User's Manual

158
File management
1
From the Home screen, tap ,
then tap [Settings].
2
Tap in Bluetooth or drag it
right.
･
appears on the status bar and
Bluetooth function turns on.
3
Tap [Bluetooth].
4
Tap [SO-02E].
･
The terminal becomes detectable by
other Bluetooth devices for 2 minutes.
You can name the terminal. The name
appears on Bluetooth devices when you use
the Bluetooth function.
1
Make sure that the Bluetooth
function is on.
2
From the Home screen, tap Tap
[Settings]
u
[Bluetooth].
3
Tap and tap [Rename phone].
4
Enter a name.
5
Tap [Rename].
By making pair setting for the terminal and
another Bluetooth device, you can use the
device such as Bluetooth handsfree headset
etc. connecting to the terminal to make and
receive calls.
Once you have made pair setting for the
terminal and a Bluetooth device, the setting
is saved. When making pair setting for the
terminal and a Bluetooth device, you may
need to enter a passkey (PIN). The terminal
automatically tries the generic passkey
"0000". If this passkey does not work, see the
documentation of your Bluetooth device. You
do not need to re-enter the passkey the next
time you connect to a paired Bluetooth
device already set.
You cannot pair the terminal with two
Bluetooth headsets. However, you can pair
the terminal with two or more Bluetooth
devices of different profiles. The terminal
supports the following Bluetooth profiles:
A2DP, AVRCP, HFP, HID, HSP, OPP, PAN, PBAP,
and SPP.
1
Make sure that the Bluetooth
function is on.
Making the terminal detectable
with the Bluetooth function on
Entering the terminal's name
Making pair setting for the
terminal and Bluetooth device