User's Manual

154
File management
❖
Information
･
From the Home screen, tap and tap
[Settings]
u
[Xperia
™
]
u
[Connectivity] to display
"Host name" (PC name) in the "TRUSTED DEVICES"
field. To cancel connection setting, tap the host
name and [Forget]. Until "Forget" is tapped, the
connection setting retains even if you connect/
disconnect repeatedly by coming in and out of a Wi-
Fi area.
･
If the privacy separator function for Wi-Fi network
(access point) is enabled, pair setting cannot be
made.
The Media Go computer application helps
you transfer and manage media content in
the terminal and PC.
With Media Go, you can load music from a CD
to a PC and transfer to the terminal.
･
You can install Media Go from PC Companion.
Activate PC Companion installed in a PC and
install Media Go with "Sony PC Companion"
screen. For information on how to install PC
Companion, see "When PC Companion is not
installed on your PC" (P.242).
❖
Information
･
You can also download Media Go from http://
mediago.sony.com/enu/features.
･
To learn more about how to use the Media Go
application, see the help section of the Media Go
application.
You can send/receive data of contacts,
photos or videos taken by the camera to/
from terminals etc. supporting infrared
communication function.
･
The communication range for infrared
communication is 20 cm or less. Keep the
devices pointing at the infrared data port
each other, and do not move them until data
exchange completes.
･
If the infrared data port is soiled, clean the
data port with a dry soft cloth to prevent from
scratching. Performing infrared
communication with the data port soiled or
scratched may cause communication failure.
･
Infrared communication may not be
performed in areas exposed to direct sunlight,
directly under fluorescent lights or near
infrared devices.
･
Depending on the terminal of the other party,
it may be difficult to exchange data.
Using Media Go
Using infrared
communication