User's Manual

30
Before Using the Terminal
1
Insert the microUSB cable
horizontally with the microUSB
plug engraved side facing up
into the microUSB connecting jack
of the terminal.
2
Insert the USB plug of the
microUSB cable horizontally into
the USB port of a PC.
･
When "PC Companion software" screen
appears on the terminal, tap [Skip].
･
When a screen for new hardware
detection etc. appears on the PC, select
[
キャンセル
(Cancel)].
3
When the charging is complete,
remove the microUSB plug of the
microUSB cable from the terminal.
4
Remove the USB plug of the
microUSB cable from the USB port
of the PC.
❖
Note
･
Installation of MTP driver to a PC is required to charge
the battery with a Microsoft Windows XP PC, since
"USB connection mode" is set to "Media transfer
mode (MTP)" by default. Install Windows Media
Player 10 or later to install MTP driver.
･
If the microUSB cable is connected into the USB
connecting jack for charging etc., the terminal is
automatically powered on although the operations
are not available. Be careful not to connect the
microUSB cable in a place where the use is
prohibited such as in a airplane or hospital.
･
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
Charging with a PC