User's Manual

135
Apps
1
From the Home screen, tap
then tap [Osaifu-Keitai].
2
Select a service you want to use
from a service list.
･
Download an application compatible
with service site or service.
･
You can exchange data with an IC card
reader only by holding mark over
the card reader.
❖
Information
･
If you do not make the initial setting for Osaifu-Keitai
in the initial setting for DOCOMO services (P.38), the
initial setting screen appears in Step 2. Follow the
onscreen instructions.
･
You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･
The function is available even if the terminal is off,
but it is not available when the battery is not
attached. Even if the battery is attached, it may not
be available if the terminal is off for a long while or
battery is low.
･
You can use Osaifu-Keitai compatible service even
when the PIN code cannot be unlocked or PIN
locked.
･
Note that when you do not subscribe sp-mode,
some functions of Osaifu-Keitai compatible service
may not be available.
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
[NFC/Osaifu-Keitai
settings]
u
[Reader/Writer,
P2P]
u
[OK].
･
"Reader/Writer, P2P" and "Android
Beam" are marked.
･
NFC Reader/Writer, P2P function is
enabled, and appears in the status
bar.
3
Hold the mark over a device
with the NFC module or a smart
poster.
Using "
おサイフケータイ対応サー
ビス
(Osaifu-Keitai compatible
service)"
Using "
かざしてリンク対応サービ
ス
(Kazashite-Link compatible
service)"