INSTRUCTION MANUAL 14.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-04G". For proper use of the SO-04G, read this manual carefully before and while you use the SO-04G. * You can download the latest information of "ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key (key icon) operation is described with P, k, x, y, r. And selection operations of the icons or function items on the touch screen are described as follows. Description From the Home screen, u[Settings] u[About phone]. Touch and hold an icon. Operation From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Keep touching an icon longer (1-2 seconds).
Supplied accessories ・ ・ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-04G (with warranty) ・ SO-04G のご利用にあたっての注意事項 安全上/取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) ・ Desktop Holder SO24 (with warranty) ・ 1Seg antenna cable SO02 For optional accessories compatible with the terminal (optional) , refer to NTT DOCOMO website. https://www.nttdocomo.co.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 17 24 ■ Handling precautions. . . . . . . . . . . . . . . ■ Waterproofness/Dustproofness . . . . . Before Using the Terminal . . . 30 Part names and functions................................................30 docomo nano UIM card....................................................
docomo backup ................................................................. 141 Settings . . . . . . . . . . . . . . . . . . . 144 Viewing the setting menu............................................ 144 WIRELESS & NETWORKS ................................................. 144 DEVICE....................................................................................... 154 PERSONAL............................................................................... 160 ACCOUNTS...............................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ・ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
To use tethering, subscription of sp-mode is required. ・ If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended. ・ For details on usage charge, etc., refer to the following website. https://www.nttdocomo.co.jp/english/ ・ Display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit. Note that, this shows characteristics of liquid crystal displays and not defects in the terminals.
■ The following symbols indicate specific directions. Indicates prohibited actions. Don’t 1. Handling the terminal, adapter, desktop holder, docomo nano UIM card, and 1Seg antenna cable (common) DANGER Indicates not to disassemble. No disassembly No liquids No wet hands Do Unplug ■ Indicates not to use where it could get wet. Don’t Indicates not to handle with wet hands. Indicates compulsory actions in accordance with instructions. Don’t Indicates to remove the power plug from the outlet.
No liquids Do Do not allow liquid (water, drinking water, urine of pet animals, perspiration, etc.) to come into the charging jack or microUSB jack. Doing so may cause fire, burns, injury or electric shock. Waterproofness → P.24 "Waterproofness/ Dustproofness" Use optional devices specified by NTT DOCOMO for the terminal. Failure to do so may cause fire, burns, injury or electric shock. Do Do WARNING Don’t Don’t Don’t Do not subject the equipment to excessive force or throw it.
Do Do Keep the equipment out of the reach of babies and infants. Failure to do so may cause accidental ingestion, injury, or electric shock. Be careful especially when using the terminal connected to the adapter continuously for a long time. If you play a game, watch videos or 1Seg, etc. for a long time while charging, the temperature of the terminal and adapter may rise.
Don’t Don’t Do Do not allow a foreign substance such as water and other liquids, metal parts, or flammables to get in the docomo nano UIM card or microSD card slot on the terminal. Doing so may cause fire, burns, injury or electric shock. Do Do not turn on the light toward a driver of a car etc. Doing so may disturb driving and cause an accident. Power off the terminal or put it in Airplane mode before boarding an airplane. Use of mobile phones on board is restricted.
Do Do Do Power off the terminal near electronic devices or equipment operating on high precision control or weak signals. Failure to do so may interfere with the operation of electronic devices or equipment. * The following are some electronic devices or equipment that you should be careful of: Hearing aids, implantable cardiac pacemaker, implantable cardioverter defibrillator, other electronic medical equipment, fire detector, automatic door, and other automatically controlled devices or equipment.
Do Do Do Do To use the terminal in car, check with automobile manufacturer or dealer to determine how the device is affected by radio waves before using. In rare cases, using the phone in some vehicle models can cause the vehicle's electronic equipment to malfunction. In that case, stop using the terminal immediately. The use of the terminal may cause itching, rashes, eczema, or other symptoms depending on the user's physical condition. Immediately stop using and get medical treatment in such a case.
Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack. Doing so may cause fire, burns or electric shock. Don’t Do not put an excessive force up, down, left or right when the adapter is connected to the terminal. Doing so may cause fire, burns, injury or electric shock. No wet hands Do Do Do Do not touch the adapter cord, charging jack or outlet with wet hands. Doing so may cause fire, burns or electric shock.
4. Handling the docomo nano UIM card 5. Handling the terminal near electronic medical equipment CAUTION Do Be careful of the cut surface when handling a docomo nano UIM card. Failure to do so may cause injury. WARNING Do Do Do Do If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 15 cm or more away from the implant at all times. The radio waves from the terminal may affect the performance of electronic medical equipment.
6.
Part 1Seg antenna cable (headset jack: body, cable, connector plug: body) 1Seg antenna cable (connector plug: metal section) Material Surface treatment Elastomer resin ― Brass Gold plating Handling precautions ■ Common precautions ・ SO-04G is waterproof/dustproof; however, do not allow water or dust to enter the terminal or come in contact with accessories or optional devices. The adapter, desktop holder, docomo nano UIM card and 1Seg antenna cable are not waterproof/ dustproof.
・ Clean the terminals occasionally with a dry cotton swab. ・ If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. ・ Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction. ・ Make sure to use the terminal etc.
・ Do not leave the camera under direct sunlight. Charge the battery in an environment with the proper ambient temperature (5 ℃ to 35 ℃ ). ・ The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery. ・ Be careful especially about the following points when preserving the terminal. ・ If you do so, some of the elements may melt or become faded.
・ When using the DC adapter for charging, do not turn off the vehicle engine. ・ Doing so may cause the vehicle battery run out. When you use the power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual. ・ Do not subject the equipment to a strong impact. Do not deform the charging jack. ・ Doing so may cause malfunction. Magnet is used for magnet connector that is between contacts of the desktop holder.
Under no condition will DOCOMO be held liable for any damaged or lost data saved in the terminal. ・ The frequency band used by the terminal's Bluetooth/wireless LAN function is written as follows: Take an expended docomo nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment. ・ Do not carelessly damage, contact, or short-circuit an IC. ・ 2.4 : This radio equipment uses the 2400 MHz band.
- Before using this equipment, confirm that "another station" is not being operated nearby. - In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc. - If you have further questions, contact "General Inquiries" on the last page.
・ 5GHz device cautions The terminal can use 3 frequency bands of 5.2GHz band (W52), 5.3GHz band (W53), 5.6 GHz band (W56). - 5.2GHz band (W52/36, 40, 44, 48 ch) - 5.3GHz band (W53/52, 56, 60, 64 ch) - 5.6GHz band (W56/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) Using wireless LAN built-into the terminal in 5.2/ 5.3 GHz outside is prohibited by the Radio Law.
Waterproofness/ Dustproofness SO-04G provides waterproofness property of IPX5*1 and IPX8*2 and dustproofness property of IP6X*3 with the docomo nano UIM card slot cover and microUSB jack/ microSD card slot cover firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
・ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.28). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the docomo nano UIM card slot cover and microUSB jack/microSD card slot cover. Open the covers with your fingertip by the grooves. ■ Closing the docomo nano UIM card slot cover and microUSB jack/microSD card slot cover. Put the cover back in the direction of the arrow and push the parts in, then ensure there are no gaps. It is recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ・ Do not move the terminal in water or slam the terminal against the surface of water. ・ If you put the terminal in tap water, be sure to have it within 30 minutes.
・ Do not connect 1Seg antenna cable, earphones, etc. with the terminal wet with water. Doing so may cause malfunction. c Swing the terminal about 10 times against a dry, clean cloth etc. to wipe off any water remaining in the earpiece/speaker, microphone, speaker, second microphone, headset jack, power/screen lock key, volume/zoom key, camera key, contacts for the desktop holder, covers (docomo nano UIM card slot cover and microUSB jack/microSD card slot cover), etc.
Notes on charging Check the following before and after charging. ・ Check if the terminal is not wet. Never charge the battery when the terminal is wet. ・ Accessories and optional devices are not waterproof/dustproof. ・ When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the supplied desktop holder or opening the microUSB jack cover.
Part names and functions ab c d h i u j j k w xf q r e o l f n v m f p s f t g a b Notification LED Proximity sensor : Detect the face to get close during a call and turn on or off the touch screen to prevent misoperation, or help auto brightness control.
*2 Do not remove the nameplate with stickers of CE mark, FCC ID and IMEI information printed. ■ ❖Note Do not put a sticker etc. on the proximity sensor. The back cover cannot be removed. Attempting to remove the back cover with excessive force may cause damage or malfunction. ・ The battery is built into the terminal and not removal. The docomo nano UIM card has a security code called a PIN code. The code is set to "0000" at subscription, which you can change by yourself (P.165).
2 Set docomo nano UIM card into the tray with IC facing up ( ), then insert the tray with the card and press it all the way into the terminal. ・ 3 Close the docomo nano UIM card cover, firmly press parts and make sure that there are no gaps between the terminal and cover. Make sure the orientation of the corner cut and direction to insert.
