User's Manual
239
Data communication
You can send/receive data to/from a device
with NFC such as a mobile phone. If you use
the one-touch function with a Sony product
with NFC, simple operations allow you to
send or receive images, music, photos or
videos taken with the terminal.
・
Enable NFC Reader/Writer, P2P function in
advance (P.239).
・
Place 2 mobile phones in parallel position and
point marks to each other. Do not move
them until sending/receiving is complete.
・
Operations to send/receive and available data
to send/receive depend on the compatible
applications. Follow the onscreen
instructions.
・
If the License agreement screen appears
when sending/receiving data, read the
content and follow the onscreen instructions.
・
Even if marks are pointed to each other,
sending/receiving may fail. If failed, perform
operations of sending/receiving again.
・
The terminal does not communicate with all
NFC devices.
・
For notes when holding over the other
device, see "Notes on holding the mark over
the other device such as a reader or device
with the NFC module" (P.136).
Enabling NFC Reader/Writer, P2P
function
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
[NFC / Osaifu-Keitai
settings]
u
[Reader/Writer,
P2P]
u
[OK].
・
"Reader/Writer, P2P" and "Android
Beam" are marked.
・
NFC Reader/Writer, P2P function is
enabled, and appears in the status
bar.
Using NFC communication
Sending/receiving data by one-
touch function