User's Manual

237
Appendix/Index
■
Bluetooth function
No service
･
The terminal is out of service area, or the
received signal is too weak. Move to a location
where radio signal can be reached.
･
The docomo mini UIM card is not working
properly.
Insert the docomo mini UIM card in another
terminal. If this works, it is probably the
terminal that is causing the problem. In this
case, contact "Repairs" on the last page of this
manual (in Japanese only).
Removing and inserting docomo mini UIM
card may improve the problem.
SIM card is locked
Enter your PIN code (P.140) correctly.
SIM card is PUK-locked
Enter your PUK (Personal Unblocking Key)
(P.141) correctly.
The phone storage is full
There is no memory space. Delete
unnecessary applications (P.132) to obtain
memory space.
The terminal cannot be connected to a Bluetooth
communication device/A Bluetooth
communication device cannot be found from the
terminal.
･
Make Bluetooth communication device
(commercial item) registering stand-by
state and then register the device on the
terminal. If you delete already registered
device and register the device again as a
new device, delete the registrations on
both Bluetooth communication device
(commercial item) and the terminal and
then perform registration of the devices.
P. 1 5 7
Calls cannot be made from the terminal connecting
to external device such as car navigation or
handsfree device.
･
If calls are made several times when the
other party does not answer or is out of
service, the call to this number may be
disabled. In this case, turn terminal off
and on.
−
Error messages