INSTRUCTION MANUAL 14.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-03G". For proper use of the SO-03G, read this manual carefully before and while you use the SO-03G. * You can download the latest information of " ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key (key icon) operation is described with P, k, x, y, r. And selection operations of the icons or function items on the touch screen are described as follows. Description From the Home screen, u[Settings] u[About phone]. Touch and hold an icon. Operation From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Keep touching an icon longer (1-2 seconds).
Supplied accessories ・ ・ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-03G (with warranty) ・ SO-03G のご利用にあたっての注意事項 安全上/取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) ・ Desktop Holder SO23 (with warranty) ・ TV/Mobacas antenna cable SO02 For optional accessories compatible with the terminal (optional) , refer to NTT DOCOMO website. https://www.nttdocomo.co.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 8 17 24 ■ Handling precautions. . . . . . . . . . . . . . . ■ Waterproofness/Dustproofness . . . . . Before Using the Terminal . . . 30 Part names and functions................................................30 docomo nano UIM card....................................................
Alarm & clock........................................................................ 144 docomo backup ................................................................. 145 Appendix/Index . . . . . . . . . . . .200 Settings . . . . . . . . . . . . . . . . . . . 149 Troubleshooting................................................................. 200 あんしん遠隔サポート (Anshin Remote Support) .......................................................................................................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ・ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ・ To use tethering, subscription of sp-mode is required. ・ If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended. ・ For details on usage charge, etc., refer to the following website. https://www.nttdocomo.co.jp/english/ ・ Display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit.
Safety Precautions (Always follow these directions) ■ Indicates prohibited actions. For safe and proper use of the terminal, please read the "Safety Precautions" prior to use. Keep the Manual in a safe place for future reference. ■ ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage. ■ The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.
1. Handling the terminal, adapter, desktop holder, docomo nano UIM card, and TV/Mobacas antenna cable (common) No liquids DANGER Don’t Don’t No disassembly No liquids Do not use, store or leave the equipment in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, in a car in the hot sun) (including wearing the equipment by putting in a pocket of clothes etc.). Doing so may cause fire, burns or injury.
Do Do Power off the terminal before you step into a place where flammable gas can leak, such as gas stations. Stop charging if you charge the battery. Gas may catch fire. When using Osaifu-Keitai in a place such as a gas station, turn OFF the terminal before using it (When NFC/Osaifu-Keitai lock is activated, deactivate it before turning OFF the terminal).
2. Handling the terminal ■ Type of internal battery for the terminal is as follows. Display Li-ion 00 Type of Battery Lithium Ion Battery DANGER Don’t Don’t Don’t Do not throw the terminal into fire or apply heat. Doing so may cause internal battery to ignite, burst, heat or leak. Do Don’t Do not put excessive force such as sticking a nail into the terminal, hitting it with a hammer, or stepping on it. Doing so may cause internal battery to ignite, burst, heat or leak.
Do Do Do Do Follow the instructions of each medical facility for the use of mobile phones on their premises. Power off the terminal in a place where the use is prohibited. Failure to do so may affect electronic equipment and electronic medical equipment. If the microUSB cable is connected into the microUSB jack for charging etc. with the terminal powered off, the terminal is automatically powered on although the operations are not available.
CAUTION Don’t Don’t Don’t Don’t Don’t Do not swing the terminal around by holding strap, etc. The terminal may hit you or others and cause accident such as injury. Do Do not use damaged terminal. Doing so may cause fire, burns, injury or electric shock. When using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily. Failure to do so may cause accident such as injuries.
3. Handling adapter or desktop holder Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack. Doing so may cause fire, burns or electric shock. Don’t Do not put an excessive force up, down, left or right when the adapter is connected to the terminal. Doing so may cause fire, burns, injury or electric shock. WARNING Don’t Do not use the adapter cord if it gets damaged. Doing so may cause fire, burns or electric shock.
Do Do Do When you connect the AC adapter to the power outlet, insert it firmly. Failure to do so may cause fire, burns or electric shock. When you disconnect the power plug from the outlet or cigarette lighter socket, do not pull the adapter cord with excessive force. Instead, hold the adapter to disconnect. Failure to do so may cause fire, burns or electric shock. 4. Handling the docomo nano UIM card CAUTION Do Be careful of the cut surface when handling a docomo nano UIM card.
5. Handling the terminal near electronic medical equipment 6. Material list Part WARNING Do Do Do Do If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 15 cm or more away from the implant at all times. The radio waves from the terminal may affect the performance of electronic medical equipment.
Part Desktop holder (attachment) Desktop holder (magnet connector) Desktop holder (contacts, charging jack) Desktop holder (housing: contacts) Desktop holder (housing: charging jack) Desktop holder (shield: charging jack) Desktop holder (nameplate) Desktop holder (serial number label) Desktop holder (2D barcode label) Desktop holder (immersion sensing label) Desktop holder (rubber foot) TV/Mobacas antenna cable (connector plug: metal section) TV/Mobacas antenna cable (connector plug: body, cable, headset j
・ Clean the terminals occasionally with a dry cotton swab. ・ If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. ・ Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction. ・ Make sure to use the terminal etc.
・ Do not leave the camera under direct sunlight. The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery. ・ Be careful especially about the following points when preserving the terminal. ・ If you do so, some of the elements may melt or become faded. ・ Usually, use the terminal with the microUSB jack cover and docomo nano UIM card/microSD card slot cover closed.
When you use the power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual. ・ Do not subject the equipment to a strong impact. Do not deform the charging jack. ・ ・ Doing so may cause malfunction. Magnet is used for magnet connector that is between contacts of the desktop holder. Make sure that any iron sands or metal objects (clips etc.) are not adhered before attaching the terminal. Remove the foreign objects with a soft cloth etc.
Take an expended docomo nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment. ・ Do not carelessly damage, contact, or short-circuit an IC. ・ ・ The frequency band used by the terminal's Bluetooth/wireless LAN function is written as follows: Doing so may cause data loss or malfunction. ・ 2.4 : This radio equipment uses the 2400 MHz band. FH/XX/DS/OF: Modulation scheme is the FH-SS, other system, DS-SS, or OFDM system.
- Before using this equipment, confirm that "another station" is not being operated nearby. - In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc. - If you have further questions, contact "General Inquiries" on the last page.
・ 5GHz device cautions The terminal can use 3 frequency bands of 5.2GHz band (W52), 5.3GHz band (W53), 5.6 GHz band (W56). - 5.2GHz band (W52/36, 40, 44, 48 ch) - 5.3GHz band (W53/52, 56, 60, 64 ch) - 5.6GHz band (W56/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) Using wireless LAN built-into the terminal in 5.2/ 5.3 GHz outside is prohibited by the Radio Law.
Waterproofness/ Dustproofness SO-03G provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the microUSB jack cover and docomo nano UIM card/microSD card slot cover firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
・ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.28). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the microUSB jack cover and docomo nano UIM card/microSD card slot cover Open the covers with your fingertip by the grooves. ■ Closing the microUSB jack cover and docomo nano UIM card/microSD card slot cover Put the cover back in the direction of the arrow and push the parts in, then ensure there are no gaps. It is recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ・ Do not move the terminal in water or slam the terminal against the surface of water. ・ If you put the terminal in tap water, be sure to have it within 30 minutes.
・ Do not connect TV/Mobacas antenna cable, earphones, etc. with the terminal wet with water. Doing so may cause malfunction. c Swing the terminal about 10 times against a dry, clean cloth etc. to wipe off any water remaining in the earpiece/speaker, microphone/speaker, second microphone, headset jack, power/screen lock key, volume/zoom key, camera key, contacts for the desktop holder, covers (microUSB jack cover and docomo nano UIM card/microSD card slot cover), etc.
Notes on charging Check the following before and after charging. ・ Check if the terminal is not wet. Never charge the battery when the terminal is wet. ・ Accessories and optional devices are not waterproof/dustproof. ・ When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the supplied desktop holder or opening the microUSB jack cover.
Part names and functions a g b c d h t v i l j u w p m q e r k n s f a b c d o Notification LED Front camera lens Earpiece Proximity sensor : Detect the face to get close during a call and turn on or off the touch screen to prevent misoperation, or help auto brightness control.
❖Note ■ Do not put a sticker etc. on the proximity sensor. The back cover cannot be removed. Attempting to remove the back cover with excessive force may cause damage or malfunction. ・ The battery is built into the terminal and not removal. ・ ・ docomo nano UIM card The docomo nano UIM card is an IC card recorded user information such as your phone number etc. ・ You can use the terminal with a docomo nano UIM card.
2 Set docomo nano UIM card into the tray with IC facing up ( ), then insert the tray with the card and press it all the way into the terminal. ・ 3 Close the docomo nano UIM card cover, firmly press parts and make sure that there are no gaps between the terminal and cover. Make sure the orientation of the corner cut and direction to insert.
Removing docomo nano UIM card 1 2 Open the docomo nano UIM card slot cover, then hook your fingertip on the projection part of the tray to pull the tray straight out and remove it from the terminal. Remove the docomo nano UIM card from the tray ( ), then insert the tray into the terminal and press it straight all the way. ・ 3 Close the docomo nano UIM card slot cover, firmly press the cover, and make sure that there are no gaps between the terminal and cover (P.32).
Life of the internal battery Charging The internal battery is not fully charged at the time of purchase. ・ Estimated charging time (P.220) Operation time on full charge (estimate) The charging time varies by the internal battery condition or operating environment. ・ "Continuous standby time", "Continuous call time" (P.221) Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call time GSM VoLTE call (voice) Stationary (Auto) : Approx. 750 hours Stationary (Auto) : Approx.
Before charging It is recommended to use the AC Adapter 04/ 05 (optional) for charging. For details on the AC Adapter 04/05, see the AC Adapter 04/05 manual. ・ The AC Adapter 03/04/05 is compatible with 100V to 240V AC. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal. ・ Use a compatible AC adapter or microUSB cable for charging.
3 Install the terminal to the desktop holder and move it left or right until it clicks. ・ Attaching/Removing the attachment When the terminal and the desktop holder are correctly connected, the notification LED of the terminal turns on (P.46). ■ 1 4 When charging is complete, holding the desktop holder, lift the terminal up to remove. 5 Remove the power plug of the AC adapter from the power outlet. 6 Remove the microUSB plug of the AC adapter from the desktop holder.
❖Note You cannot charge the battery by connecting the desktop holder to a PC. ・ Check the connecting direction to connect correctly. Wrong connection may cause damage. ・ Attachment 45A is attached to the desktop holder by default. ・ Attachment 45B only supports terminal covers with " 純正卓上ホルダ対応 (Compatible with genuine desktop holders)" mark (commercially available) and the terminal can be charged on the desktop holder with a compatible cover attached.
