User's Manual

31
Before Using the Terminal
1
Hook the groove on the bottom of
the terminal with your fingertip
and lift up the back cover to
remove.
2
Remove the battery pack, hook the
projection part of the tray ( ) with
your fingertip, pull out the tray
straight and remove the docomo
mini UIM card.
3
Press the tray straight to the end,
install the battery pack and attach
the back cover, then make sure
that there are no gaps between the
terminal and the back cover.
1
Open the docomo mini UIM card
slot cover, and insert a fingernail
into the hook at the edge of the
label tray, then pull it out straight.
Removing docomo mini UIM
card
CE mark and FCC ID