2 Remove the docomo nano UIM card from the tray ( ), then insert the tray into the terminal and press it straight all the way. ・ 3 Be careful about the direction to insert of the tray. Close the docomo nano UIM card slot cover, firmly press the cover, and make sure that there are no gaps between the terminal and cover (P.32). CE mark and FCC ID 1 Open the slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight.
・ "Continuous standby time", "Continuous call time" (P.215) Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call time GSM VoLTE call (voice) Stationary (Auto) : Approx. 800 hours Stationary (Auto) : Approx. 620 hours Stationary (Auto) : Approx. 650 hours Approx. 700 min. Approx. 650 min. Approx. 990 min. Life of the internal battery The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases.
Charging with Desktop Holder 3 When using supplied Desktop Holder SO24 and AC Adapter 05 (optional) for charging, do the following procedures. ・ Be sure to attach the supplied attachment (Attachment 34A or Attachment 34B) to the desktop holder when charging (P.36). The terminal cannot be charged on the desktop holder without attachment. 1 Insert a microUSB plug of the AC adapter into the charging jack on the back side of the desktop holder with the engraved side (B) facing up ( ).
Attaching/Removing the attachment ■ 1 2 ■ 1 Attaching Check the shape of front/back of the attachment and the attaching part of the desktop holder, then fit the attachment with the desktop holder. ❖Note You cannot charge the battery by connecting the desktop holder to a PC. ・ Check the connecting direction to connect correctly. Wrong connection may cause damage. ・ Attachment 34A is attached to the Desktop Holder by default.
Charging with AC adapter When using AC Adapter 05 (optional) for charging, do the following procedures. ・ Opening/closing microUSB jack cover (P.25) 3 When charging is complete, remove the power plug of the AC adapter from the power outlet. 4 Remove the microUSB plug of the AC adapter evenly from the terminal. 5 Close the microUSB jack cover, firmly press it and make sure that there are no gaps between the terminal and cover. ❖Note Check the connecting direction to connect correctly.
・ Charging with a PC When using Micro USB Cable 01 (optional) for charging, do the following procedures. ・ Opening/closing microUSB jack cover (P.25) 1 Open the microUSB jack cover and insert the microUSB plug of the microUSB cable horizontally into the microUSB jack of the terminal with the engraved side ( ) facing up. 2 Insert the USB plug of the microUSB cable into a USB port of a PC. When a screen for new hardware detection etc. appears on the PC, select " キャンセル (Cancel)".
Turning power on/off Turning power on 1 Press and hold P for over a second. The terminal vibrates and lock screen appears after a while. ・ When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings (P.40). ❖Information If P is pressed to turn the power on when the battery level is low, the notification LED flashes in red 3 times, or an icon appears indicating that the battery level is low. Charge the terminal (P.33). ・ When SIM card lock (P.
Canceling the screen lock The lock screen appears when turning the power on or the sleep mode is canceled by pressing P. 1 On the lock screen, ❖Information ・ To delete a widget, on the lock screen, touch and hold a widget to deleteuDrag it to "Delete" displayed at the top of the screen. Initial settings . ❖Information On the lock screen, tap to activate "Google" application. ・ On the lock screen, tap to activate the camera. ・ You can change screen unlock method (P.165).
3 When the initial settings screen for docomo services appears, mark [Agree to all]u[Start settings]. ・ After this step, follow the onscreen instructions and tap [Next]. - Set docomo ID - Set docomo cloud - Set docomo apps password - Set whether to provide location information - Set Remote Initialization Service* - Select whether to install all applications now or later * It does not appear if docomo apps password is not set. 4 [Start using]. ・ The operation guide of the Home screen appears.
Operations on the touch screen ■ Tap Touch an item such as icon or menu with your finger lightly and release it. ・ Double-tap means tapping twice quickly. ■ ■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinchout to zoom in and pinch-in to zoom out. Touch and hold Touch and hold an icon or menu item long. ■ Flick (Swipe) Touch the screen and flick up/down/left/ right.
Basic key icon operation x y r x Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. y Home Go to the Home screen. Touch and hold the icon and drag to to activate "Google" application, or drag to to activate "What's New". r Recently Display recently used applications used apps in thumbnail list to activate or delete applications from the list (P.62). Also, use or set small apps (P.62).
Setting silent mode 1 Press and hold P for over a second. 2 Tap / / . : Mute (Ringtone 0) : Vibrate : Cancel silent mode ❖Information Press and hold the volume down key to set vibrator and press the volume down key while the vibrator is set to set mute. On the lock screen, during a call, in some applications such as Camera and Walkman, silent mode cannot be set even if the volume down key is pressed.
Capturing a video (Record screen) 1 Press and hold P for over a secondu[Record screen]. A control panel is displayed. ・ If terms of use are displayed, read them and then tap [Agree]. 2 3 Tap to start recording. Tap the recording time buttonu Tap to finish capturing. Screen recording is recorded and appears in the status bar. ・ Tap to close the control panel. Setting Emergency mode In case of emergency such as disaster, restrict functions to save the battery power.
Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc. ・ Notification LED when STAMINA® mode is set (P.
Connecting to Bluetooth device Airplane mode activated Silent mode (vibration) ON Silent mode (mute) ON Speakerphone ON Microphone put on mute Alarm is set NFC Reader/Writer, P2P function ON Positioning with GPS Battery status The battery is charging Battery is low (4% or less) PUK code locked, or docomo nano UIM card not inserted STAMINA mode ON Low battery mode ON ❖Information ・ Status icons displayed in the status bar can be changed (P.154).
NFC/Osaifu-Keitai lock set on the terminal and docomo nano UIM card NFC/Osaifu-Keitai lock set on the terminal or docomo nano UIM card Omakase Lock set on the terminal and docomo nano UIM card Omakase Lock set on the terminal or docomo nano UIM card Receiving a call Making a call*/during a call* Incoming call on hold*/ongoing call on hold* Missed call Message is recorded in Answering Machine New voice mail Event notification for Schedule Stopwatch is running Timer in use Alarm sounding Playing a track with
Notification panel When notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. Open the Notification panel and then tap [Quick settings] to set Silent mode, enable/disable Wi-Fi function, etc. 1 Drag the status bar downwards. a b Enable/disable Wi-Fi tethering function. Location Enable/disable location information.
Home screen You can switch the Home screen of the terminal to "docomo LIVE UX", "Xperia™ Home" or "Simple Home". ・ "docomo LIVE UX" (P.71) ・ "Simple Home" (P.53) ・ Switching home applications (P.63) ❖Information ・ To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the Home screen where no icons are displayeduTap . Adding a home screen Up to 7 home screens can be displayed.
Adding a widget to the Home screen Adding a shortcut to the Home Widget is an application which can be added screen to the Home screen to use. Use a widget to start an application easily. 1 Touch and hold an area of the Home screen where no icons are displayed. ・ 2 1 Alternatively, pinch-in on the Home screen. [Widgets]uSelect a widget to add. ・ You can add shortcuts of application, bookmark, etc. When a settings screen appears, follow the onscreen instructions.
Adding folders on the Home screen 3 You can put applications, shortcuts, etc. added to the Home screen into a folder to manage them. 1 When you tap [Album], select an image u[Crop photo]/[Crop picture]u [Always]/[Just once]uAdjust cropping frame by dragging etc.u[Done]/[Crop]. ・ When you tap [Live Wallpapers], select a contentuTap [Set wallpaper]. ・ When you tap [Photos], select a photo uTap [SET WALLPAPER]. ・ From the Home screen, touch and hold an iconuDrag it over another icon.
Media Simple Home screen Set Simple Home to use Home screen and setting menu limited to basic functions. 1 2 ■ From the Home screen, u[Settings]u[Home]u[Simple Home]u[OK]. [OK]. ・ To set the font size to "Extra large", mark "Set font size to Extra large". Applications on the Simple Home screen Maps Google Settings My Select Tools しゃべってコンシェル P.137 P.63 P.54 P.55 P.56 P.57 P.139 P.58 P.107 P.100 P.105 P.105 P.105 P.59 (Shabette concier) iコンシェル (i-concier) P.
■ 1 2 ■ 1 Saving contacts Using Settings Save phone numbers and mail addresses to "Contacts" beforehand. 1 On the Simple Home screen, tap any of [Speed dial 1]/[Speed dial 2]/[Speed dial 3]u[OK]. Select a contact to save. ・ Making a call On the Simple Home screen, select a speed dialu[Call]. ・ ■ 1 The name "Speed dial 1", etc. is changed into the name saved in the "Contacts" application. Operation during a call (P.
Sound Silent/ Vibrate mode Ringtone Vibrate on touch Touch sounds Vibrate when ringing Customize Change Home apps Reorder apps Reset More settings Exit Simple Home Set silent mode. Set ringtone. Set whether to vibrate the terminal for some operations such as specified software key operation. Set whether to emit sound when selecting menu. Set wether to vibrate the terminal when receiving a call. P.55 Display Settings menu on the standard Home screen (P.144). Change to the standard Home screen.