・ Charging with a PC When using Micro USB Cable 01 (optional) for charging, do the following procedures. ・ Opening/closing microUSB jack cover (P.25) 1 Open the microUSB jack cover and insert the microUSB plug of the microUSB cable horizontally into the microUSB jack of the terminal with the engraved side ( ) facing up. 2 Insert the USB plug of the microUSB cable into a USB port of a PC. When a screen for new hardware detection etc. appears on the PC, select " キャンセル (Cancel)".
Turning power on/off Turning power on 1 Press and hold P for over a second. The terminal vibrates and lock screen appears after a while. ・ When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings (P.41). ❖Information If P is pressed to turn the power on when the battery level is low, the notification LED flashes in red 3 times, or an icon appears indicating that the battery level is low. Charge the terminal (P.34). ・ When SIM card lock (P.
Canceling the screen lock The lock screen appears when turning the power on or the sleep mode is canceled by pressing P. 1 On the lock screen, . ❖Information On the lock screen, tap to activate "Google" application. ・ On the lock screen, tap to activate the camera. ・ You can change screen unlock method (P.169). ・ When the Home screen is set to "Simple Home" (P.53) or Preferred apps settings is set to "Xperia™" (P.159), flick (or swipe) the screen left, right, up, or down to cancel the screen lock.
- Select whether to install all applications now or later Initial settings When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings for language, services, etc. 1 Select [English (United States)]u [Done]u . ・ 2 3 After this step, follow the onscreen instructions to make the following settings, and tap or [Finish].
Basic operations Operations on the touch screen ■ Touch an item such as icon or menu with your finger lightly and release it. ・ Double-tap means tapping twice quickly. Using the touch screen Precautions on using touch screen Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ・ Touching the touch screen may not work in the following cases.
■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinchout to zoom in and pinch-in to zoom out. Basic key icon operation x y r x Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. y Home Go to the Home screen. Touch and hold the icon and drag to to activate "Google" application, or drag to to activate "What's New".
Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 Drag the status bar downwards. [Quick settings]u[Auto rotate]. ・ When the setting is ON, it changes to (white). ❖Information Even when you change the orientation of the terminal, the screen may not change to landscape view depending on the screen such as Home screen, etc.
Capturing a still image or video displayed on the screen Recording a video (Record screen) 1 You can capture what is displayed on the screen. (Take screenshot/Record screen) Capturing a still image (Take screenshot) 1 On the screen you want to capture, press and hold P and volume down key for over a second at the same time. ・ Screenshot is captured and in the status bar. Alternatively, press and hold P for over a seconduTap [Take screenshot] to capture screenshot.
Setting Emergency mode In case of emergency such as disaster, restrict functions to save the battery power. 1 2 Press and hold P for over a second. [Emergency mode]uConfirm "Important information"uMark "I have read the important information"u[Turn on]. ・ All running applications end and the terminal restarts. Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc. ・ Notification LED when STAMINA® mode is set (P.
Connecting to Bluetooth device Airplane mode activated Silent mode (vibration) ON Silent mode (mute) ON Speakerphone ON Microphone put on mute Alarm is set NFC Reader/Writer, P2P function ON Positioning with GPS Battery status The battery is charging Battery is low (4% or less) PUK code locked, or docomo nano UIM card not inserted STAMINA mode ON Low battery mode ON Status bar A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed.
Notification icon The main notification icons displayed on the status bar are as follows. New email message New Gmail message New message (SMS) Problem with message (SMS) delivery New Area Mail Screenshot or screen recording saved Uploading data to Facebook Uploading data to Facebook completed Facebook setting request notification Receiving/downloading data Sending/uploading data Notification of data reception etc.
Connecting to a VPN The terminal set as media server/connection request notification received Error message/caution message Problem with sync Setup guide unchecked Some notifications are hidden Notification from docomo LIVE UX Setting USB tethering Wi-Fi tethering ON Bluetooth tethering is set 2 or more devices are set for tethering AUTO-GPS is set Omakase Lock is set Available memory on the terminal is low Notification of data transfer to microSD card exists (available internal storage decrease) Authentic
Enable/disable Wi-Fi tethering function. Location Enable/disable location information. Auto rotate Set whether to switch portrait/ landscape view automatically according to the terminal orientation. Brightness Adjust screen brightness. Airplane mode Enable/disable Airplane mode. STAMINA Enable/disable STAMINA mode. Glove mode Enable/disable Glove mode. Settings Display Settings menu (P.149). Wi-Fi hotspot b Clear ・ Clear contents on the Notification panel. Some notifications may not be cleared.
❖Information ・ To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the Home screen where no icons are displayeduTap . Adding a home screen Adding a widget to the Home screen Widget is an application which can be added to the Home screen to use. Use a widget to start an application easily. 1 Up to 7 home screens can be displayed. 1 Touch and hold an area of the Home screen where no icons are displayed.
Adding a shortcut to the Home screen You can add shortcuts of application, bookmark, etc. 1 Touch and hold an area of the Home screen where no icons are displayed. ・ 2 3 Alternatively, pinch-in on the Home screen. [Apps]. Select [Shortcuts] or an application you want to add. If you tapped [Shortcuts], select from the stored shortcuts. ・ When a data selection screen or setting screen appears, follow the onscreen instructions.
3 Tap any of [Album]/[Live Wallpapers]/[Photos]/an image. When you tap [Album], select an imageu[Crop photo]/[Crop picture]u [Always]/[Just once]uAdjust cropping frame by dragging etc.u[Done]/[Crop]. ・ When you tap [Live Wallpapers], select a contentuTap [Set wallpaper]. ・ When you tap [Photos], select a photouTap [SET WALLPAPER]. ・ ❖Information ・ To return to the Home screen, tap y or x, or tap any home screen. Changing theme You can change themes for the Home screen, wallpaper of the lock screen, etc.
Media Walkman Album Movies TV FM radio YouTube NOTTV Camera docomo mail Messaging Dial Apps* Browser Speed dial 1/Speed dial 2/Speed dial 3 P.57 P.135 P.57 P.115 P.121 P.137 P.110 P.122 P.92 P.92 P.57 ― P.101 P.54 * Applications such as "Anshin Scan", "docomo backup", etc. appear. ❖Information ・ To change to the standard Home screen, from the Simple Home screen, tap [Settings]u[Exit Simple Home]u[OK]u[docomo LIVE UX]/[Xperia™ Home]. ■ Save phone numbers and mail addresses to "Contacts" beforehand.
Using Settings 1 Sound On the Simple Home screen, [Settings]. My profile Display Sleep Brightness Auto-rotate screen Wallpaper Lock screen wallpaper Font size Screen lock Check your own phone number and mail address, etc. Select a time duration before the screen back light turns off. Adjust screen brightness. Set whether to switch portrait/landscape view automatically according to the terminal orientation. Set wallpaper for Simple Home screen. ・ To set "Custom", unmark "Default" and tap [Custom].
Saving applications in My Select If frequently used applications, etc are saved in the "My Select" folder, the applications can easily be activated 1 On the Simple Home screen, [My Select]u[Edit]u[OK]. 2 Mark applications to saveu[Done]. ❖Information ・ Xperia™ Application screen The application screen displayed when "Home" is set to "Xperia™ Home" in the initial settings is explained here. ・ Switching Home application (P.
❖Information On the leftmost application screen, flick to the right the screen (except for the left edge) to open the optional menu. ・ Application list Applications displayed on the application screen are as follows. ・ For usage of some applications, separate subscription (Charged) is required. Contacts Activate Xperia™ phonebook application to manage contacts of your friends or colleagues. Dial Activate Xperia™ phone application to make/ receive calls, and switch between calls.
Email Send and receive emails (multiple accounts are available). → P.95 Calendar Display a calendar and manage schedule. Maps Use Google Maps services, such as viewing current location, finding another location and calculating routes. → P.141 docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Sent/received mails are saved in cloud. You can view the same mail on the multiple devices or transfer mail data easily when changing model.
Play Books Download new books, bestsellers, etc. from Google Play to read. Play Games Download games, from Google Play and play them. Hangouts Chat using photos, pictograms, and videos. Alarm & clock Set alarms or display clock. → P.144 Calculator Perform basic arithmetic operations and other various calculations. Instruction Manual Display the terminal instruction manual. You can directly start a function you want to use from the explanation (in Japanese only).
NOTTV Watch Mobacas. You can enjoy programs/ contents broadcasted by "NOTTV" etc. → P.110 フォトコレクション (Photo collection) A service for backing up photos or videos up to 5GB to cloud free of charge, then accessing the backup data from smartphones, tablets or PCs. Media Player Play music and videos. → P.138 IC Tag/Barcode Reader An application that can read information written in IC tag or bar code. Hanashite Hon'yaku An application for translating spoken words into the listener's native language.
Activating two or more applications may increase battery consumption and the operation time may become short. For this reason, it is recommended to end applications when not used. To end an application, on the screen of application you are using, tap x to display the Home screen, or tap ru[Close all]. ・ Adding an application to the Home screen Add shortcuts of application to the Home screen. 1 On the application screen, touch and hold an icon you want to add to the Home screen.
❖Information To move an icon to a folder, on the application screen, touch and hold an icon you want to moveuDrag it over a folder. ・ To take out an application icon from a folder, tap the folderuTouch and hold the application iconuDrag it to a place you want to locate. ・ To change a folder name, tap a folderuTap the folder nameuEnter a folder nameuTap [Done]. Task manager ・ You can check the recently-used applications and end them.
Small apps Adding small apps You can use a small app (application displayed in a small window) such as Browser while using another application. Applications downloaded from Google Play or widgets can be added to small apps. 1 ru 2 Touch and hold a small app or widget to adduDrag it to the small apps bar (Favorites). Using small apps ❖Information 1 r. 2 Select a small app to use. ・ The set small apps appear in the small apps bar (Favorites) at the bottom of the screen.
Switching Home application In the terminal, you can switch the Home screen between "docomo" or "Xperia™". 1 2 3 4 From the Home screen, u[Settings]u[Personalization] u[Preferred apps settings]. [Set all to]/[Home screen]. ・ When "Set all to" is selected, you can set home application, lock screen, phonebook application and application for playing videos or music all at once. [docomo]/[Xperia™]. [OK].
