User's Manual

136
Apps
･
When holding mark over the other device,
make sure not to hit the terminal strongly.
･
Hold the mark over parallel to the center of
the other device.
･
Slowly put the terminal close to the other
device when holding mark.
･
If mark is not recognized even when
holding over the device, try lifting the
terminal slightly, or moving the terminal back,
forth and around.
･
If there are metal objects between mark
and the other device, scanning may be failed.
And note that putting the terminal in a case or
cover may affect communication
performance.
Use "NFC/Osaifu-Keitai lock" settings to
restrict the use of Osaifu-Keitai function and
related services.
･
NFC/Osaifu-Keitai lock is different from screen
lock for the terminal, SIM card lock.
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
Tap [NFC/Osaifu-Keitai
settings]
u
[NFC/Osaifu-Keitai
lock].
3
Enter a password, then tap [Next].
･
When using "NFC/Osaifu-Keitai lock" for
the first time, enter a password to set.
Set security question and answer in
case you forget the pattern following
the onscreen instructions.
･
Osaifu-Keitai function is locked, and
or is displayed in the status bar.
❖
Information
･
Note that you cannot cancel "NFC/Osaifu-Keitai lock",
if the battery runs out while "NFC/Osaifu-Keitai lock"
is set. Be careful about remaining battery level. If you
cancel "NFC/Osaifu-Keitai lock", charge the terminal
before canceling.
･
You need to unlock to use Osaifu-Keitai menu while
"NFC/Osaifu-Keitai lock" is set.
･
"NFC/Osaifu-Keitai lock" password is not be deleted
even if you reset the terminal.
Notes on holding the mark over
the other device such as a
reader or device with the NFC
module
Locking Osaifu-Keitai function