User's Manual

210
Settings
Formatting USB storage
･
Insert external memory such as a microSD
card into commercially available reader/writer
cable and connect the cable to the terminal in
advance.
1
From the Settings screen (P.193),
tap [Storage].
2
Tap [Clear USB storage]
u
[Erase].
･
Enter your screen unlock method as
required.
3
Tap [Erase everything].
❖
Information
･
Formatting USB storage (external memory such as
microSD card) deletes all the data in it.
Increasing the available memory of
the terminal
If the terminal has a small memory, you can
perform the following operations to increase
available memory.
･
In the browser, you can clear all temporary
Internet files and browser history information.
For details, see "Clearing history" (P.130).
･
Uninstall programs that you no longer use. For
details, see "Deleting installed application"
(P.212).
You can check battery consumption and set
Power Saver or Location-based Wi-Fi.
Using Location-based Wi-Fi
When entering to the registered Wi-Fi
network area, the terminal connects the Wi-Fi
network automatically to reduce the battery
power consumption.
1
From the Settings screen (P.193),
tap [Power management].
2
Tap of Location-based Wi-Fi
or drag it to the right.
･
When Wi-Fi network is not registered,
tap [Location-based Wi-Fi]
u
[Set up Wi-
Fi] to connect to Wi-Fi (P.194).
Power management
Power Saver Set Power Saver to reduce
battery power consumption.
Location-based
Wi-Fi
P. 2 1 0
Battery Display battery consumption,
remaining battery level, etc.