User's Manual

165
Applications
transfer of data, contact Osaifu-Keitai
compatible service providers. For important
data, be sure to use a service with backup
service.
･
If the data in the IC card is lost, modified or
damaged by any means related to Osaifu-
Keitai compatible service such as malfunction
or model change, DOCOMO assumes no
responsibility for the loss of data.
･
If the terminal is stolen or misplaced,
immediately contact Osaifu-Keitai
compatible service provider for an advice.
･
The terminal does not support iC transfer
service.
1
From the Home screen, tap
then tap [Osaifu-Keitai].
2
Select a service you want to use
from a service list.
･
At the first time you activate Osaifu-
Keitai, an initial setting screen appears.
Follow the onscreen instructions.
You can exchange data with an IC card reader
only by holding mark over the card reader.
･
When holding mark over an IC card reader,
make sure not to hit the terminal strongly.
･
Hold mark horizontally over the center of
the IC card reader.
･
Slowly move the terminal to hold mark
over the IC card reader.
･
If mark is not recognized even when
holding over the IC card reader, try slightly
picking the terminal up off the reader, or
moving the terminal back, forth and around.
･
If there are metal objects between mark
and an IC card reader, scanning may be failed.
And note that a sticker put on nearby the
mark may affect communication
performance.
Using Osaifu-Keitai
Holding Osaifu-Keitai over IC
card reader