❖Information Xperia™ Application screen The application screen displayed when "Home" is set to "Xperia™ Home" in the initial settings is explained here. ・ Switching Home application (P.63) From the Home screen, 1 . ab c d "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO a On the leftmost application screen, flick to the right the screen (except for the left edge) to open the optional menu. ・ Current displayed position of the application screen ・ Flick the application screen left or right to switch.
Movies Play back videos downloaded from Video Unlimited or transferred from your PC or other devices. With the Wi-Fi function, your terminal allows you to play back videos stored on a DLNA device, and TV programs recorded by a Blu-ray Disc recorder that supports the TV transfer feature. PlayStation Log in to a PlayStation Network account to use various services. Camera Take still pictures and record video clips. → P.118 1Seg Watch 1Seg programs. → P.
Sony Select Connect Sony Select to obtain applications, games, etc. Chrome Connect to the Internet with Google Chrome. Google Search information in the terminal and web pages by keywords. → P.63 Google+ Activate SNS client application Google+ provided by Google. Google Settings Make settings for Google applications. Voice Search Use Google Voice Search. → P.64 YouTube Play back videos in the world or upload recorded videos. → P.133 Drive View/edit files stored in Google Drive.
dmenu An application shortcut for "dmenu". In "dmenu", you can easily find contents you used in i-mode and joyful and convenient contents for smartphones. → P.105 dmarket There are various products such as music, ebooks, etc. You can purchase them that suits your needs. → P.105 iコンシェル (i-concier) An application for using i-concier. i-concier is a service in which a mobile phone supports your life like a "butler" or "concierge".
Anshin Scan An application for protecting your terminal from virus attacks. This feature detects potential viruses in installed applications or on microSD cards or other media. Disaster kit An application for using Disaster Message Board, Disaster Voice Messaging Service and Early Warning "Area Mail". → P.101 遠隔サポート (Enkaku support) An application for using " あんしん遠隔サポート (Anshin Enkaku Support)".
Uninstalling an application Before uninstalling application, back up contents related to the application that you want to save including data saved in the application. ・ Some applications may not be uninstalled. ・ 1 2 3 On the application screen, flick right the left edge of the screenu [Uninstall]. Tap an application icon with . [Uninstall].
Small apps Task manager You can check the recently-used applications and end them. You can activate a small app (application displayed in a small window) which can be used while using another application. Opening recently-used application window You can use a small app (application displayed in a small window) such as Browser while using another application. Applications downloaded from Google Play or widgets can be added to small apps. Using small apps 1 r. 2 Select a small app to use.
u[Play Store]/[Widgets] In the small app list, tap to install a new small app from Google Play or add a widget to small apps. ・ To delete a small app from the small apps bar (Favorites), touch and hold a small app to deleteu Drag it to displayed out of the frame of the small apps bar (Favorites)u[OK]. ・ To delete a widget or small app, in the small app list, u[Delete widget]/[Uninstall small tap app]uSelect a widget or small app to deleteu[OK].
Using Google Voice Search Character entry Enter a search word by voice. 1 From the Home screen, Google Search widget. of the 2 Speak a search word to the microphone. ❖Information ・ Alternatively, from the Home screen, u[Voice Search] to activate [Voice Search] application. Search settings You can set to use for search box or set search objectives in the terminal. 1 From the Home screen, tap the Google Search widget. 2 at the lower left of the screenu u[Settings]. 3 Select an item.
1 On the character entry screen, of the quick tool bar. ・ 2 If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). Software keyboard For Xperia™ Japanese keyboard, the following software keyboard can be used. ・ Character input method (P.66) Keypad [Help & Tips]. Selecting input method 1 2 3 From the Home screen, u [Settings]. [Language & input]u[Default].
Switching software keyboard or changing the settings Display the tool list to switch between software keyboard and handwriting/voice input, use plug-in applications (extensions), or change the settings. 1 On the character entry screen, of the quick tool bar. ・ If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears).
g h d f j c i g Move the cursor to the right. When there is an unfixed character string with the cursor at the right end, tap to enter the same character as the one at the end (Except for Handwriting input). h Enter spaces. Handwriting input a Quick tool bar Display shortcuts of frequently-used functions. Tap to display the tool list (P.66). b In Kana mode, highlight and select word in the candidate list. i Enter a line feed. Show/hide the quick tool bar.
For Handwriting input, the following operations are available. - When entering 2 or more characters and tapping the icon at the upper left, appears. Tap to combine entered 2 characters to 1 character. - When entering characters, tap to delete entered characters. ・ Note the following when you use Handwriting input. - For voiced sound and semi voiced sound mark, enter in the right upper part of the input screen.
Editing text On the character entry screen, double-tap character you want to edit so that text edit menu appears at the top of the screen. Drag or to change the character string to select. (Select all) (Cut) (Copy) (Paste) (Complete) Select all text. Cut a selected character string. Copy a selected character string. Paste a copied/cut character string. Close the edit menu. ❖Information To paste a copied or cut character string, touch and hold a position where you want to insertuTap [PASTE].
My Words Register words to My Words beforehand to display the words as the preferred candidates when entering characters. 1 On the character entry screen, of the quick tool bar. ・ If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). 2 3 4 [My Words]. 5 Tap the character input box for "Word"uFill it out. [OK]. 6 Tap the character input box for "Reading"uFill it out.
docomo LIVE UX Home screen Managing the Home screen Tapping y displays Home screen which consists of up to 7 screens you can use flicking left and right. Adding/Moving applications etc. to the Home screen a Move application icons or add widgets or folders to the Home screen. e b c f d c g "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Any of [Show apps]/[Show widgets]/[Create folder]/[MachiChara display setting].
Moving an icon on the Home screen 1 2 ・ To move to another Home screen, keep touching the icon and drag it to left or right. 1 From the Home screen, touch and hold an icon you want to delete. 2 Drag to "Back to apps list"/ "Remove from Home". Uninstalling an application or widget from the Home screen Before uninstalling application, back up contents related to the application or widget that you want to save including data saved in the application or widget.
3 Tap a wallpaper you want to change. ・ 4 Tap [See more wallpapers] to select from "Album", "Photos", "Live Wallpapers", or "Xperia™ wallpapers". Application screen 1 [For all screens]/[Just for this screen]u[OK]. 2 3 . Flick the Home screen downwards to display the application screen. d e b Touch and hold an area of the Home screen where no icons are displayed. f c [Home screens]. a To delete home screen, tap of the home screen thumbnail you want to delete.
Customizing the application screen Moving/Adding an application or widget to the Home screen 1 On the application screen, touch and hold an icon you want to add to the Home screen. 2 Drag it to the Home screen display area at the bottom of the screen. Uninstalling an application or widget Some application icons and widgets can be deleted from the application screen. ・ Before uninstalling an application or widget, see "Uninstalling an application or widget from the Home screen" (P.72).
Backing up and restoring the Home screen You can use docomo LIVE UX data backed up on the docomo cloud to restore the layout of applications, widgets, and other items on the Home screen. Once it is restored, a page for docomo services is added to the bottom of the Home screen. ・ To use the backup and restore features, you need to set up your "docomo ID" (P.160). Backing up the Home screen 1 1 2 On the Home screen, u u[Layout backup and Restore].
Backup settings 1 On the Home screen, u u[Layout backup and Restore]. 2 Backup automatically Multi-Device Sync Sync on Wi-Fi only Sync while Roaming Delete backup data Open source licenses Terms of use Help About Set whether to periodically back up the home screen information for the docomo LIVE UX. Set whether to send a notification to your other devices when an application has been installed. Set whether to back up or sync data only when the terminal is connected via Wi-Fi.
Changing My Magazine use setting 1 2 From the Home screen, u u[My Magazine settings] u[My Magazine use setting]. [Use]/[Not use]u[OK]. ❖Information ・ You can also set by tapping on the application screenu[My Magazine use setting]. Checking Home application information 1 On the application screen, u[About].
Phone Making/Receiving a call Making a call/video call u"Dial" 1 From the Home screen, tab. 2 Enter a phone numberu 3 When the call is finished, tap [End call]. . To make a video call, enter a phone numberu uTap [Video call]. ・ Tap to delete the number. ・ ・ To end a video call, tap the screenuTap [End call]. ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls.
Emergency call Emergency call Police call Fire and emergency rescue Coast guard Phone number 110 119 118 ❖Note ・ When calling 110, 119 or 118 for emergency from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the police/fire department. Also, make a point to call in a stationary position to prevent the call from being dropped.
Entering pause (,)/(;) to send 4 For using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call. Making an international call (WORLD CALL) ■ Using 2-second pause (,) Added number will automatically be sent approximately 2 seconds after the call is made. u"Dial" 1 From the Home screen, tab.
Receiving a phone/video call ・ Even when the screen is locked, you can still operate the terminal to respond to an incoming call. 1 While receiving a call, drag (left) to (right). ・ 2 To accept a video call, drag (left) to (right). To answer a call with voice only, drag (left) for "Voice only" to (right). ・ To end a video call, tap the screenuTap [End call]. If you are not available to answer a call, you can put the call on hold.