Using Google Voice Search Character entry Enter a search word by voice. 1 From the Home screen, Google Search widget. of the 2 Speak a search word to the microphone. ❖Information ・ Alternatively, from the Home screen, u[Voice Search] to activate [Voice Search] application. Search settings You can set to use for search box or set search objectives in the terminal. 1 From the Home screen, tap the Google Search widget. 2 at the lower left of the screenu u[Settings]. 3 Select an item.
1 On the character entry screen, of the quick tool bar. ・ 2 If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). Software keyboard For Xperia™ Japanese keyboard, the following software keyboard can be used. ・ Character input method (P.67) Keypad [Help & Tips]. Selecting input method 1 2 3 From the Home screen, u [Settings]. [Language & input]u[Default].
Switching software keyboard or changing the settings Display the tool list to switch between software keyboard and handwriting/voice input, use plug-in applications (extensions), or change the settings. 1 On the character entry screen, of the quick tool bar. ・ If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears).
g h d f j c i g Move the cursor to the right. When there is an unfixed character string with the cursor at the right end, tap to enter the same character as the one at the end (Except for Handwriting input). h Enter spaces. Handwriting input a Quick tool bar Display shortcuts of frequently-used functions. Tap to display the tool list (P.67). b In Kana mode, highlight and select word in the candidate list. i Enter a line feed. Show/hide the quick tool bar.
For Handwriting input, the following operations are available. - When entering 2 or more characters and tapping the icon at the upper left, appears. Tap to combine entered 2 characters to 1 character. - When entering characters, tap to delete entered characters. ・ Note the following when you use Handwriting input. - For voiced sound and semi voiced sound mark, enter in the right upper part of the input screen.
Editing text On the character entry screen, double-tap character you want to edit so that text edit menu appears at the top of the screen. Drag or to change the character string to select. (Select all) (Cut) (Copy) (Paste) (Complete) Select all text. Cut a selected character string. Copy a selected character string. Paste a copied/cut character string. Close the edit menu. ❖Information To paste a copied or cut character string, touch and hold a position where you want to insertuTap [PASTE].
My Words Register words to My Words beforehand to display the words as the preferred candidates when entering characters. 1 On the character entry screen, of the quick tool bar. ・ If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). 2 3 4 [My Words]. 5 Tap the character input box for "Word"uFill it out. 6 [OK]. Tap the character input box for "Reading"uFill it out.
docomo LIVE UX Home screen Managing the Home screen Tapping y displays Home screen which consists of up to 7 screens you can use flicking left and right. a Move application icons or add widgets or folders to the Home screen. e b c f d c g Adding/Moving applications etc. to the Home screen "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Any of [Show apps]/[Show widgets]/[Create folder]/[MachiChara display setting].
Moving an icon on the Home screen 1 2 ・ To move to another Home screen, keep touching the icon and drag it to left or right. 1 From the Home screen, touch and hold an icon you want to delete. 2 Drag to "Back to apps list"/ "Remove from Home". Uninstalling an application or widget from the Home screen Before uninstalling application, back up contents related to the application or widget that you want to save including data saved in the application or widget.
3 Tap a wallpaper you want to change. ・ 4 Tap [See more wallpapers] to select from "Album", "Photos", "Live Wallpapers", or "Xperia™ wallpapers". Application screen 1 [For all screens]/[Just for this screen]u[OK]. 2 3 To delete home screen, tap of the home screen thumbnail you want to delete. ・ To sort home screens, touch and hold a home screen thumbnail you want to sortuDrag it to any position. ・ ❖Information Alternatively, pinch-in on the Home screen to display the home screen list.
Customizing the application screen Moving/Adding an application or widget to the Home screen 1 On the application screen, touch and hold an icon you want to add to the Home screen. 2 Drag it to the Home screen display area at the bottom of the screen. Uninstalling an application or widget Some application icons and widgets can be deleted from the application screen. ・ Before uninstalling an application or widget, see "Uninstalling an application or widget from the Home screen" (P.73).
Backing up and restoring the Home screen You can use docomo LIVE UX data backed up on the docomo cloud to restore the layout of applications, widgets, and other items on the Home screen. Once it is restored, a page for docomo services is added to the bottom of the Home screen. ・ To use the backup and restore features, you need to set up your "docomo ID" (P.165). Backing up the Home screen 1 On the Home screen, u u[Layout backup and Restore].
Delete backup data Open source licenses Terms of use Help About Delete your backup information from the server. View open source licenses. View the terms of use. View the operation guide. View the application's version and other information. Setting a category 1 2 Changing My Magazine use setting Using My Magazine My Magazine is a search service for displaying articles for categories you selected.
Phone Making/Receiving a call Making a call/video call 1 2 3 From the Home screen, u"Dial" tab. Enter a phone numberu . To make a video call, enter a phone numberu uTap [Video call]. ・ Tap to delete the number. ・ When the call is finished, tap [End call]. ・ To end a video call, tap the screenuTap [End call]. ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls.
❖Note ❖Information This terminal supports "Emergency call location information". If you use the terminal to place a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station.
When the call is finished, [End call]. ■ Using a wait (;) ・ 3 Sending is automatically on standby when the call is made and a confirmation screen asking if you send the additional number appears. 1 2 3 4 3 When "Auto conversion" in International dial assist is marked (P.198), the international dial assist screen appears when sending. Tap [Call original] or [Call]. When the call is finished, [End call]. From the Home screen, u"Dial" ❖Information tab. ・ If the area code begins with "0", omit "0".
Putting a call on hold If you are not available to answer a call, you can put the call on hold. 1 Drag upwards when receiving a voice call. 2 [Put caller on hold]. 3 When you are ready to answer the call, drag (left) to (right). The other party will hear a message saying that the call is on hold. ・ The call will be put on hold until you drag (right) to (left) or the other party ends the call. Muting the ringtone for an incoming call 1 While receiving a call, press the volume key or P.
3 Tap a message to send. ・ ■ Tap [Write new message] to create and send a message. While on a video call, you will see the other party's image in a parent window, and your image in a child window, with the operation area hidden. Tap the screen to show the operation area. ❖Information ・ Screen displayed during a video call To edit existing message, from the Home screen, tap u u[Call settings]u[Reject call with message] uSelect an existing message and edit itu[OK] in advance.
i Switching to video call : Switch from a voice call to a video call. ・ When you tap this icon, the other party will see a message asking for permission to switch to a video call. If the other party accepts it, you can switch to a video call. ・ If the other party has declined to switch to a video call, is outside a Xi service area, or is using a terminal that does not support VoLTE, a message appears indicating that the call cannot be switched. Tap [OK] to continue the voice call.
h Call history Incoming call and outgoing call are displayed by chronological order in the Recent calls screen. Up to 500 items can be displayed. Showing call history 1 ■ Adding a number from the Recent calls to Phonebook 1 uTap From the Home screen, "Recent calls" tab. History ・ The details of an incoming or outgoing call (Outgoing, Incoming, or Missed call) are displayed. From the Home screen, uTap "Recent calls" tabuTap a phone numberu[Register].
Deleting a call history Answering Machine 1 From the Home screen, u"Recent calls" tabuTouch and hold an incoming/outgoing history you want to delete. 2 [Delete from call log]u[OK]. ❖Information To delete all the entries in the call log, on the Recent calls screen, tap the "All" tabu u[Delete log]u Mark "Select all"u[Delete]uTap [Delete]. ・ Voice and video calls are not distinguished in the call log. ・ Displaying missed calls When you have missed calls, the status bar.
❖Information If there is a recorded message, is displayed in the status bar. Drag the status bar downwardsuTap [Answering Machine] to display the [Messages] screen, where you can check the recorded message. ・ To delete recorded message, touch and hold a messageuTap [Delete]/[Delete all]u[OK]. ・ Call settings You can set the network services, register call rejection or edit Reject call with message. 1 2 From the Home screen, [Call settings]. u . Record voice messages for you.
Vibrate when ringing Dial pad touch tones Answering Machine Call Blocking Reject call with message Sub address settings Prefix settings Microphone noise suppression Equalizer Speaker voice enhancement Slow talk Network mode Set whether to sound ringtone and vibrate the terminal when there is an incoming call. Set whether to emit dialpad operation sound. P.85 Set whether to reject incoming calls for numbers not in the phonebook, private, pay phone and unknown.
Phonebook ■ Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. ab c d e Displaying phonebook 1 From the Home screen, u [docomo phonebook]u"Contacts" tab.
k Index character area ・ Tap index character to display phonebook entries allocated to the index character. l Index ・ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. Making a call using the phonebook 1 From the Home screen, u [docomo phonebook]u"Contacts" tabuSelect a phonebook entry you want to make a call to. Managing phonebook 2 On the Profile screen, tap a phone number. Adding a new phonebook entry 3 [Call]/[Video call].
2 On the Profile screen, tap . ❖Information ・ To display phonebook entries added to Favorites, on the phonebook list screen, tap "Group" tabu [Favorites]. Using optional menu From the Home screen, u [docomo phonebook]u"Contacts" tabuPhonebook list screen/Profile screenu . ■ Phonebook list screen 1 Select and delete several/all phonebook entries. Cloud menu Display cloud menu. Import/Export P.91 Settings International use Set for using docomo setting for phonebook overseas.
Creating a new group in the phonebook 1 2 3 From the Home screen, u[docomo phonebook]u "Group" tab. [Add group]. On the group adding screen, enter account, group name, icon, coloru [OK]. ・ The items vary depending on the account type. ❖Information Groups in docomo account can be sorted. In Step 2, tap [Sort]uFollow the onscreen instructions. ・ Groups in docomo account can be edited/deleted. To edit/delete a group, touch and hold a groupu[Edit group]/[Delete group].
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Pictograms and Deco-mail can be used, and automatic reception also is supported. Sent/received mails are stored to the docomo mail server. Mails can be transferred readily in case the terminal is lost or you change the model. Also, with a docomo ID, you can use mail on your PC, tablet, and other devices. For details of docomo mail, refer to NTT DOCOMO website. 1 From the Home screen, ・ .
❖Information ❖Information You can change default messaging application to Hangouts. From the Home screen, u[Settings]u[More...] u[Default SMS app]u[Hangouts]. ・ You can also send/receive text messages to/from customers of overseas network operators. For details, see "Mobile Phone User's Guide [International Services]" or the DOCOMO International Services website. ・ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number".
Deleting a message (SMS) 1 2 3 4 From the Home screen, u[Messaging]. Tap a sender/recipient whose messages (SMS) to delete. Touch and hold a message (SMS) to delete. [Delete message]u[Delete]. ❖Information To delete several messages (SMS), in Step 3, u[Delete messages]uMark messages (SMS) you want to deleteu u[Delete]. ・ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[Delete].
Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u[Email]. ・ To set a second or subsequent email account, from the Home screen, u[Email]u u[Settings]uTap [Add account]. 2 Enter your email address and password. 3 [Next].
Creating and sending email 1 2 3 From the Home screen, u[Email]. (Compose). Enter the email address of recipient. Tap to select from the registered contacts. Enter in the search box at the top of the screen to display the contact list. ・ To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ・ To add Cc or Bcc recipients, tap u[Show Cc/Bcc]. ・ 4 5 Enter a subject and message. [Send].
Setting preview of Inbox 1 2 3 4 From the Home screen, u[Email]. u[Settings]u[Sprit view]. Mark a screen to preview. [OK]. Replying/Forwarding email 1 2 ・ ❖Information If you have two or more accounts, change made in any of the accounts applies to all accounts. ・ To switch to the landscape view, turn Auto rotate screen on beforehand (P.44). ・ Saving attachment file of email 1 2 3 From the Home screen, u[Email]. Tap an email with attached files. ・ When attached file is not loaded, tap [Load].
Changing Email account settings 1 2 3 From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Configure notification, ringtone, vibration*1, and notification light settings for new emails. SYNC Check Set how often the Email SETTINGS frequency application checks for new emails. Days to sync Set the interval at which the Email application automatically checks for emails.
・ The setting items displayed below the account in Step 3 affect the general settings for the "Email" application. Gmail Set a Google account. You can use Gmail to send and receive emails. ・ If you do not set a Google account, set following the onscreen instructions (P.173). ・ If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions.
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ・ Area Mail is a free service for which subscription is not required. ・ Area Mail cannot be received in the following case.
❖Information If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. ・ ❖Information To set Emergency mode, from the Home screen, u[Disaster kit]uTap (P.46). ・ Deleting Area Mail 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. Mark Area Mail you want to deleteu[Delete]u[OK]. Setting Early Warning "Area Mail" 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. u[Settings].
4 Select a candidate or [ 実行 (Go)] on the software keyboard. To zoom-in/-out web pages, pinch-out/ -in or double-tap the screen. ・ To go back to the previous page, tap x. ・ ❖Information ・ To copy text on web page, touch and hold a text you want to copyuDrag or to select a range of text to copyuTap (Copy). Searching text for web page 1 2 1 From the Home screen, u u . Changing tabs 1 From the Home screen, u uTap a tab you want to display.
Managing bookmarks and history Checking history 1 From the Home screen, u u[Bookmarks]u"History" tab. 2 Tap the date of viewing, such as [Today] and [Yesterday], or [Most visited]. You can check history, save bookmarks, etc. Bookmarking a web page 1 2 3 From the Home screen, uDisplay a web page u[Save to bookmarks]. Set a label etc.u[OK]. Opening a bookmark 1 2 From the Home screen, u u[Bookmarks]. Tap the bookmark you want to open.
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [dmenu]. dmarket There are various products such as music, ebooks, etc. 1 If an application selection screen is displayed, select the application you want to use, then tap [Always]/[Just once]. ・ Browser is activated, "dmenu" appears. ・ ❖Information To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required.
Installing applications Deleting application 1 From the Home screen, [Play Store]. 1 From the Home screen, [Play Store]. 2 Search applicationsuTap an application you want to install. 2 Flick right from the left edge of the screenu[My apps]. Tap the applications you want to deleteu[UNINSTALL]u[OK]. Check the displayed contents carefully and follow the onscreen instructions. ・ Once you accept the installation of an application, you will be held responsible for its use.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or " かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster. You can save electronic money and points to an IC card and a docomo nano UIM card.
Using "Osaifu-Keitai compatible service" 1 From the Home screen, u[Osaifu-Keitai]. ・ 2 service)" 1 2 Select a service you want to use from a service list. ・ 3 When using for the first time, on the initial setup screen, mark "Agree to the Osaifu-Keitai Usage Regulations"u[OK]. Using " かざしてリンク対応サービ ス (Kazashite-Link compatible Download an application compatible with service site or service. Hold mark over the IC card reader. From the Home screen, u[Settings]u[More...].
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. Locking Osaifu-Keitai function Use "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services. ・ NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock. 1 2 Bring the mark close to the device slowly, do not hit it strongly. ・ Hold the mark over the device at the center horizontally.
NFC NFC is an abbreviation for Near Field Communication and a short range wireless communication method of international standard defined by ISO (International Organization for Standardization). You can use a contactless IC card function, Reader/Writer function (R/W), Peer-toPeer communications function (P2P), etc. ToruCa ■ iD アプリ (iD application) "iD" refers to electronic money offered by docomo.
・ You may not be able to obtain ToruCa with an IC card reader, if you do not make initial setting for OsaifuKeitai. Mobacas Mobacas is a broadcasting service for smartphones. You can use 2 watching styles : "Real Time" (broadcasting in real time style) that allows you to watch programs in real time and "Shift Time" (broadcasting in storage style) that allows you to enjoy comic, novels, music, games, etc. as well as movies and dramas anytime and anywhere.
TV/Mobacas antenna cable To watch Mobacas with the terminal, use supplied TV/Mobacas antenna cable SO02. 1 Watching Mobacas 1 From the Home screen, [NOTTV]. 2 Tap a thumbnail of program/ content. Connect connector plug of TV/ Mobacas antenna cable SO02 to the headset jack of the terminal. ・ When using for the first time, initial settings are executed. Confirm the application license agreement and tap [ スタート (Start)]. Perform the initial settings in a place with good communication environment.
Searching for a program/ content Searching from program table (Real Time) 1 2 3 Tap a program/content you want to reserve. 4 [ 予約する (Reserve)]u[1 回のみ予約す る (Reserve only once)]/[ シリーズ予 約する (Reserve in series)]. ・ From the Home screen, [NOTTV]. [ 番組表 (Program guide)]. To display Shift Time program guide, tap [ シフトタイム (Shift Time)]. ・ Tap a current broadcasting program to switch to a watching screen of selected program. ・ Searching by conditions 1 2 3 ❖Information ・ ・ From the Home screen, [NOTTV].
Data may be complemented automatically using packet communication when contents are not completely received because of the reception status of broadcast wave etc. ( 自動補完 (Auto complement)). ・ You can disable the auto complement. ・ Reserving watching/recording Real Time programs 1 2 3 From the Home screen, [NOTTV]. Setting Mobacas You can set for view, audio, content reception, etc. 1 2 From the Home screen, [NOTTV].
Set whether to display information of bar) program on programs on the air on the air) the status bar. 新着情報の通知 Set whether to display (Notification arrival notification of Shift Time/recording of arrival information) on the status bar. お知らせ情報の Set whether to display notification from 通知 (Notification NOTTV on the status bar. of notice information) Set whether to block ペアレンタル 視聴年齢制限 age restricted コントロール (Age restriction for programs. (Parental watching) control) 年齢設定 (Age Set age to restrict.
詳細設定 データ放送表示 Enable/disable display (Advanced) (Display data of data broadcasting. broadcasting) Refresh shift time 再読込 display. (Reloading) 文字コード変換 Convert character codes used for shift (Character time. code conversion) TV TV is an application with which you can switch between Full seg and 1Seg and watch according to the air wave reception condition.
Airwaves Full seg and 1Seg are broadcast services and a different type of radio waves (airwaves) from that of FOMA service is received. Therefore, regardless of whether you are in or out of Xi service or FOMA service area, it cannot be received where airwaves do not reach or during broadcasting interruptions.
i j k Reception signal level Record icon Channel selection key ・ Touch and hold / to search available channels. l Data broadcasting ・ For 1Seg programs, data broadcasting can be viewed only in the portrait screen. m Data broadcasting remote control ・ ❖Information ❖Information ・ ・ ・ ・ ・ ・ ・ To show/hide icon such as option menu, on the TV watching screen, tap an image. While watching TV, press the volume key to adjust the sound volume. You can watch TV in the portrait screen or landscape screen (P.
Display recorded program list (P.120). Reserve Recording/ Reserve recording or Viewing watching programs or display failed reservation list (P.120). TV link Display TV link list screen (P.119). Change area Register or change broadcasting area (P.118). Subtitle/Sound/Video Enable/disable subtitle setting display and set subtitle position* and main/sub sound. Settings Superimpose Set whether to display setting superimpose for Full seg or select a superimpose language.
3 Tap a broadcasting station to change the remote control numberuTouch and hold an image. 3 4 Touch and hold a number of remote control you want to set to. ・ 5 [YES]. ・ If you select a number of remote control which is already assigned to another broadcasting station, [Overwrite registered channel]uTap [YES]. ❖Information To delete set broadcasting stations, touch and hold a broadcasting station to delete in Step 3u[Delete channel]uTap [YES]. ・ Select a TV link.
❖Information Playing a recorded program 1 2 3 From the Home screen, u[TV]. u[Recorded program list]. Tap a program you want to play. ❖Information To delete a recorded program, touch and hold the program you want to delete in Step 3u uTap [YES]. ・ To change the title of a program, touch and hold the program you want to rename in Step 3u uEnter a titleuTap [OK]. ・ Tap in Step 3 to set the playback mode and see the amount of available memory.
■ FM radio FM radio screen abc You can listen to the FM radio with the terminal. To use FM radio, use a commercially available earphone set or headphone. They work as antenna. d f g Listening to the FM radio 1 Connect a plug of a commercially available earphone set or headphone to the headset jack of the terminal. 2 From the Home screen, radio]. 3 Tap ・ / u[FM to select channel. You can select channel by flicking the screen left and right.
Camera Take still pictures and record video clips. Shooting is available in the portrait and landscape screen. For shooting with Sweep Panorama, always hold the camera horizontally. Before using the camera All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card. When saving to a microSD card, attach a microSD card before using the camera. ・ When the terminal temperature becomes high, the camera may not activate or may stop.
c Activating the camera You can activate the camera with the camera key (k) (Quick launch). ・ Using Quick launch (P.134) 1 Press and hold k for over a second. ・ A shooting screen appears. ❖Information Alternatively, from the Home screen, to activate the camera. ・ u[Camera] Shooting screen and key operation ■ Shooting screen a b c d Display area for status icons ・ Icons of set items such as Self-timer, Geotagging, etc. are displayed.
Changing capturing mode 1 Press and hold k for over a second. 2 Tap the capturing mode iconuSelect capturing mode. Superior auto Shoot still pictures or videos with automatically optimized settings. Your terminal detects that the camera is moving ( ) or staying still ( ), or that your subject is moving ( ), and determines the optimal scene.
