mydocomo.com/) ⇒ 各種お申込・お手続き (Various applications/procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged. * "docomo ID and password" are required for use.
General Inquiries 0120-005-250 (toll free) Repairs *Service available in: English, Portuguese, Chinese, Spanish, Korean. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Unavailable from land-line phones, etc.
