User's Manual

33
Before Using the Terminal
･
The AC Adapter 04 (optional) is compatible
with AC 100 V to 240 V. For using the terminal
overseas, a plug adapter that fits the electrical
outlets in the country you stay is needed. Do
not use an electrical transformer for overseas
use to charge the terminal.
･
Use a compatible AC adapter or microUSB
cable for charging (P.257). If you use a charger
other than the compatible one, charging may
not be available or operations may not be
performed correctly.
･
Insert and remove the AC adapter cable or
microUSB cable slowly and evenly so that
excessive force is not applied.
･
If remaining battery level is low for activating
the terminal when turning on the power, the
notification LED flashes in red three times by
pressing
P
.
･
When you start charging, notification LED on
the terminal turns red/orange/green, and
green light indicates that the battery level has
reached 90 % or more. To check the battery
level, see the status bar at the top of the
screen or from the Home screen, tap and
tap [Settings]
u
[About phone]
u
[Status] to
see "Battery level". When the battery level has
reached 100 %, battery level is displayed as
"100%" on the status bar or in "Battery level",
and "Charged." appears on the unlock screen
(P.37).
･
When the battery level is 19
％
or less,
"Connect your charger" appears on the
unlock screen. When the battery level is 14
％
or less, "Connect charger" appears in a pop-
up window. Tap [Battery info] in the pop-up
window to set Power Saver or check battery
information (P.210).
･
When you start charging with the terminal
powered off, the power turns on. However,
you cannot operate the terminal. Power off
the terminal in a place where the use is
prohibited such as in airplane or hospital for
this reason.
When using supplied Desktop Holder SO17
and AC Adapter 04 (optional) for charging, do
the following procedures.
1
Insert a microUSB plug of the AC
adapter into the charging jack on
the back side of the desktop
holder with the USB symbol (B)
side facing up ( ).
2
Unfold the power plug of the AC
adapter and insert it into an outlet.
Charging with Desktop Holder