Timeshift burst Select the best shot from continuous shot images before and after pressing the shutter. 61 still pictures in total are shot continuously for a second before and after pressing the shutter and all the still pictures are saved. A still picture selected from the thumbnails on the preview screen after shooting is used as cover image displayed in "Album" application. Social live by Bambuser Share experience with friends on Facebook in real-time.
If shooting angle does not reach the required value for Sweep Panorama within a certain period of time, the part which was not taken is recorded in gray. To avoid this, move the camera faster when shooting. ・ Because two or more images are joined together, joints may not be recorded smoothly. ・ Images may be blurred or may not be taken in a dark scene.
■ 1 2 Shooting with the camera key Press and hold k for over a second. Press k. ・ To shoot still pictures using auto-focus function, press k halfway and when the auto focus frame turns blue and you hear a beep, press k all the way until it stops. Recording videos ■ 1 2 ❖Information Shot still pictures are automatically saved in the internal storage or a microSD card. ・ If the auto focus frame does not appear, auto-focus does not operate correctly.
■ Shooting with the camera key You can use this key when the capturing mode is set to "Manual", "4K video", "Timeshift video", "Live on YouTube", or "Social live by Bambuser". 1 2 Press and hold k for over a second. Tap the capturing mode icon, then select a capturing mode. ・ 3 When the capturing mode is set to "Manual", tap to display the video shooting screen. Press k to start/stop shooting.
When the capturing mode is set to "Sound Photo", images are shot at "8MP" (16:9). ・ When the capturing mode is set to "AR fun", "Multi camera", "Face in picture", "AR effect", "Creative effect", or "Timeshift burst", images are shot at "2MP" (16:9). ・ ■ ■ Set focus controls. Single autofocus The camera automatically focuses on the center of the shooting screen. Multi autofocus (only for still picture) The camera automatically focuses on several points on the shooting screen.
■ ISO (only for still picture) ■ Set ISO sensitivity. ・ With ISO sensitivity up, you can shoot clear picture reducing blur even in a place where lightning is poor. However, noise stands out. ・ With ISO sensitivity down, you can shoot with noise kept low. However, it may be dim and tend to make blur in a place where lighting is poor. ■ Metering Measure the brightness on the shooting screen to determine a well-balanced exposure automatically.
When the capturing mode is set to "Superior auto" using main camera, select "High speed" or "Standard", depending on how fast your subject is moving. ・ When "Touch capture" is ON, touch and hold the shooting screen to shoot Burst with longpress, too. ■ Face registration (only for still picture) Set whether to display name on face tagged with "Album" application to focus on preferentially. ■ Quick launch Set behavior when using Quick launch (P.134).
Changing settings from the icon on the screen Tap the icon displayed on the shooting screen to change the setting. ・ The displayed icons vary depending on the capturing mode. ■ Flash Set the flash to light or not when lighting conditions are poor or in backlight. Auto Turn on the flash automatically according to the brightness. Fill flash Always turn on the flash regardless of the brightness. Red-eye reduction Reduce red-eye effect caused by the flash. Off The flash does not turn on.
Hand-held twilight Shoot a crisp and clear night scene reducing noise. High sensitivity Shoot brightly without flash even when shooting under poor lighting condition. Gourmet Shoot clear images making food look delicious. Pet Suitable for shooting pets. Beach Reconstruct beach scene brightly and vividly. Snow Reconstruct snow scene brightly and vividly. Party Shoot an indoor picture creating good atmosphere of indoor lighting. Due to long exposure time, be careful not to shake camera.
Using Quick launch Set operation when activating Camera by pressing and holding k for over a second, or touching and holding on the lock screen and then dragging it to (Quick launch). ・ When the lock screen is set to "docomo", and the unlock method is set to "Swipe/Touch", is displayed, instead of . Tapping works for “Launch only”. 1 Press and hold k for over a second. ・ 2 3 "Launch only" to activate the camera is set by default. u" " tabu[Quick launch].
Shooting with Smile Shutter Shoot smile face. 1 2 3 4 5 Press and hold k for over a second. u" " tab/" " tabu[Smile Shutter]/[Smile Shutter (video)]. Select smile level for the smile shutterux. Point the camera at the object. Detected faces are framed (up to 5 faces). ・ The camera selects which face to focus on. Face frame for focusing on turns to yellow (still picture)/blue (video). View/play photos or videos.
f Timeshift video ・ Files saved containing slow-motion videos are marked with . g Burst with longpress files h 4K video ■ Photo viewing screen ・ Video playback screen (P.139) a bc ❖Information Depending on the number of saved images, it may take some times to load images. ・ To zoom in/out images, pinch out/in on the image list screen. ・ d e Viewing a photo/video 1 From the Home screen, [Album]uTap a photo/video. For Burst with longpress files, tap a photo.
Operating image files 1 From the Home screen, [Album]uTap a photo/video. 2 Tap a screen. Upload to online service, send via Bluetooth or mail, copy/move to microSD card. Play in slideshow, edit, register or check the detail information. Select "Throw" to share files between your terminal and DLNA devices or screen mirroring compatible devices. ❖Information Different options may be shown or some items cannot be operated in some image files.
■ Media Player Music playback screen a b Play back music and videos stored on the internal storage or a microSD card using Media Player. ・ File formats of playable data (P.222) e f ❖Information g h For details on Media Player, from the Home screen, u[Media Player]u uTap [Help] to refer to the manual of Media Player. ・ From the Home screen, Player].
❖Information ・ g You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played. ■ Video playback screen ❖Information ・ a b Auto-rotate screen ON/OFF ・ Tap to turn red and disable Auto-rotate screen. h Volume control ・ Alternatively, on the playback screen, press the volume key to adjust the volume.
Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function The terminal has a GPS receiver that uses satellite signals to calculate your location. Some GPS features use the Internet. Data rates and charges may apply. When you use GPS function to find your location, make sure you have a clear view of the sky. If GPS does not find your location after several minutes, move to another location.
■ Where radio waves are difficult to receive Note that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.
Finding the current location on the map You can detect your current location using location information service. ・ To detect current location, enable Location (P.141) beforehand. 1 From the Home screen, [Google]u[Maps]. ・ 2 When a message appears, follow the onscreen instructions. Current location is shown by blue mark. If you tap , the icon changes to , and then the terminal's geomagnetic compass links the direction displayed on the map.
Creating schedule event Schedule Displaying schedule 1 From the Home screen, u[Schedule]. ・ When using for the first time, tap [ 同意 する (Agree)] on the 「スケジュール&メ モアプリ」ソフトウェア使用許諾規約 ("Schedule & Memo application" license agreement) screen. Configure settings by following the instructions on the resulting screen asking if you want to use cloud services. 2 2 3 Flick the calendar left or right to display the next or previous month/week/day.
❖Information Setting display conditions in Schedule u[Delete To delete alarms, in Step 2, tap alarms]uMark alarms you want to deleteu[Delete]* u[Yes]. * A number of marked alarm is displayed at the right side of "Delete". ・ When a search criteria is set, specified data can be displayed. 1 2 3 From the Home screen, u[Schedule]. [Conditions]. On the selecting screen for search conditions, tap items to display.
❖Information Time display during day-light saving time may differ from time difference displayed on the screen when adding a city in Step 2. ・ To change the order of cities, in Step 2, tap u[Rearrange]uDrag at the side of date and time for the city up or downuTap [Done]. ・ To delete cities, in Step 2, tap u[Delete]uMark cities you want to deleteuTap [Delete]*u[Yes]. * A number of marked city is displayed at the right side of "Delete".
Backing up/Restoring to/from Data Storage BOX You can back up/restore call logs, music, etc. to/from Data Storage BOX. ・ Note that use of Periodical backup may cause high packet communication charge. Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. 2 3 [Restore]. Tap [Select] on data type to restoreuMark data to restoreu [Select]. Backing up 1 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. 2 [Backup].
Backing up/Restoring to/from microSD card Back up or restore data such as phonebook entries, docomo mails, images/videos, etc. to an external memory such as microSD card. Backing up If microSD card is not installed, data such as images and movies are saved to the internal storage. You can back up only data such as images and movies stored in the internal storage. Data stored in microSD card cannot be backed up. 1 From the Home screen, u[docomo backup]u[Backup/ restore to microSD]. 2 3 4 5 [Backup].
Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in Google account to docomo account. 1 From the Home screen, u[docomo backup]u[Backup/ restore to microSD]. 2 3 [Phonebook account copy]. [Select] on Google account contacts you want to copyu [Overwrite]/[Add]. ・ When a message appears, follow the onscreen instructions. ❖Information ・ If phonebook item names (e.g. Phone number, etc.
Settings Viewing the setting menu 1 From the Home screen, [Settings]. WIRELESS & NETWORKS DEVICE PERSONAL ACCOUNTS SYSTEM u P.149 P.159 P.165 P.172 P.174 WIRELESS & NETWORKS Wi-Fi Bluetooth Data usage Xperia™ Connectivity More... Airplane mode Default SMS app Tethering & portable hotspot VPN Mobile networks NFC / Osaifu-Keitai settings P.149 P.181 P.152 P.153 P.154 P.93 P.156 P.158 P.155, P.193 P.106, P.
Turning on Wi-Fi 1 From the Home screen, u [Settings]uTap or drag right of Wi-Fi. ・ It may take a few seconds before the Wi-Fi connection is on. ❖Information Even when Wi-Fi is on, packet communication is available. However, while you connect Wi-Fi network, Wi-Fi comes first. ・ When a Wi-Fi network is disconnected, connection is automatically switched to a LTE/3G/GSM network mode. Note that packet communication charge may be applied if network connection stays switched.
Adding a Wi-Fi network manually ・ Turn Wi-Fi on beforehand (P.150). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. uEnter a network SSID of the Wi-Fi network you want to add. Network notification Keep Wi-Fi on during sleep Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add. ・ 4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear. 4 If required, enter security information for the Wi-Fi network you want to add. 5 [Save].
Advanced Set whether to control the battery power consumption when Wi-Fi is on. Auto IP support Enable/disable Auto IP function. Passpoint Set whether to connect to available Passpoint network automatically. Passpoint Set Passpoint network. networks MAC address Check MAC address. IP address Check IP address. Wi-Fi optimization Using Wi-Fi Direct compatible device You can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point. ・ Turn Wi-Fi on beforehand (P.