Rejecting an incoming call and sending a message (SMS) When you cannot answer a call, you can reject the call and send a message (SMS). Message to send is registered in advance, and you can edit it if necessary. 1 On the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party. ■ Screen displayed during a voice call Drag upwards when receiving a voice call. ・ 2 3 Operations during a call If it is a video call, drag upwards and proceed to Step 3.
■ Screen displayed during a video call While on a video call, you will see the other party's image in a parent window, and your image in a child window, with the operation area hidden. Tap the screen to show the operation area. a b m c d n f h o p g l a b c Name of the other party Number of the other party High-quality call ・ Displayed during a VoLTE call. ・ Displayed during both outgoing and incoming VoLTE calls.
❖Information If you switch to a different screen, such as the Home screen, while talking on the phone, making a call, or putting a call on hold, the status bar will change color. Drag the status bar downwards and then tap the notification to return to the phone application screen. ・ Switching to a different screen, such as the Home screen, while on a video call, turns the camera off. Call history ・ Adjusting the earpiece volume 1 Press the volume key during a call.
h History ・ The details of an incoming or outgoing call (Outgoing, Incoming, or Missed call) are displayed. Deleting a call history 1 From the Home screen, u"Recent calls" tabuTouch and hold an incoming/outgoing history you want to delete. 2 [Delete from call log]u[OK]. Adding a number from the Recent calls to Phonebook 1 From the Home screen, uTap "Recent calls" tabuTap a phone numberu[Register]. ・ 2 When “Add to the existing contact” is selected, select a contact to save to.
❖Information Answering Machine 1 2 From the Home screen, u [Call settings]u[Answering Machine]. Answering Machine Pick up after Use while roaming Greetings Messages If there is a recorded message, is displayed in the status bar. Drag the status bar downwardsuTap [Answering Machine] to display the Messages screen, where you can check the recorded message. ・ To delete recorded message, touch and hold a messageuTap [Delete]/[Delete all]u[OK].
Call settings You can set the network services, register call rejection or edit Reject call with message. 1 2 From the Home screen, [Call settings]. u . Record voice messages for you. Record caller's message when you cannot answer an incoming call. Call Forward a call when you forwarding cannot answer an incoming *1 service call. Call Put the current call on hold Waiting*1 and answering an incoming call or making a call to another party.
Vibrate when ringing Dial pad touch tones Answering Machine Call Blocking Reject call with message Sub address settings Prefix settings Microphone noise suppression Equalizer Speaker voice enhancement Slow talk Network mode Set whether to sound ringtone and vibrate the terminal when there is an incoming call. Set whether to emit dialpad operation sound. P.86 Set whether to reject incoming calls for numbers not in the phonebook, private, pay phone and unknown.
❖Information b To use cloud service for the phonebook, "docomo phonebook" application is needed. When you use the "docomo phonebook" for the first time (including after resetting the application) or log in to cloud from the "docomo phonebook", the "Use of Cloud" screen appears and you can start using cloud. ・ From the Home screen, uTap [Phonebook] to display the phonebook list. ・ Phonebook data can be backed up to/restored from a microSD card using "docomo backup" application (P.142).
3 [Save]. ❖Information When the language is set to Japanese, if you saved phonebook entries with the "Phonetic name (last/ first)" field filled in, the phonebook list screen shows them in Japanese syllabary order or alphabetical order of the "Phonetic name" entries. If you did not fill in the "Phonetic name" field, the entry is displayed in the " 他 (Others)" section on the phonebook list screen only when you entered the last and first names in Kanji using Japanese "Kana" characters.
Settings International use setting for docomo phonebook docomo ID/Wi-Fi settings Contacts display order Accounts to display Help About ■ Set for using docomo phonebook overseas. Set for using docomo services via Wi-Fi. Set display order of phonebook entries. Set a phonebook to be displayed in the phonebook list screen. Display Help of docomo phonebook. Display version etc. of docomo phonebook.
❖Information Groups in docomo account can be sorted. In Step 2, tap [Sort] and follow the onscreen instructions. ・ Groups in docomo account can be edited/deleted. To edit/delete a group, touch and hold a groupu [Edit group]/[Delete group]. Importing/Exporting phonebook entries ・ Checking My profile and editing information 1 2 3 From the Home screen, u [docomo phonebook]u"My profile" tabu[Edit]. On the My profile screen, enter necessary information such as name. [Save].
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Pictograms and Deco-mail can be used, and automatic reception also is supported. Sent/received mails are stored to the docomo mail server. Mails can be transferred readily in case the terminal is lost or you change the model. Also, with a docomo ID, you can use mail on your PC, tablet, and other devices. For details of docomo mail, refer to NTT DOCOMO website. 1 From the Home screen, ・ .
❖Information ❖Information You can change default messaging application to Hangouts. From the Home screen, u[Settings]u[More...]u [Default SMS app]u[Hangouts]. ・ You can also send/receive text messages to/from customers of overseas network operators. For details, see "Mobile Phone User's Guide [International Services]" or the DOCOMO International Services website. ・ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number".
Deleting a message (SMS) 1 2 From the Home screen, u[Messaging]. Tap a sender/recipient whose messages (SMS) to delete. 3 Touch and hold a message (SMS) to delete. 4 [Delete message]u[Delete]. ❖Information To delete several messages (SMS), in Step 3, u[Delete messages]uMark messages (SMS) you want to deleteu u[Delete]. ・ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[Delete].
Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u[Email]. ・ To set a second or subsequent email account, from the Home screen, u[Email]u u[Settings]uTap [Add account]. 2 Enter your email address and password. 3 [Next].
Creating and sending email 1 2 3 From the Home screen, u[Email]. (Compose). Enter the email address of recipient. Tap to select from the registered contacts. Enter in the search box at the top of the screen to display the contact list. ・ To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ・ To add Cc or Bcc recipients, tap u[Show Cc/Bcc]. ・ 4 5 Enter a subject and message. [Send].
Setting preview of Inbox 1 2 3 4 From the Home screen, u[Email]. u[Settings]u[Sprit view]. Mark a screen to preview. [OK]. ❖Information If you have two or more accounts, change made in any of the accounts applies to all accounts. ・ To switch to the landscape view, turn Auto rotate screen on beforehand (P.43). ・ Saving attachment file of email 1 2 3 Replying/Forwarding email 1 2 ・ 3 4 When attached file is not loaded, tap [Load]. Tap [Save] of file you want to save.
Changing Email account settings 1 2 3 From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Configure notification, ringtone, vibration*1, and notification light settings for new emails. SYNC Check Set how often the Email SETTINGS frequency application checks for new emails. Days to sync Set the interval at which the Email application automatically checks for emails.
The setting items displayed below the account in Step 3 affect the general settings for the "Email" application. ・ 3 When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed. ・ To add Cc or Bcc recipients, tap u[Add Cc/Bcc]. ・ Gmail Set a Google account. You can use Gmail to send and receive emails. ・ If you do not set a Google account, set following the onscreen instructions (P.168).
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ・ Area Mail is a free service for which subscription is not required. ・ Area Mail cannot be received in the following case.
❖Information If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. ・ ❖Information To set Emergency mode, from the Home screen, u[Disaster kit]uTap (P.45). ・ Deleting Area Mail 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. Mark Area Mail you want to deleteu[Delete]u[OK]. Setting Early Warning "Area Mail" 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. u[Settings].
4 Select a candidate or [ 実行 (Go)] on the software keyboard. To zoom-in/-out web pages, pinch-out/ -in or double-tap the screen. ・ To go back to the previous page, tap x. ・ ❖Information ・ To copy text on web page, touch and hold a text you want to copyuDrag or to select a range of (Copy). text to copyuTap Searching text for web page 1 2 1 From the Home screen, u u . Changing tabs 1 From the Home screen, u uTap a tab you want to display.
Managing bookmarks and history You can check history, save bookmarks, etc. Bookmarking a web page 1 2 3 From the Home screen, uDisplay a web page u[Save to bookmarks]. Set a label etc.u[OK]. ❖Information Alternatively, on the web page screen, touch and hold x to check history. ・ To delete history, touch and hold a historyuTap [Remove from history]. ・ To delete all histories, from the Home screen, u u[Settings]u[Privacy & security]u[Clear history]u[OK].
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [dmenu]. dmarket There are various products such as music, ebooks, etc. 1 If an application selection screen is displayed, select the application you want to use, then tap [Always]/[Just once]. ・ Browser is activated, "dmenu" appears. ・ ❖Information To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required.
Installing applications Deleting application 1 From the Home screen, [Play Store]. 1 From the Home screen, [Play Store]. 2 Search applicationsuTap an application you want to install. 2 Flick right from the left edge of the screenu[My apps]. 3 Tap the applications you want to deleteu[UNINSTALL]u[OK]. Check the displayed contents carefully and follow the onscreen instructions. ・ Once you accept the installation of an application, you will be held responsible for its use.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or " かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster. You can save electronic money and points to an IC card and a docomo nano UIM card.
