User's Manual

181
Apps
･
Some wireless communications products
(mobile phone, data detectors and some
others) block satellite signals and also causes
instability of signal reception.
･
Some map displays based on location
information (latitude/longitude information)
may be not accurate due to some countries'
or regions' regulations.
■
Where radio waves are difficult to
receive
Note that radio waves may not be received
or it may be difficult to receive radio waves
in the following conditions, since GPS uses
radio waves from a satellite.
･
Inside or immediately under a building
･
Inside a bag or box
･
Inside or under a thick covering of trees
･
In a car, inside a train compartment
･
When there are obstructions (people or
objects) near the terminal
･
Inside a basement or tunnel, and below
the ground or water
･
In buildings-clustered or residential area
･
Near a high-voltage cable
･
Bad weather such as heavy rain or snow
❖
Note
･
If some of the GPS functions are not available, or if
none of them are, check that your contract includes
the use of the Internet, and see "Wireless & networks"
(P.193).
･
NTT DOCOMO is not liable for navigation services or
for the accuracy of location services.
Activating GPS/Location services
You can position current location using GPS,
Wi-Fi or information sent from base stations
of mobile network.
1
From the Home screen, tap ,
then tap [Settings].
2
Tap [Location services].
3
Tap or drag right for Access
to my location.
4
Read note on GPS location services
and tap [Agree], then read
Location consent and tap [Agree].
･
"GPS satellites" and "Google's location
service" are marked.
❖
Information
･
The note for location information may appear in Step
4.
･
Alternatively, drag the status bar downwards and tap
[GPS] to turn on/off GPS. To activate, read the note on
GPS location services and tap [Agree].