❖Information Note that mobile data communication will be disabled when data usage volume reaches to the limit. ・ Change the setting value for data usage limit and the value for alert by dragging the right end of each bar in the graph. ・ Xperia™ Connectivity One-touch setup Smart Connect Setting Data usage cycle 1 2 From the Home screen, u[Settings]u[Data usage]. Tap "Data usage cycle" setting itemuSet period/[Change cycle...]. ・ Screen mirroring* When you tap [Change cycle...
Windows tethering DUALSHOCK™3/ DUALSHOCK™4 MirrorLink™ USB Connectivity Display the description about Windows tethering. To connect by Windows tethering, set the following beforehand. ・ Turn on Bluetooth function of the terminal and the PC (P.181). ・ Set security of Portable Wi-Fi hotspot to "WPA2 PSK" (P.157). ・ Pair the terminal and a PC whose OS is Windows 8.1 or later via Bluetooth (P.182). Connect a DUALSHOCK® series wireless controller to your terminal.
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For using mopera U, Business mopera Internet add the access point manually. For details on mopera U, refer to mopera U website. Checking the access point in use 1 From the Home screen, u[Settings]u[More...]u[Mobile networks]u[Access Point Names]. ・ It is recommended that you use the displayed access point without editing.
sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as i-mode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on spmode, refer to NTT DOCOMO website. Setting USB tethering 1 2 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. Connect the terminal to the PC with a USB compatible PC with Micro USB Cable 01 (optional) etc. (P.38).
Setting Wi-Fi tethering 1 2 3 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. [Portable Wi-Fi hotspot]. Confirm "Details"u[OK]. ❖Information If Wi-Fi tethering starts while connecting to Wi-Fi network or the terminal and DLNA device are connected via Wi-Fi network, Wi-Fi network is disconnected. Wi-Fi network is automatically connected when Wi-Fi tethering ends. ・ Wi-Fi tethering can be used with USB tethering or Bluetooth tethering at the same time.
Connecting to a VPN (Virtual Private Network) ❖Information ・ To edit/delete VPNs, touch and hold a VPNu[Edit profile]/[Delete profile]. Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. Connecting to a VPN ❖Information 2 3 ・ To set up a VPN access from the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website.
Clear viewed notifications DEVICE Personalization Home Call Sound Display Storage Power management Apps Tap & pay P.159 P.159 P.86, P.197 P.160 P.161 P.162 P.163 P.164 P.165 Personalization Motion Themes Wallpaper Preferred apps settings Lock screen Set whether to answer or reject call without touching the screen while receiving. You can change themes for the Home screen, wallpaper of the lock screen, etc. P.
Phone ringtone Increasing ringtone* Sound The sound setting for music recommended by Sonny. It helps optimize the settings for digital signal processing technology with a onetouch operation. Sound effects Set sound effects. Dynamic Set to play at a normalizer comparable volume when songs with different volume levels are played. Headphones Set the sound quality suitable for the headphones of your choice. Noise canceling Reduce background noise by turning on the noise-canceling function.
Adjusting each sound volume Adjust volumes for playing media, ringtone, notification sounds and alarms. 1 From the Home screen, u[Settings]u[Sound]u [Volumes]. 2 3 Drag the slider to the right or left. [OK]. ❖Information Even if alarm volume is set in Volumes, set in "Alarm & clock" app is given priority (P.144). ・ Press Volume key when the Home screen is displayed to adjust the volume for ringtone. Press Volume key while receiving a call to mute the ringtone.
[Done]. Set font size. Set whether to turn on the backlight by double-tapping the screen when the backlight is turned off. Notification light Set whether to notify missed call etc. with blinking notification LED. 3 Adjusting the screen brightness Check or format memory volume of device memory (internal storage), microSD card, and USB storage. Font size Tap to wake up 1 2 From the Home screen, u[Settings]u[Display]u [Brightness]. Drag the slider to the right or left.
Check available memory space of USB storage. Unmount Cancel connection of USB storage*1 USB storage to remove it safely. Mount USB Have USB storage storage*1 recognized. Clear USB Format USB storage. storage*1 MISCELLANEOUS Transfer data Transfer data in the to SD card*2 device memory (internal storage) to the microSD card. Remote Set to handle files on shares a remote server such as NAS at home etc. in the same way as ones on the terminal.
Apps Manage and delete installed applications, display memory usage condition, etc. or change the settings. Managing applications 1 2 From the Home screen, u[Settings]u[Apps]. Tap the application you want to manage. To delete application data, tap [Clear data]uRead the notes and tap [OK]. ・ Tap [Clear cache] to delete cache or tap [Clear defaults] to delete settings for activating the application and restore to the default.
❖Information When you disabled an application, some other applications linked to the disabled application may not be operated correctly. Enable the disabled application again to operate them correctly. ・ Resetting application You can reset disabling applications on "All" tab (P.164), settings for activating application (P.164), or restricting background data (P.151). 1 2 3 From the Home screen, u[Settings]u[Apps]. u[Reset app preferences]. [Reset apps].
Send device error Set for sending error information information to the server managed by DOCOMO. Remote Set for using the service by Initialization remote operations such as Service initializing data etc. in the terminal. Profile setting Check or change your profile information used for docomo services. Switch USB Configure settings for using a debugging dedicated terminal, especially at a docomo Shop. Open source View open source licenses.
Device Set whether to enable device administrators administrating function. Unknown sources Set whether to permit installing before downloading unknown sources application. Some applications may be of unknown origin. To protect the terminal and personal data, only download applications from trusted sources. Verify apps Set whether to prohibit installation of possibly harmful applications or to warn before installation.
If you forget your security codes, you must bring your official identification (such as driver's license), the terminal, and docomo nano UIM card with you to the nearest docomo Shop. For details, contact the "General Inquiries" on the last page. ・ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop.
■ Personal Unblocking Key (PUK code) The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself. ・ If you failed to enter PUK code 10 times consecutively, the docomo nano UIM card is locked. Please contact a docomo Shop. Enabling SIM card lock By entering PIN code when powered on, you can protect from improper use. 1 2 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Lock SIM card]. Enter PIN codeu[OK].
2 Tap a unlock method to set. When you tap [PIN], follow the onscreen instructions to enter 4 - 16 digit numbers. This "PIN" code is different from one to be set on a docomo nano UIM card (P.168). ・ If you tapped [Bluetooth unlock], follow the onscreen instructions to set the Bluetooth device you want to use for unlocking. You must pair the Bluetooth device with your terminal beforehand.
Language & input Setting Voice Search Language Language Default Xperia™ Chinese keyboard Xperia™ keyboard Google voice typing Moji-Henshu Xperia™ Japanese keyboard Spell checker* Personal dictionary Voice Search Text-to-speech output Pointer speed Change phone language. Select input method. P.71 Set whether to run the spell checker. Register words to the personal dictionary. P.171 P.171 Set pointer speed when a mouse or trackpad is used. * Downloading Android keyboard is required.
Backup & reset Back up my data Backup account Automatic restore Factory data reset 1 Set whether to back up settings for applications, data, etc. to Google server. Set an account for backup to Google server. Set to restore backup settings or data when re-installing application. P.172 Resetting the terminal Resetting the terminal deletes all data, including downloaded applications and accounts, and resets the terminal back to the initial (default) state.
Setting Google account Setting other account You can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc. You can set multiple Google accounts on the terminal. 1 1 2 From the Home screen, u [Settings]u[Add account]u [Google]. Follow the registration wizard, set a Google account. ❖Information A Google account registered with "Back up data to your Google Account." marked on the "Google services" screen is registered as a backup account.
Configuring sync settings for your accounts ■ To sync automatically Synchronize information of online service with the terminal. You can display and edit information on the terminal or a PC. ・ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. From the Home screen, u[Settings]uTap for Auto-sync or drag it to the rightu [OK]. ■ To sync manually 1 When the auto-sync function is off, you can sync your registered account(s) manually.
Accessibility TalkBack*1 Set user support service (TalkBack). Captions Set whether to display captions or set language, font size, etc. for captions. Magnification Set whether to zoom in/out by gestures tapping the screen 3 times. Large text Set whether to use large text. Power button ends Set whether to end a call by call*2 pressing P. Auto-rotate screen P.44 Speak passwords Set whether to read out passwords.
About phone Software Update Upgrade Android software Application update Status Legal information Model number Processor info Android version Baseband version Kernel version Build number P.212 P.216 Download new applications or update applications. Check own phone number, battery status, remaining battery, battery performance, etc. Check open source license or Google terms of use, etc. Check versions and numbers.
File management Storage structure Phone (internal storage) Folders in the internal storage by default are as follows. ・ Displayed folders may differ depending on the terminal operations. Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. DCIM Stores still pictures/videos shot by Camera. DeviceConfig Used for SONY configuration tool. Download Stores downloaded data through Browser. Movies Stores videos (except shots by Camera). Music Stores music data.
・ The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate. 2 Close microSD card slot cover and press part firmly to check that no gap exists between the terminal and the cover. Inserting microSD card ・ Opening/closing microSD card slot cover (P.
Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ・ Opening/closing microSD card slot cover (P.25) 1 From the Home screen, u[Settings]u[Storage]u [Unmount SD card]u[OK]. ・ 2 3 Use "File Commander" application to operate various data saved in the internal storage or the microSD card. 1 " Removed SD card" appears in the status bar. From the Home screen, Commander]. u[File The home screen for File Commander is displayed.
Moving/Copying folder or file Folders or files can be copied/moved between the internal storage and the microSD card. u[File 1 From the Home screen, Commander]. 2 Select an itemuTap a folder as required. 3 Mark a folder or file you want to move/copy. 4 5 / . Anywhere, u[Paste]. Searching for data u[File 1 From the Home screen, Commander]. 2 uEnter a folder name or file name. 3 From search results appeared according to the entry, tap data you want to check.
・ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ・ The terminal does not communicate wirelessly with all types of Bluetooth devices. ・ Supported Bluetooth profiles (P.221) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ・ Once paired, the setting with the Bluetooth device is saved. ・ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. 1 From the Home screen, u [Settings]u[Bluetooth]u[Search for devices].
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with Bluetooth devices. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other party's Bluetooth device. Receiving data 1 Send data from a Bluetooth device. ・ 2 appears on the status bar. Drag the status bar downwardsu [Bluetooth: Incoming file]u [Accept].
When pointing marks to each other, sending/receiving may fail. In such case, operate again to send/receive. ・ The terminal does not communicate with all NFC devices. ・ For notes when holding over the other device, (P.108). ・ Enabling NFC Reader/Writer, P2P function 1 2 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]uMark "Reader/Writer, P2P"u[OK]. "Reader/Writer, P2P" and "Android Beam" are marked. ・ appears on the status bar.
