User's Manual

271
Appendix/Index
2
Perform a target operation.
･
[OK] : Go to the Home screen. Updating
starts when the preset time is reached.
･
"Set Time" : Reserved update
→
"Reserving software update" (P.272)
･
"Start update" : Update immediately
→
"Updating software immediately"
(P.271)
❖
Information
･
If the software is not updated when the update
notification is received, appears on the status bar
to notify.
･
If software update at the preset time could not be
performed, the software update will be performed at
the same time the following day.
･
Software cannot be updated automatically when the
Auto-update setting is set to "Manual Update" or
while updating software by Now update.
Updating software immediately
Software update starts immediately.
･
There are 2 ways to activate software update:
activating from Software update notice
screen and activating from the menu.
1
From the Home screen, tap and
tap [Settings]
u
[About
phone]
u
[Software Update].
2
[Start the software update]
u
Tap
[Yes].
･
For activating from Software update
notice screen, display the Software
update notice screen and tap [Start
update].
･
"Ready for update. Please refrain from
starting other application." is displayed,
then rewriting starts automatically. Tap
[OK] to start rewriting automatically.
･
While updating the software, all key
operations become disabled. Also,
updating cannot be canceled.
･
When the software update is complete,
the terminal restarts and the Home
screen is displayed.
❖
Information
･
If software update is not needed, "No update is
needed." is displayed.
■
Post-update display
appears on the status bar. Drag the status
bar downwards and tap the notification, a
message indicating that software update is
complete appears.