Using "Osaifu-Keitai compatible service" 1 From the Home screen, u[Osaifu-Keitai]. ・ 2 1 2 Select a service you want to use from a service list. ・ 3 When using for the first time, on the initial setup screen, mark "Agree to the Osaifu-Keitai Usage Regulations"u[OK]. Using " かざしてリンク対応サービ ス (Kazashite-Link compatible service)" Download an application compatible with service site or service. Hold mark over the IC card reader. From the Home screen, u[Settings]u[More...].
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. Locking Osaifu-Keitai function Use "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services. ・ NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock. 1 2 Bring the mark close to the device slowly, do not hit it strongly. ・ Hold the mark over the device at the center horizontally.
NFC NFC is an abbreviation for Near Field Communication and a short range wireless communication method of international standard defined by ISO (International Organization for Standardization). You can use a contactless IC card function, Reader/Writer function (R/W), Peer-toPeer communications function (P2P), etc. ToruCa ■ iD アプリ (iD application) "iD" refers to electronic money offered by docomo.
・ You may not be able to obtain ToruCa with an IC card reader, if you do not make initial setting for OsaifuKeitai. 1Seg 1Seg is a terrestrial digital TV broadcasting service that allows mobile devices to receive broadcasted data along with images and sounds. In addition, interactive service using communication function of mobile devices and receiving detailed information are available. For details on "1Seg" service, see the following website.
Airwaves 1Seg antenna cable 1Seg is broadcast service and a different type of radio waves (airwaves) from that of Xi service or FOMA service is received. Therefore, regardless of whether you are in or out of Xi service or FOMA service area, it cannot be received where airwaves do not reach or during broadcasting interruptions.
g Watching 1Seg 1 ■ From the Home screen, ・ u[1Seg]. When using for the first time, make channel settings according to the onscreen instructions (P.114). ❖Information 1Seg watching screen e a Channel selection key ・ Touch and hold / to search available channels. h Data broadcasting ・ Appeared only in portrait screen. i Data broadcasting remote control ・ Appeared only in portrait screen.
Exiting 1Seg 1 On the 1Seg watching screen, x. ❖Information You cannot exit 1Seg even if you tap y to return to the Home screen. If 1Seg remains activated, the battery may be consumed quickly. ・ Setting 1Seg You can set 1Seg watching screen, data broadcasting and channel settings. Using optional menu You can set 1Seg watching screen, data broadcasting and channel settings 1 2 From the Home screen, . Program Program guide Program detail info Program information Recorded program list u[1Seg].
3 Touch and hold an unregistered item. 4 [Area info setting]uSelect region, prefecture and locality. [OK]. 5 ❖Information ・ By touching and holding the area registered in Step 3, you can display details, set area information, refresh channels, rename area, and deleting settings. 5 1 2 3 4 From the Home screen, u[1Seg]. Touch and hold an image. Tap a broadcasting station to change the remote control numberuTouch and hold an image. Touch and hold a number of remote control you want to set to.
Recording 1Seg Record images, sound, captions or data broadcasting while displaying. 1 2 From the Home screen, . ・ To quit recording, tap u[1Seg]. . ❖Information Maximum savable recorded data file size is 2GB, and maximum recordable time is approximately 640 minutes in a row. Items can be saved up to 99. ・ Recorded data is saved on a microSD card. Recording is not available if a microSD card is not attached. ・ When you use the microSD card from another application while recording, recording may fail.
■ FM radio FM radio screen abc You can listen to the FM radio with the terminal. To use FM radio, use a commercially available earphone set or headphone. They work as antenna. d f g Listening to the FM radio 1 Connect a plug of a commercially available earphone set or headphone to the headset jack of the terminal. 2 From the Home screen, radio]. 3 Tap ・ / u[FM to select channel. You can select channel by flicking the screen left and right.
Camera Take still pictures and record video clips. Shooting is available in the portrait and landscape screen. For shooting with Sweep Panorama, always hold the camera horizontally. Before using the camera All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card. When saving to a microSD card, attach a microSD card before using the camera. ・ When the terminal temperature becomes high, the camera may not activate or may stop.
c Activating the camera You can activate the camera with the camera key (k) (Quick launch). ・ Using Quick launch (P.129) 1 Press and hold k for over a second. ・ A shooting screen appears. ❖Information Alternatively, from the Home screen, to activate the camera. ・ u[Camera] Shooting screen and key operation ■ Shooting screen a b c d Display area for status icons ・ Icons of set items such as Self-timer, Geotagging, etc. are displayed.
Changing capturing mode 1 Press and hold k for over a second. 2 Tap the capturing mode iconuSelect capturing mode. Superior auto Shoot still pictures or videos with automatically optimized settings. Your terminal detects that the camera is moving ( ) or staying still ( ), or that your subject is moving ( ), and determines the optimal scene.
Timeshift burst Select the best shot from continuous shot images before and after pressing the shutter. 61 still pictures in total are shot continuously for a second before and after pressing the shutter and all the still pictures are saved. A still picture selected from the thumbnails on the preview screen after shooting is used as cover image displayed in "Album" application. Social live by Bambuser Share experience with friends on Facebook in real-time.
Because two or more images are joined together, joints may not be recorded smoothly. ・ Images may be blurred or may not be taken in a dark scene. ・ Under the flickering light source such as a fluorescent light, you may not be able to shoot properly since brightness or color balance of joined image may be unstable. ・ If brightness, color balance, focus point of whole image, etc. to be shot with Sweep Panorama are extremely different from those of the focused image, image may not be shot properly.
When you connect a commercially available earphone set or other Bluetooth device, shutter sound may be softer. ・ Recording videos ■ Shooting with the start/stop icon 1 Press and hold k for over a second. 2 Tap ■ / to start/stop shooting. When the capturing mode is set to "Manual", tap to display the video shooting screen, then tap . ・ Tap / to pause/resume the recording. ・ 3 4 ■ 1 Press and hold k for over a second. 2 Tap the capturing mode icon, then select a capturing mode.
While shooting a video, tap to shoot still pictures. Shot image sizes vary by video resolution setting. Full HD : 2 megapixel (1920u1080), 16:9 aspect ratio HD : 1 megapixel (1280u720), 16:9 aspect ratio VGA : 640u480 pixels, 4:3 aspect ratio ・ If you want to shoot a video using the "4K video" option, set "SteadyShot™" to "Standard" to prevent the images from being distorted. It is set to Off by default (P.126). ・ ■ Set the resolution for photo. An image with a higher resolution requires more memory.
■ Self-timer ■ Shoot after set period of time (seconds) elapses. You are recommended to use the Self-timer to avoid camera shake when shooting still pictures. ■ Smile Shutter/Smile Shutter (video) Set whether to use high dynamic range feature to shoot photos with natural shading even under the condition of high contrast between light and shade such as backlight. ■ Set smile level for the smile shutter (P.130). ■ ISO (only for still picture) Set ISO sensitivity.
Center Put emphasis at the center of the shooting screen and measure photometry at whole view finder to adjust the exposure. Spot Measure photometry only at the center of the shooting screen to adjust the exposure. ■ ■ ■ ■ Microphone (only for video) Set whether to pick up the surrounding sound when recording videos. Preview Set the time duration for displaying preview right after shooting. ・ When it is set to "Edit", the editing screen appears after shooting.
■ Geotagging Set whether to tag still pictures/videos location information (geotag) for the shooting spot. ・ When enabled, location information is added when appears on the shooting screen. ・ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added. ■ Touch capture Set whether to shoot by taping the shooting screen. ■ Use Volume key as Set function for assigning with the volume key.
■ Scene selection Select a shooting scene. Suitable shooting condition for the selected scene is set. Off Shoot without the scene set. Soft skin Shoot a picture making human skin look smoother. Soft snap Shoot a picture making human skin look bright and beautiful. Anti motion blur Reduce blur when taking portraits indoors. Landscape Shoot landscape depicting blue sky or plants with vivid color and focusing on distant objects.
Fireworks Shoot a crisp and clear images of fireworks. Due to long exposure time, be careful not to shake camera. ■ Exposure value (EV)/White balance Tap or drag the bar to adjust the exposure value. White balance is automatically adjusted depending on the light source. Auto Adjust to the light source automatically. Incandescent Adjust for lighting like incandescent bulb. Fluorescent Adjust for lighting like fluorescent. Daylight Adjust for a sunny place. Cloudy Adjust for a cloudy sky or shaded area.
Shooting with Face detection Shooting with Smile Shutter Focus on a face located away from the center. Shoot smile face. When the capturing mode is set to "Superior 1 Press and hold k for over a auto", face detection works automatically. second. 1 Press and hold k for over a second. 2 Tap the capturing mode iconu [Manual]. ・ 3 4 5 to display uTap " " tab/" " tabu [Focus mode]u[Face detection]u x. Point the camera at the object. ・ Detected faces are framed (up to 5 faces).
h Album ❖Information Displaying photos/videos ■ From the Home screen, [Album]. A list of images are displayed in chronological order. ・ For the first activation, select the category you want to open from a list of categories. ・ Image list screen a Depending on the number of saved images, it may take some times to load images. ・ To zoom in/out images, pinch out/in on the image list screen. ・ View/play photos or videos.