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Face the marks on the terminal and the receiver’s terminal each other. ・ When you receive data, appears on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions. Selecting NFC Type 1 2 3 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]u[NFC Type].
External device connection Connecting to PC 1 When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ・ When "Install software" screen appears on the terminal, tap [Skip]. ・ Connect a PC to exchange data between the internal storage or the microSD card and a PC. ❖Information Appeared screen may vary depending on the operating system (OS) of a PC.
・ When the terminal is connected to a PC with "Media transfer mode (MTP)" set in "USB connection mode", accessing to the microSD card from the terminal is unavailable. Therefore, functions using the microSD card in the applications such as "Camera", "Album", etc. may not be available. Disconnecting the microUSB cable safely ・ Do not disconnect the microUSB cable during data transferring. Data may be damaged.
4 5 6 Open " コンピュータ (Computer)" window on the PCuRight-click the terminal icon displayed as a portable deviceu" ネットワーク構成 (Network composition)"u" 次へ (Next)". On the pop-up screen of the terminal, tap [Pair]. On the " ポータブルデバイスのネット ワーク構成 (Network composition of the portable device)" window of the PC, click " 完了 (Done)". ・ If the privacy separator function for Wi-Fi network (access point) is enabled, pair setting cannot be made.
2 Tap of Share media or drag it to the right. appears on the status bar. Tap [Change server name] to rename the terminal (media server) displayed on a DLNA device. ・ To upload media files from DLNA device to the terminal, mark "Upload to Xperia™". ・ ・ 3 1 From the Home screen, tap any of [Album]/[Walkman]. ・ To play a file in "Movies", from the Home screen, u[Movies]. 2 Flick right from the left edge of the screenu[Devices]uSelect a device.
Connecting to other devices Connecting a TV Connect to a TV to activate TV Launcher and display photos and videos on the TV screen. 1 Connect to TV using commercially available MHL cable. ・ 2 3 Activate TV launcher automatically. If TV launcher does not activate automatically, , appears on the status bar. Drag the status bar downwardsuTap [TV launcher] to activate TV launcher. The terminal does not support resolution 720u576p (50Hz) for MHL output to TV.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 5. The terminal works in LTE network, 3G network and GSM/GPRS network service area.
Checking before overseas use Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ・ ■ Charging ・ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For AC adapter for charging overseas travel, use AC Adapter 03/04/05 (optional).
After arriving overseas Setting a network operator From the Settings screen, u[Settings]u[More...]u[Mobile networks]u[Service providers]. When you arrive overseas and turn on the terminal, an available network is automatically set. 1 Connectivity 2 [Search mode]u[Manual]. 3 From "AVAILABLE NETWORKS", mark a network to use. When you have set "Search mode" of "Service providers" in "Mobile networks" to "Automatic", optimized network is automatically selected (P.193).
Setting network mode 1 2 From the Settings screen, u[Settings]u[More...]u[Mobile networks]u[Network Mode]. Tap any of [LTE (preferred)/3G/ GSM]/[LTE/3G]/[3G/GSM]/[3G only]/[GSM only]. ・ If you select "LTE (preferred)/3G/GSM" to switch available network automatically. Display During international roaming, appears on the status bar. ・ You can confirm the name of the connected network operator on the Notification panel. ❖Note ・ While appears on the status bar, packet communication is available.
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ・ Check that the battery and signal levels are high enough. ・ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log.
Making a call within the country you stay Receiving a call in the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 From the Home screen, tab. 2 Enter a phone number. 3 4 u"Dial" ・ To make a call to land-line phone, enter the area code (city code) + other party's phone number. ・ When "International dial assist" screen is displayed, tap [Call original]. .
■ Having someone make a call from other than Japan to the country you stay You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan). International access code - 81 - 90 (or 80, 70) - XXXX - XXXX International roaming settings Make settings for using international roaming or international calls. ・ For some overseas network operators, settings may not be made.
Setting International dialing assist 1 2 3 From the Home screen, u [Call settings]u[Roaming settings]. [International dial assist]. . International prefix or country code is automatically added. Country code [OK]uSelect a country code which will be used for auto conversion. International prefix [OK]uSelect an international prefix which will be used for auto conversion. Auto conversion Setting Network service (overseas) From the Home screen, [Call settings]u[Roaming settings].
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ・ Set "Network mode" to "LTE (preferred)/3G/ GSM" (P.194). ・ Set "Search mode" to "Automatic" in "Service providers" (P.193).
Appendix/Index Troubleshooting Troubleshooting First, check if the software update is necessary for the terminal. If necessary, perform the software update (P.212, P.219). ・ When checking the following items not to improve the state, contact the phone number given in "Repairs" the last page of this manual (in Japanese only) or DOCOMO-specified repair office. ・ ■ Power supply Cannot power on the terminal. ・ Check if the battery is not run out. → P.34 Screen is frozen, the power cannot be turned off.
The notification LED blinks in red and the terminal cannot be operated. ・ When the battery level is low, charge the battery. → P.34 ■ Terminal operation Become hot while operating/charging. ・ While calling, depending on the radio wave condition or call duration time, the terminal may become hot around the earpiece/speaker. This condition is not abnormal. ・ While operating or charging, or if you watch TV, record video, etc.
The screen reacts slowly when you tap or press keys. ・ When large amount of data is saved in the terminal or transferring large-size data between the terminal and microSD card, the reactions on the screen may be delayed. The docomo nano UIM card is not recognized. ・ Check if the docomo nano UIM card is attached in the right direction.→ P.31 The clock is not on time. ・ The clock time may become wrong when the power is turned on for a long time.
■ Phone call Cannot make a call even if you tap . ・ Check if you activate Airplane mode. → P.154 The ringtone does not sound. ・ Is "Ringtone & notifications" in Volumes set to silent? → P.161 ・ Check if the following functions are activated. - Silent mode → P.44 - Airplane mode → P.154 ・ Is the ring time for Voice mail service or Call forwarding service "0 sec."?→ P.86 ・ Check if Pick up after in Answering Machine is set to 0 second. → P.85 ・ Check if you set call rejection. → P.86, P.
■ Sound During a voice call, the distant party's voice is hard to listen to or too loud. ・ Check if the listening volume is changed. → P.83 ・ Set the equalizer to adjust sound quality during a call. → P.87 ・ Enable Speaker voice enhancement, Slow talk to make the caller's voice clear to understand. → P.87 ■ ■ ■ Osaifu-Keitai Osaifu-Keitai function is unavailable. ・ When activating Omakase Lock, OsaifuKeitai functions are unavailable regardless of the NFC/Osaifu-Keitai lock settings.
Cannot use the terminal overseas (when is displayed) ・ Check if you are out of the international roaming service area or in an area with poor signal strength. Check if the service area and network operator are available, referring to "Mobile Phone User's Guide [International Services]" or DOCOMO International Services website. ・ Change the network settings or overseas network operator settings. - Set "Network mode" to "LTE (preferred)/ 3G/GSM". → P.
■ Bluetooth function The terminal cannot be connected to a Bluetooth communication device/A Bluetooth communication device cannot be found from the terminal. ・ Make Bluetooth communication device (commercial item) registering stand-by state and then register the device on the terminal.
Error messages ● No service ・ The terminal is out of service area, or the received signal is too weak. Move to a location where radio signal can be reached. ・ The docomo nano UIM card is not working properly. Insert the docomo nano UIM card in another terminal. If this works, it is probably the terminal that is causing the problem. In this case, contact "Repairs" on the last page of this manual (in Japanese only). Removing and inserting docomo nano UIM card may solve the problem.
あんしん遠隔サポート (Anshin 2 Remote Support) By sharing screens of your terminal with NTT DOCOMO, you can receive technical support to make settings (in Japanese only). ・ This service is not available when your docomo nano UIM card is not inserted, during international roaming, or in Airplane mode. ・ Anshin Remote Support is a service requiring subscription. ・ Some operations and settings are not supported. ・ For details on Anshin Remote Support, refer to NTT DOCOMO website.
Warranty and After Sales Services Warranty Make sure that the warranty is received with the terminal upon purchase. Check to be sure that " 販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's free warranty starting from the date of purchase.
When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty or that involve malfunction and damage due to incorrect handling by the owner (damage of microUSB connection jack, headset jack, liquid crystal, etc.) will only be repaired at the owner's expense, even if the warranty period is still effective.
Precautions ● Never modify the terminal or accessories. ・ Doing so may result in fire, injuries or malfunctions. The modified terminal may be repaired only if the owner agrees on that all the modified parts are restored to the original conditions. However, repairs may be refused depending on the modifications. The following cases may be considered as modifications. - Put a seal etc. on the liquid crystal or key part - Glued decorations on the terminal using adhesion bond, etc.
Precautions on memory dial (Phonebook function) and downloaded data Note that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal. DOCOMO shall have no liability for any change or loss of any kind. Under some circumstances, DOCOMO may replace your terminal with its equivalent instead of repairing it.
Using software update Software update should be done with battery fully charged. You are recommended to connect charging cable when updating software. ・ Software cannot be updated in the following cases.
Updating software automatically 2 Update file is automatically downloaded and software is updated at the specified time. Setting Software update ・ The settings of Software Update is set to "Automatic Update" by default. 1 2 3 From the Home screen, u[Settings]u[About phone]u [Software Update]. [Configure the software update]. [Automatic Update]/[Manual Update]. When software update is necessary Perform a target operation. "OK" : Return to the Home screen. Updating starts when the preset time reaches.
Updating software immediately ■ appears on the status bar. Drag the status bar downwardsuTap the notification, a message indicating that software update is complete appears. Software update starts immediately. ・ There are 2 ways to activate software update: activating from Software update notice screen and activating from the menu. 1 2 3 From the Home screen, u[Settings]u[About phone]u [Software Update]. [Start the software update]u[Yes].
If SO-03G is turned OFF at the reserved time, the software update starts at the same time as the reserved time after the terminal is turned ON. ・ If (Software update was suspended Please check the remaining internal storage capacity and retry.) appears on the status bar during software update, make sure that sufficient memory remains on the phone memory and retry to update. ・ If (Software update was suspended Please check the status of the handset and retry.
Notes When Upgrade Android software is performed, restoring the previous Android software is not possible. ・ Upgrade Android software with the battery fully charged. ・ For upgrading using packet communication, docomo nano UIM card is required. For using packet communication, subscription to spmode is required. ・ For upgrading via Wi-Fi, docomo nano UIM card is not required. ・ Exit from all applications before upgrading Android software.
