User's Manual

30
Before Using the Terminal
The docomo mini UIM card is an IC card
recorded user information such as your
phone number etc.
･
You can use the terminal with docomo mini
UIM card. If you have a UIM or FOMA card,
bring it to a docomo Shop to replace.
･
When docomo mini UIM card is not inserted
to the terminal, making calls, packet
communication, etc. are not available.
･
For details on docomo mini UIM card, refer to
the docomo mini UIM card manual.
･
When inserting/removing the docomo mini
UIM card, make sure to power off the terminal
(P.37). Do not attach an AC adapter.
･
For removing/attaching the back cover, see
"To ensure waterproofness/dustproofness"
(P.24, P.25).
■
Security codes of the docomo mini
UIM card
There is a security code called PIN code in
the docomo mini UIM card. The code is set
to "0000" at subscription, which you can
change by yourself (P.218).
❖
Information
･
Please be careful not to touch or scratch a metal part
(IC) when you handle the docomo mini UIM card.
Doing so may cause malfunction or damage.
1
Hook the groove on the bottom of
the terminal with your fingertip
and lift up the back cover to
remove.
2
Remove the battery pack and hook
the projection part of the tray ( )
with your fingertip to pull out
straight, insert docomo mini UIM
card into the tray with the metal
(IC) part facing down, then press
the tray straight to the end.
･
Be careful about the orientation of the
corner cut.
3
Install the battery pack and attach
the back cover, then make sure
that there are no gaps between the
terminal and the back cover.
docomo mini UIM card
Inserting docomo mini UIM
card