■ Photo viewing screen ・ Operating image files Video playback screen (P.134) a bc 1 2 From the Home screen, [Album]u Tap a photo/video. Tap a screen. Upload to online service, send via Bluetooth or mail, copy/move to microSD card. Play in slideshow, edit, register or check the detail information. Use "Throw" to play back photos or videos with other device wirelessly. d e f gh a b c d Return to the image list Sharing menu (P.132) Option menu (P.132) Location information ・ Tap to add geotagging.
YouTube YouTube is a free online video streaming service. You can play, search for and upload videos. ・ A packet communication charge is applied when downloading or uploading video content using mobile networks. Playing YouTube video 1 From the Home screen, [Google]u [YouTube]. ・ 2 If you do not set Google account, the Google account setting screen appears. Follow the onscreen instructions. Media Player Play back music and videos stored on the internal storage or a microSD card using Media Player.
■ ❖Information Music playback screen ・ a b d e f g h You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played.
g Auto-rotate screen ON/OFF ・ Tap to turn red and disable Auto-rotate screen. h Volume control ・ Alternatively, on the playback screen, press the volume key to adjust the volume. ❖Information ・ Tap the screen to display option menu icons and other items. Ending Media Player 1 On the Media Player screen/song player screen/movie player screen, / u[Exit]. Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network.
You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information. ・ You cannot use the terminal as a highaccuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information. ・ Global Positioning System (GPS) is created and managed by U.S.
Activating GPS/Location services You can position your current location using GPS, Wi-Fi, and information sent from mobile network base stations. u 1 From the Home screen, [Settings]. 2 [Location]uTap of "Location" or drag it right. 3 Read the Attention message about location information and tap [Agree]uRead the Location consent message and tap [Agree]. Finding the current location on the map You can detect your current location using location information service.
Searching for a location 1 2 3 4 From the Home screen, [Google]u [Maps]. Fill out the search bar. on the software keyboard. Tap a destination. Schedule Displaying schedule 1 From the Home screen, u[Schedule]. ・ Displaying information ("Schedule & Memo application" license agreement) screen. Configure settings by following the instructions on the resulting screen asking if you want to use cloud services. Display information such as traffic information etc. on the map.
Creating schedule event 1 2 3 From the Home screen, u[Schedule]. [Add]uEnter an item. [Save]. ❖Information ・ When an alarm of event is set, appears on the status bar at the set time. Drag the status baruTap [It's time] to display details of the event. Displaying events of Schedule 1 From the Home screen, u[Schedule]uDisplay scheduled date/time. ・ 2 To edit an event, tap [Edit]. ❖Information To delete an event, touch and hold an event in Step 2uTap [Delete one]u[Delete].
❖Information ❖Information u[Delete To delete alarms, in Step 2, tap alarms]uMark alarms you want to deleteu[Delete]* u[Yes]. * A number of marked alarm is displayed at the right side of "Delete". ・ Enabling/Disabling alarm u[Alarm 1 From the Home screen, & clock]. 2 Tap / of alarm you want to switch ON/OFF or drag it right/left. Time display during day-light saving time may differ from time difference displayed on the screen when adding a city in Step 2.
docomo backup With docomo backup, you can back up or restore data to/from " データ保管 BOX (Data Storage BOX)" or "microSD card". ・ Do not remove microSD card during backup or restoring. Doing so may damage the terminal data. ・ If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore. ・ docomo apps password is required to back up or restore (P.160). ・ To back up/restore to/from Data Storage BOX, log-in to docomo cloud is needed.
❖Information With Periodical backup, you can back up specified item data to Data Storage BOX automatically every month. ・ Note that use of Periodical backup may cause high packet communication charge. Backing up/Restoring to/from microSD card ・ Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. 2 3 [Restore]. Tap [Select] on data type to restore uMark data to restoreu[Select]. ・ 4 5 Tap [Select latest data] to select the latest data for each data type.
Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to microSD]. 2 3 [Restore]. Tap [Select] on data type to restore uMark data to restoreu[Select]. ・ 4 5 Tap [Select latest data] to select the latest data for each data type. [Add]/[Overwrite]u[Start restore] u[Restore]. Enter docomo apps passwordu [OK]. Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in Google account to docomo account.
Settings Viewing the setting menu 1 From the Home screen, [Settings]. WIRELESS & NETWORKS DEVICE PERSONAL ACCOUNTS SYSTEM u P.144 P.154 P.160 P.168 P.170 WIRELESS & NETWORKS Wi-Fi Bluetooth Data usage Xperia™ Connectivity More... Airplane mode Default SMS app Tethering & portable hotspot VPN Mobile networks NFC / Osaifu-Keitai settings P.144 P.176 P.147 P.148 P.149 P.94 P.151 P.153 P.150, P.188 P.107, P.
Turning on Wi-Fi 1 From the Home screen, u [Settings]uTap or drag right of Wi-Fi. ・ It may take a few seconds before the Wi-Fi connection is on. ❖Information Even when Wi-Fi is on, packet communication is available. However, while you connect Wi-Fi network, Wi-Fi comes first. ・ When a Wi-Fi network is disconnected, connection is automatically switched to a LTE/3G/GSM network mode. Note that packet communication charge may be applied if network connection stays switched.
Adding a Wi-Fi network manually ・ Turn Wi-Fi on beforehand (P.145). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. uEnter a network SSID of the Wi-Fi network you want to add. Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add. ・ 4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear. 4 If required, enter security information for the Wi-Fi network you want to add. 5 [Save].
Advanced Wi-Fi Set whether to control the optimization battery power consumption when Wi-Fi is on. Auto IP Enable/disable Auto IP support function. Passpoint Set whether to connect to available Passpoint network automatically. Passpoint Set Passpoint network. networks MAC address Check MAC address. IP address Check IP address. Using Wi-Fi Direct compatible device You can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point. ・ Turn Wi-Fi on beforehand (P.
❖Information Note that mobile data communication will be disabled when data usage volume reaches to the limit. ・ Change the setting value for data usage limit and the value for alert by dragging the right end of each bar in the graph. ・ Xperia™ Connectivity One-touch setup Smart Connect Setting Data usage cycle 1 2 From the Home screen, u[Settings]u[Data usage]. Tap "Data usage cycle" setting itemuSet period/[Change cycle...]. ・ Screen mirroring* When you tap [Change cycle...
Windows tethering DUALSHOCK™3/ DUALSHOCK™4 MirrorLink™ USB Connectivity Display the description about Windows tethering. To connect by Windows tethering, set the following beforehand. ・ Turn on Bluetooth function of the terminal and the PC (P.176). ・ Set security of Portable Wi-Fi hotspot to "WPA2 PSK" (P.152). ・ Pair the terminal and a PC whose OS is Windows 8.1 or later via Bluetooth (P.177). Connect a DUALSHOCK® series wireless controller to your terminal.
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For using mopera U, Business mopera Internet add the access point manually. For details on mopera U, refer to mopera U website. Checking the access point in use 1 From the Home screen, u[Settings]u[More...]u[Mobile networks]u[Access Point Names]. ・ It is recommended that you use the displayed access point without editing.
sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as i-mode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on spmode, refer to NTT DOCOMO website. Setting USB tethering 1 2 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. Connect the terminal to the PC with a USB compatible PC with Micro USB Cable 01 (optional) etc. (P.38).
Setting Wi-Fi tethering 1 2 3 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. [Portable Wi-Fi hotspot]. Confirm "Details"u[OK]. ❖Information If Wi-Fi tethering starts while connecting to Wi-Fi network or the terminal and DLNA device are connected via Wi-Fi network, Wi-Fi network is disconnected. Wi-Fi network is automatically connected when Wi-Fi tethering ends. ・ Wi-Fi tethering can be used with USB tethering or Bluetooth tethering at the same time.
Connecting to a VPN (Virtual Private Network) ❖Information ・ To edit/delete VPNs, touch and hold a VPNu[Edit profile]/[Delete profile]. Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. Connecting to a VPN ❖Information 2 3 ・ To set up a VPN access from the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website.
Clear viewed notifications DEVICE Personalization Home Call Sound Display Storage Power management Apps Tap & pay P.154 P.154 P.87, P.192 P.155 P.156 P.157 P.158 P.159 P.160 Personalization Motion Themes Wallpaper Preferred apps settings Lock screen Set whether to answer or reject call without touching the screen while receiving. You can change themes for the Home screen, wallpaper of the lock screen, etc. P.
Phone ringtone Increasing ringtone* Sound The sound setting for music recommended by Sonny. It helps optimize the settings for digital signal processing technology with a onetouch operation. Sound effects Set sound effects. Dynamic Set to play at a normalizer comparable volume when songs with different volume levels are played. Headphones Set the sound quality suitable for the headphones of your choice. Noise canceling Reduce background noise by turning on the noise-canceling function.
