User's Manual
36
Before Using the Terminal
4
Remove the microUSB plug of the
microUSB cable evenly from the
terminal.
5
Close the microUSB jack cover,
firmly press it and make sure that
there are no gaps between the
terminal and cover.
❖
Note
・
Installation of an MTP driver to a PC is required when
charging the battery with a Microsoft Windows XP
PC, because "USB connection mode" (P.242) is set to
"Media transfer mode (MTP)" by default. Install
Windows Media Player 10 or later to install an MTP
driver.
・
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
1
Press and hold
P
for over a
second.
・
The terminal vibrates and unlock screen
appears after a while.
2
Unlock the screen.
・
For unlocking the screen by default, see
"Unlocking the screen" (P.37).
❖
Information
・
For the first time you turn on the terminal, flick
(swipe) up/down the screen to unlock the screen
and make initial settings. For the initial settings, see
"Initial settings" (P.38).
Turning power on/off
Turning power on