User's Manual

236
Appendix/Index
■
International roaming
■
Data management
Cannot use the terminal overseas.
■
When antenna mark is displayed
･
Do you subscribe WORLD WING?
Check if you subscribe WORLD WING.
−
■
Out of service area indicator appears
･
Check if you are out of the international
roaming service area or in an area with
poor signal strength. Check if the service
area and network operator are available,
referring to "Mobile Phone User's Guide
[International Services]" or DOCOMO
International Services website.
･
Change the network settings or overseas
network operator settings.
Set "Search mode" to "Automatic" in
"Service providers" settings.
Set "Network Mode" to "LTE (preferred)/
WCDMA/GSM".
･
Turning off the terminal and then
turning on again may work for the
restoration.
P. 2 2 4
P. 2 2 5
P. 2 2 6
P. 3 0
Cannot perform data communication overseas.
･
Mark the data roaming checkbox. P.226
The terminal suddenly became unavailable while
using overseas.
･
Check if usage amount exceeds the limit
of maximum charges for use.
For use of "International roaming
(WORLD WING)", the limit of maximum
charges for use is set in advance. If
exceeding the limit of maximum charges
for use, pay the charges.
−
Cannot receive calls overseas.
･
Is "Restricting incoming calls" set to
"Activate restricting"?
P. 2 2 8
No caller ID is notified/A notified caller ID is
different from that of the caller/Functions for using
contents saved in phonebook or those using Caller
ID notification do not operate.
･
Even if a caller notifies its caller ID, it is
not displayed on the terminal unless the
network or network operator notifies it.
And a different caller ID may be notified
depending on the network or network
operator you use.
−
Data transfer is not performed.
･
Check if USB hub is used. If you use USB
hub, operations may not be performed
correctly.
−
Data saved in microSD card is not displayed.
･
Remove the microSD card and insert it
again.
P. 2 4
When trying to display an image, "
×
" appears
instead of it.
Or "
×
" appears for the demo play or the preview
function.
･
"
×
" may appear instead of destroyed
image data.
−