Adjusting each sound volume Adjust volumes for playing media, ringtone, notification sounds and alarms. 1 From the Home screen, u[Settings]u[Sound]u [Volumes]. 2 3 Drag the slider to the right or left. [OK]. Display Image enhancement ❖Information Even if alarm volume is set in Volumes, set in "Alarm & clock" app is given priority (P.139). ・ Press Volume key when the Home screen is displayed to adjust the volume for ringtone. Press Volume key while receiving a call to mute the ringtone.
Smart backlight control Daydream Font size Tap to wake up Notification light Set the backlight not to turn off when you use the terminal holding with your hand even while touch operation is not performed. Set the screensaver. Set font size. Set whether to turn on the backlight by double-tapping the screen when the backlight is turned off. Set whether to notify missed call etc. with blinking notification LED. Adjusting the screen brightness 1 2 From the Home screen, u[Settings]u[Display]u [Brightness].
Check available memory space of USB storage. Unmount Cancel connection of USB storage*1 USB storage to remove it safely. Mount USB Have USB storage storage*1 recognized. Clear USB Format USB storage. storage*1 MISCELLANEOUS Transfer data Transfer data in the to SD card*2 device memory (internal storage) to the microSD card. Remote Set to handle files on shares a remote server such as NAS at home etc. in the same way as ones on the terminal.
Apps Manage and delete installed applications, display memory usage condition, etc. or change the settings. Managing applications 1 2 From the Home screen, u[Settings]u[Apps]. Tap the application you want to manage. To delete application data, tap [Clear data]uRead the note and tap [OK]. ・ Tap [Clear cache] to delete cache or tap [Clear defaults] to delete settings for activating the application and restore to the default. ・ Force-quitting an application 1 2 3 From the Home screen, u[Settings]u[Apps].
4 [Disable]uRead the notes and tap [OK]. ❖Information When you disabled an application, some other applications linked to the disabled application may not be operated correctly. Enable the disabled application again to operate them correctly. ・ Resetting application You can reset disabling applications on "All" tab (P.159), settings for activating application (P.159), or restricting background data (P.148). 1 2 3 From the Home screen, u[Settings]u[Apps]. u[Reset app preferences]. [Reset apps].
Send device error information Remote Initialization Service Profile setting Switch USB debugging Open source licenses Set for sending error information to the server managed by DOCOMO. Set for using the service by remote operations such as initializing data etc. in the terminal. Check or change your profile information used for docomo services. Configure settings for using a dedicated terminal, especially at a docomo Shop. View open source licenses.
Security Screen lock Unlock sensitivity*1 Improve face matching*1 Liveness check*1 Make pattern visible*1 Automatically lock*1 Power button instantly locks*1 Allow widgets on lock screen Owner info Encrypt phone Set up SIM card lock*2 Make passwords visible P.165 Set the distance at which you can release the Bluetooth lock. Improve face unlock accuracy. Set whether to require blinking for unlocking by Face unlock. Set whether to show pattern when entering pattern.
❖Information If you forget your security codes, you must bring your official identification (such as driver's license), the terminal, and docomo nano UIM card with you to the nearest docomo Shop. For details, contact the "General Inquiries" on the last page. ・ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop.
■ PIN code You can set up a security code called a PIN code for your docomo nano UIM card. The code is set to "0000" at the time of subscription; however, you can change the code by yourself. PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use of docomo nano UIM card by a third party every time you insert the docomo nano UIM card into the terminal or when the terminal is powered on.
Changing the PIN code ・ 2 You can change only when you activate the SIM card lock. 1 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Change SIM PIN]. 2 3 4 Enter the current PIN codeu[OK]. Enter a new PIN codeu[OK]. Enter the new PIN code againu[OK]. Unlocking PIN lock 1 2 3 Enter the PUK codeu . Enter a new PIN codeu . Enter the new PIN code againu .
■ 1 To turn off the screen lock From the Home screen, u[Settings]u[Security]u [Screen lock]uEnter the current unlock pattern/PIN/passwordu [None]. If you forget how to unlock ■ If you set "Pattern" "You have drawn an incorrect unlock pattern 5 times. Try again in 30 seconds. " appears when you enter incorrect unlock pattern 5 times consecutively. ・ When you set a Google account, [Forgot pattern]uEnter Google account and passwordu[Sign in] to unlock the screen lock and reset a new unlock pattern.
Setting Voice Search Language Speech output Block offensive words Offline speech recognition Bluetooth headset Select language used for Google voice search. Set voice output. Set whether to display recognized offensive voice results. Download/manage voice recognition data for offline use. Set whether to record voice sound with Bluetooth headset. * If the phone language is set to "English (United States)", ""Ok Google" hotword detection" appears in the list.
1 From the Home screen, u [Settings]u[Backup & reset]u [Factory data reset]u[Reset phone]. ・ 2 Mark "Erase internal storage" to delete all contents (music, photos, etc.) on the internal storage. Contents in preinstalled applications such as “Album”, “Movies”, etc. are deleted. However, some contents can be downloaded from Sony Select. [Erase everything]. Setting Google account You can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc.
Setting other account 1 2 From the Home screen, u[Settings]u[Add account]. Tap an account type. ・ Configuring sync settings for your accounts ■ Synchronize information of online service with the terminal. You can display and edit information on the terminal or a PC. ・ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. After this step, follow the onscreen instructions. ❖Information ・ Use docomo account when you use "docomo backup" app (P.
Accessibility SYSTEM Date & time Accessibility Printing About phone P.170 P.170 P.171 P.171 Date & time ・ To set date/time or time zone manually, unmark "Automatic date & time" or "Automatic time zone" to disable networkprovided time/time zone in advance. Adjust date and time automatically by using network-provided information. Automatic time zone Adjust time zone automatically by using network-provided information. Set date Set date manually. Set time Set time manually.
❖Information TalkBack Touch exploration Enabling TalkBack activates Touch exploration. Touch exploration is a function that reads or displays an explanation for the item you tapped. ・ When touch exploration feature is enabled, you can operate the terminal in the different way from the usual one. To select an item, tap it once and then double-tap it. To drag, tap it once and then doubletap it, then trace the screen to desired orientation.
File management Storage structure Phone (internal storage) Folders in the internal storage by default are as follows. ・ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM DeviceConfig Download Movies Music Notifications Pictures Podcasts recovery Ringtones Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera. Used for SONY configuration tool.
Inserting microSD card ・ Opening/closing microSD card slot cover (P.25) 1 Open microSD card slot cover and check the orientation of the microSD card, then slowly insert it straight until it clicks. ・ 2 Close microSD card slot cover and press part firmly to check that no gap exists between the terminal and the cover. Insert the microSD card with metal contacts side down.
Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ・ Opening/closing microSD card slot cover (P.25) 1 From the Home screen, u[Settings]u[Storage]u [Unmount SD card]u[OK]. ・ 2 3 Use "File Commander" application to operate various data saved in the internal storage or the microSD card. 1 " Removed SD card" appears in the status bar. From the Home screen, Commander]. u[File The home screen for File Commander is displayed.
Moving/Copying folder or file Folders or files can be copied/moved between the internal storage and the microSD card. u[File 1 From the Home screen, Commander]. 2 Select an itemuTap a folder as required. 3 Mark a folder or file you want to move/copy. 4 5 / . Anywhere, u[Paste]. Searching for data u[File 1 From the Home screen, Commander]. 2 uEnter a folder name or file name. 3 From search results appeared according to the entry, tap data you want to check.
・ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ・ The terminal does not communicate wirelessly with all types of Bluetooth devices. ・ Supported Bluetooth profiles (P.214) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ・ Once paired, the setting with the Bluetooth device is saved. ・ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. 1 From the Home screen, u [Settings]u[Bluetooth]u[Search for devices].
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with Bluetooth devices. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other party's Bluetooth device. Receiving data 1 Send data from a Bluetooth device. ・ 2 appears on the status bar. Drag the status bar downwardsu [Bluetooth: Incoming file]u [Accept].
When pointing marks to each other, sending/receiving may fail. In such case, operate again to send/receive. ・ The terminal does not communicate with all NFC devices. ・ For notes when holding over the other device, (P.109). ・ Enabling NFC Reader/Writer, P2P function 1 2 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]uMark "Reader/Writer, P2P"u[OK]. "Reader/Writer, P2P" and "Android Beam" are marked. ・ appears on the status bar.
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Face the marks on the terminal and the receiver’s terminal each other. ・ When you receive data, appears on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions. Selecting NFC Type 1 2 3 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]u[NFC Type].
External device connection Connecting to PC 1 When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ・ When "Install software" screen appears on the terminal, tap [Skip] or [Cancel]. ・ Connect a PC to exchange data between the internal storage or the microSD card and a PC. ❖Information Appeared screen may vary depending on the operating system (OS) of a PC.
Display the software installation wizard when connected to a PC. USB connection Switch USB connection modes mode when connecting to a PC. WIRELESS MEDIA Connect the terminal and a host TRANSFER device in a pair via Wi-Fi network (P.182). Install software ・ When the terminal is connected to a PC with "Media transfer mode (MTP)" set in "USB connection mode", accessing to the microSD card from the terminal is unavailable.
