User's Manual

251
International roaming
After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO network
automatically. If connection is failed, perform
the following operations.
･
Set "Network Mode" to "LTE (preferred)/
WCDMA/GSM" (P.251).
･
Set "Search mode" to "Automatic" in "Service
providers" settings (P.251).
By default, the terminal automatically
searches available network and connect to it.
To switch network manually, set as follows.
Setting network mode
1
From the Home screen, tap ,
then tap [Settings].
2
Tap [More...]
u
[Mobile
networks]
u
[Network Mode].
3
Select a network mode you use.
･
You can select from "LTE/WCDMA"
"GSM only" and "LTE (preferred)/
WCDMA/GSM". If you select "LTE
(preferred)/WCDMA/GSM" to switch
available network automatically.
Setting a network operator
1
From the Home screen, tap ,
then tap [Settings].
2
Tap [More...]
u
[Mobile
networks]
u
[Service providers].
･
If a note appears, tap [OK].
3
Tap [Search mode]
u
[Manual].
･
To display available networks, tap
[Search networks].
4
From "AVAILABLE NETWORKS",
mark a network to use.
❖
Information
･
If you cannot search networks, disable mobile data
communication (P.198) and then search again.
･
If you set a network manually, the terminal is not
reconnected to another network automatically even
if you move out of the network area.
･
To return to "Automatic", tap [Automatic] in
Step 3.
Setting data roaming
1
From the Home screen, tap ,
then tap [Settings].
2
Tap [More...]
u
[Mobile networks].
3
Tap [Data roaming].
4
Read the note and tap [Yes].
･
"Data roaming" checkbox is marked.
Settings for overseas use