User's Manual

139
Apps
Broadcast wave and service area
The radio wave received via Mobacas differs
from that of received via Xi/FOMA service
and 1Seg. For this reason, the signal cannot
be received at places where the Mobacas
broadcast does not reach or while
broadcasting is out of service, regardless of
whether the terminal is outside or inside the
Xi/FOMA service area.
Also, in the following places, the signal status
may become weak or the signal may not be
received even if the terminal is inside the area
of Mobacas broadcasting service.
･
Places that are far from the base station that
sends signal
･
Mountain-ringed regions or a place between
buildings where airwaves are interrupted by
geography or buildings
･
Tunnel, underground or far back from a
building where airwaves are weak or do not
reach
Mobacas/1Seg antenna
･
Pull out the Mobacas/1Seg antenna
thoroughly until it fixed.
･
Mobacas/1Seg antenna can be rotated 360
degrees. Rotate it toward a direction for good
signal reception.
❖
Information
･
To operate Mobacas/1Seg antenna, be careful about
the followings.
- To change the direction of Mobacas/1Seg
antenna, hold around the root of Mobacas/1Seg
antenna and confirm the direction.
- For stowing, shorten Mobacas/1Seg antenna and
direct it straight and then stow it with careful
attention to the orientation of top of Mobacas/
1Seg antenna.