・ Upgrading Android software ■ 1 Upgrading by receiving notification When (Upgrade Android software) is displayed in the status bar, open the status bar, drag the status bar downwardsu[Upgrade is available]. ・ ■ 1 2 Tap [Install] to install to the terminal. Upgrading manually From the Home screen, u[Settings]u[About phone]u [Upgrade Android software]. ・ If upgrade is available, the selection screen for upgrading method appears. Select a upgrading method.
Updating applications From the notification icon After the upgrading is complete, the terminal restarts and the notification icon (Upgrading has been completed) appears. Drag the status panel downwardsu [Upgrading has been completed]u[OK] and then confirm the updates in the update list. ・ From Play Store From the Home screen, tap [Play Store]u[Play Store]u[My apps] to check for updates of each application.
Charging time Continuous Full seg watching time Continuous 1Seg watching time Continuous Mobacas watching time Display Type/ Colors Size Resolution AC Adapter 03 : (alone) Approx. 240 min., (for Desktop Holder SO23 combination use) Approx. 240 min. AC Adapter 04 : (alone) Approx. 180 min., (for Desktop Holder SO23 combination use) Approx. 165 min. AC Adapter 05 : (alone) Approx. 155 min., (for Desktop Holder SO23 combination use) Approx. 155 min. DC Adapter 03 : Approx. 265 min. DC Adapter 04 : Approx.
Video camera : 3840u2160 (4K 16:9) 1920u1080 (Full HD 16:9) 1280u720 (HD 16:9) 640u480 (VGA 4:3) Front video camera : 1920u1080 (Full HD 16:9) 1280u720 (HD 16:9) 640u480 (VGA 4:3) Frame rate Timeshift video : Up to 120 fps Manual (Full HD) : Up to 60 fps Others : Up to 30 fps Wireless LAN Compliant with IEEE802.11a/b/g/n/ac (Corresponding frequency band to IEEE802.11n : 2.4GHz/ 5GHz) Bluetooth Version 4.0*1 Radio power power class 1 Available Within approx.
A use of the Internet reduces the actual call (communication)/stand-by time. Composing messages or activating the camera or applications also reduces call (communication)/stand-by time even if you do not call or use the Internet. ・ Charging time is an estimate of the time required to charge a completely empty internal battery. Under low temperature, charging may require longer time. ・ ■ Desktop Holder SO23 Input power 5.0V DC/9.0V DC 1.8A Output 5.0V DC/9.0V DC 1.
■ File format (document) The terminal supports files of the following versions/extensions. Type Microsoft Word Microsoft Excel Microsoft PowerPoint PDF Version/Extension Microsoft Word 97 - 2010/.doc, .docx, .rtf, .txt, .log, .docm, .odt Microsoft Excel 97 - 2010/.xls, .xlsx, .csv, .xlsm, .xlm, .ods Microsoft PowerPoint 97 - 2010/.ppt, .pps, .pptx, .ppsx, .pptm, .ppsm., odp Ver1.4 - 1.7/.pdf * Some files may not be viewed properly due to corrupted layouts.
(Nicaragua)/Spanish (Panama)/Spanish (Paraguay)/Spanish (Peru)/Spanish (Puerto Rico)/Spanish (Dominican Republic)/ Spanish (Uruguay)/Spanish (Venezuela)/ Basque/French (Belgique)/French (Canada)/French (France)/French (Switzerland)/Galician/Croatian/Icelandic/ Italian (Italy)/Italian (Switzerland)/Javanese/ Latvian/Lithuanian/Hungarian/Dutch (Belgium)/Dutch (Netherlands)/ Norwegian/Polish/Portuguese (Brazil)/ Portuguese (Portugal)/Romanian/Albanian/ Slovak/Slovene/Serbian/Finnish/Swedish/ Tagalog/Vietnamese
Arabia)/Arabic (Jordan)/Arabic (Lebanon)/ Arabic (Bahrain)/Arabic (Oman)/Arabic (Palestine)/Chinese, standard (Taiwan, Traditional)/Chinese, standard (China, Simplified)/Chinese, standard (Hong Kong, Simplified)/Chinese, Cantonese (Hong Kong Traditional)/Korean Certificate and compliance You can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number). u 1 From the Home screen, [Settings].
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This license is governed by the laws of Japan. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Rovi, G-GUIDE, G-GUIDE MOBILE and their logos are trademarks or registered trademarks in Japan of U.S. Rovi Corporation and/or its affiliates. ・ " モバキャス " is a trademark of Japan Mobilecasting, Inc. ・ "NOTTV" and "NOTTV" logo are trademarks of mmbi, Inc. ・ Xperia, TrackID, Info-eye, Socialife and Xperia Lounge are trademarks or registered trademarks of Sony Mobile Communications Inc. ・ PlayStation, and DUALSHOCK are trademarks or registered trademarks or Sony Computer Entertainment Inc.
"DLNA" and "DLNA" logo are trademarks or registered trademarks of the Digital Living Network Alliance. ・ MHL, Mobile High-Definition Link and MHL logo are trademarks or registered trademarks of MHL, LLC. ・ HDMI, HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ・ MirrorLink and MirrorLink logo are trademarks or registered trademarks of Car Connectivity Consortium LLC. ・ Linux is a registered trademark of Linus Torvalds,individual.
This product is licensed under the MPEG-4 visual and AVC patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 visual standard ("MPEG-4 video") or the AVC standard ("AVC video") and/or (ii) decoding MPEG-4 or AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 and/or AVC video.
SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ・ The SIM unlock service is provided at a docomo Shop. ・ A SIM unlock charge is separately required. ・ If you use a SIM other than by DOCOMO, LTE system is not available. Available services and functions may be limited. DOCOMO is not liable to any failures or malfunctions. ・ For details of SIM unlock, refer to NTT DOCOMO website.
Index A About phone ・・・・・・・・・・・・・・・・・・・・・・・・ 176 Access point Initializing ・・・・・・・・・・・・・・・・・・・・・・・・・ 155 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 155 Accessibility ・・・・・・・・・・・・・・・・・・・・・・・・・ 175 Account Removing ・・・・・・・・・・・・・・・・・・・・・・・・・ 173 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 172 ACCOUNTS ・・・・・・・・・・・・・・・・・・・・・・・・・・ 172 Adjusting sound volume ・・・・・・・・・・・・・・・ 161 Airplane mode ・・・・・・・・・・・・・・・・・・・・・・・ 154 Alarm & clock ・・・・・・・・・・・・・・・・・・・・・・・・ 144 Setting alarm ・・・・・・・・・・・・・・・・・・・・・・ 144 Album ・・・・・・・・・・・・・・・・・・・・・
Sending ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Bookmark ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Brightness ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Browser ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Adding tab ・・・・・・・・・・・・・・・・・・・・・・・・ Bookmark ・・・・・・・・・・・・・・・・・・・・・・・・・ History ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Link ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Searching text・・・・・・・・・・・・・・・・・・・・・・ Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 183 103 162 101 102 103 103 102 102 102 C Calculator ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 59 Calendar ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Call・・・・・・・・・・・
Chrome ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Connecting DLNA device ・・・・・・・・・・・・・・・ 188 Media server settings ・・・・・・・・・・・・・・・・ 188 Connecting TV ・・・・・・・・・・・・・・・・・・・・・・・ 190 Contact docomo ・・・・・・・・・・・・・・・・・・・・・・・ 87 Contact Picker 2.
Google+ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 GPS Activate ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 141 GPS function ・・・・・・・・・・・・・・・・・・・・・・・・・ 140 H Hanashite Hon'yaku ・・・・・・・・・・・・・・・・・・・・ 60 Handwriting ・・・・・・・・・・・・・・・・・・・・・・・・・・ 67 Hangouts ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 59 HDMI ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 190 Home・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 159 Home application docomo ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 72 Switching ・・・・・・・・・・・・・・・・・・・・・・・・・・ 64 Xperia ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 50 Home screen ・・・・・・・・・・・・・・・・・・・・・・・・・
Message (SMS) ・・・・・・・・・・・・・・・・・・・・・・・・ 92 Deleting message ・・・・・・・・・・・・・・・・・・・・ 94 Deleting messages (SMS) by sender/recipient ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 94 Receiving ・・・・・・・・・・・・・・・・・・・・・・・・・・ 93 Registering contact ・・・・・・・・・・・・・・・・・・ 93 Sending ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 92 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 94 MHL ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 190 microSD card Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 162 Structure ・・・・・・・・・・・・・・・・・・・・・・・・・・ 177 Missed call・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 85 Mob
My profile (editing) ・・・・・・・・・・・・・・・・・・・ 91 My profile (phonebook entry list screen) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 88 Ringtone ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 90 Share ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 90 Timeline ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 88 Phonebook list screen ・・・・・・・・・・・・・・・・・・ 88 Photo collection ・・・・・・・・・・・・・・・・・・・・・・・ 60 Photos ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 PIN code ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 168 Play Books ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 59 Play Games ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 59 Play Movi
Software keyboard ・・・・・・・・・・・・・・・・・・・・・ 66 Switching ・・・・・・・・・・・・・・・・・・・・・・・・・・ 67 Software update ・・・・・・・・・・・・・・・・・・・・・・ 212 Sony Select ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Sound ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 160 Specification ・・・・・・・・・・・・・・・・・・・・・・・・・ 219 sp-mode ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 156 Status bar ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 47 Status icon ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 47 Stopwatch ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 145 Storage Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 162 Structure ・・・・・・・・・・・・・・・・・・・・・・・・・・ 177
W Walkman ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 57 Wallpaper docomo LIVE UX ・・・・・・・・・・・・・・・・・・・・・ 73 Xperia Home ・・・・・・・・・・・・・・・・・・・・・・・・ 52 Waterproofness/Dustproofness・・・・・・・・・・・ 24 What's New ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 White balance ・・・・・・・・・・・・・・・・・・・・・・・・ 162 Wi-Fi ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 149 Wi-Fi Direct ・・・・・・・・・・・・・・・・・・・・・・・・・・ 152 WIRELESS & NETWORKS ・・・・・・・・・・・・・・・・ 149 WORLD CALL ・・・・・・・・・・・・・・・・・・・・・・・・・ 80 World clock ・・・・・・・・・・・・・・・・・・・・・・・・・・ 144 WORLD WING ・・・・・・・・・・・・・・・・・・・・・・・・ 191
Check or change your subscription, make various applications, and more online. sp-mode: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " ドコモオンライン手続きの一覧をみる (See list of docomo online procedures)" (Packet communication free) (In Japanese only) PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) ⇒ ドコモオンライン手続き一覧 (List of docomo online procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.