4 5 6 Open " コンピュータ (Computer)" window on the PCuRight-click the terminal icon displayed as a portable deviceu" ネットワーク構成 (Network composition)"u" 次へ (Next)". On the pop-up screen of the terminal, tap [Pair]. On the " ポータブルデバイスのネット ワーク構成 (Network composition of the portable device)" window of the PC, click " 完了 (Done)". ・ Remove the microUSB cable from the terminal and the PC. ❖Information ・ If the privacy separator function for Wi-Fi network (access point) is enabled, pair setting cannot be made.
Setting Media server 1 2 From the Home screen, u [Settings]u[Xperia™ Connectivity]u[Media server settings]. Tap of Share media or drag it to the right. appears on the status bar. Tap [Change server name] to rename the terminal (media server) displayed on a DLNA device. ・ To upload media files from DLNA device to the terminal, mark "Upload to Xperia™". ・ ・ 3 Connect the DLNA device to the terminal using an application on the DLNA device. ・ 4 Access request for media server is notified to the terminal.
3 Tap a device on the device list. Connecting to other devices Connecting a TV Connect to a TV to activate TV Launcher and display photos and videos on the TV screen. 1 Connect to TV using commercially available MHL cable. ・ 2 3 Activate TV launcher automatically. If TV launcher does not activate automatically, , appears on the status bar. Drag the status bar downwardsuTap [TV launcher] to activate TV launcher.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 5. The terminal works in LTE network, 3G network and GSM/GPRS network service area.
Checking before overseas use Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ・ ■ Charging ・ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For AC adapter for charging overseas travel, use AC Adapter 03/04/05 (optional). Usage charge Overseas usage charges (call and packet communication) differ from those in Japan.
Settings for overseas use By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows. Setting data roaming 1 From the Home screen, u[Settings]u[More...]u[Mobile networks]. 2 Mark "Data roaming"uRead the notes and tap [OK]. ❖Information If you cannot search networks, disable mobile data communication (P.147) and then search again.
Date & time settings When "Automatic date & time", "Automatic time zone" in "Date & time" are marked, the date, time and time differences of the terminal clock are corrected by receiving the information related to time and time differences from the network of overseas network operator you connect to. ・ Correction of the time/time differences may not be performed correctly depending on the network of overseas network operator. In that case, set time zone manually.
2 Dial + (touch and hold [0])uEnter Country code, Area code (City code), a phone number in the order. If the area code begins with "0", omit "0". However, "0" may be required to dial to some country or area such as Italy. ・ To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code. ・ 3 4 . ・ When "Auto conversion" in International dial assist is marked (P.192), the international dial assist screen appears when sending. To make a call to Japan, tap [Call].
Receiving a call in the country you stay You can receive a call using the international roaming service. 1 While receiving a call, drag (left) to (right). 2 When the call is finished, tap [End call]. ■ Having someone make a call from other than Japan to the country you stay You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan).
Setting International dialing assist International roaming settings Make settings for using international roaming or international calls. ・ For some overseas network operators, settings may not be made. 1 2 From the Home screen, u [Call settings]u[Roaming settings]. Restricting incoming calls Incoming notification on roaming Roaming guidance International dial assist Network service . Set whether to restrict incoming calls during international roaming.
2 [Call settings]u[Roaming settings]. 3 [Network service]uSelect a target service. Remote operation (charged) Caller ID request (charged) Incoming call notific. (charged) Roaming guidance (charged) Voicemail (charged) Call forwarding (charged) 4 Set whether to start Remote operation. Set whether to start Caller ID display request service. After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically.
Appendix/Index Troubleshooting Troubleshooting First, check if the software update is necessary for the terminal. If necessary, perform the software update (P.206, P.212). ・ When checking the following items not to improve the state, contact the phone number given in "Repairs" the last page of this manual (in Japanese only) or DOCOMO-specified repair office. ・ ■ Power supply Cannot power on the terminal. ・ Check if the battery is not run out. → P.33 Screen is frozen, the power cannot be turned off.
The notification LED blinks in red and the terminal cannot be operated. ・ When the battery level is low, charge the battery. → P.33 ■ Terminal operation Become hot while operating/charging. ・ While calling, depending on the radio wave condition or call duration time, the terminal may become hot around the earpiece/speaker. This condition is not abnormal. ・ While operating or charging, or if you watch 1Seg, record video, etc.
The screen reacts slowly when you tap or press keys. ・ When large amount of data is saved in the terminal or transferring large-size data between the terminal and microSD card, the reactions on the screen may be delayed. The docomo nano UIM card is not recognized. ・ Check if the docomo nano UIM card is attached in the right direction. → P.31 The clock is not on time. ・ The clock time may become wrong when the power is turned on for a long time.
■ Phone call ・ Due to the crossing of radio waves, at the crowded public places, calls/mails are Cannot make a call even if you tap . crossed and the connection status may ・ Check if you activate Airplane mode. → P.149 not be good. Move to other place or call The ringtone does not sound. again at other time. ・ Is "Ringtone & notifications" in Volumes ■ Display set to silent? → P.156 The display is dim. ・ Check if the following functions are ・ Check if Sleep is set in short time period. → activated. P.
■ Sound During a voice call, the distant party's voice is hard to listen to or too loud. ・ Check if the listening volume is changed. → P.84 ・ Set the equalizer to adjust sound quality during a call. → P.88 ・ Enable Speaker voice enhancement, Slow talk to make the caller's voice clear to understand. → P.88 ■ ■ ■ Osaifu-Keitai Osaifu-Keitai function is unavailable. ・ When activating Omakase Lock, OsaifuKeitai functions are unavailable regardless of the NFC/Osaifu-Keitai lock settings.
Cannot use the terminal overseas (when is displayed) ・ Check if you are out of the international roaming service area or in an area with poor signal strength. Check if the service area and network operator are available, referring to "Mobile Phone User's Guide [International Services]" or DOCOMO International Services website. ・ Change the network settings or overseas network operator settings. - Set "Network mode" to "LTE (preferred)/ 3G/GSM". → P.
■ Bluetooth function The terminal cannot be connected to a Bluetooth communication device/A Bluetooth communication device cannot be found from the terminal. ・ Make Bluetooth communication device (commercial item) registering stand-by state and then register the device on the terminal.
Error messages ● No service ・ The terminal is out of service area, or the received signal is too weak. Move to a location where radio signal can be reached. ・ The docomo nano UIM card is not working properly. Insert the docomo nano UIM card in another terminal. If this works, it is probably the terminal that is causing the problem. In this case, contact "Repairs" on the last page of this manual (in Japanese only). Removing and inserting docomo nano UIM card may solve the problem.
あんしん遠隔サポート (Anshin 2 Enkaku Support) By sharing screens of your terminal with NTT DOCOMO, you can receive technical support to make settings (in Japanese only). ・ This service is not available when your docomo nano UIM card is not inserted, during international roaming, or in Airplane mode. ・ Anshin Enkaku Support is a service requiring subscription. ・ Some operations and settings are not supported. ・ For details on Anshin Enkaku Support, refer to NTT DOCOMO website.
Warranty and After Sales Services Warranty Make sure that the warranty is received with the terminal upon purchase. Check to be sure that " 販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's free warranty starting from the date of purchase.
When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty or that involve malfunction and damage due to incorrect handling by the owner (damage of microUSB connection jack, headset jack, liquid crystal, etc.) will only be repaired at the owner's expense, even if the warranty period is still effective.
Malfunction and damage due to modifications will be repaired at the owner's expense, even if the warranty period is still effective. ● Do not remove the inscription sticker on the terminal. ・ Note that if the inscription sticker is removed or is replaced with a different sticker, it may disqualify the terminal from repairs. ● Note that the settings and other information may be reset (cleared) as a result of malfunction, repair or other handling. In this case, make the settings again.
Software update It is a function to connect to a network and check if software update for SO-04G is required, then update software if required. Software update is announced on NTT DOCOMO website. ・ The following three update options are available: - Automatic Update : Update file is downloaded automatically and write it at the set time. - Immediate Update : Update immediately. - Reserved Update : Update at the reserved time automatically.
If software update is not needed, "No update is needed." appears. ・ During international roaming or when the terminal is out of service area, "When docomo network is not available, or during roaming, software update is not available even if Wi-Fi is connected." or "When docomo network is not available, or during roaming, install cannot be started even if Wi-Fi is connected." appears. The same messages appear even while connecting via Wi-Fi.
2 Perform a target operation. "OK" : Return to the Home screen. Updating starts when the preset time reaches. ・ "Set Time" : Reserved update → "Reserving software update" (P.209) ・ "Start update" : Update immediately → "Updating software immediately" (P.208) Updating software immediately ・ Software update starts immediately. ・ There are 2 ways to activate software update: activating from Software update notice screen and activating from the menu.
■ Post-update display appears on the status bar. Drag the status bar downwardsuTap the notification, a message indicating that software update is complete appears. Reserving software update You can preset time to update the software if you want to specify another time for installing the update file. 1 Display the Software update notice screenu[Set Time]. 2 Set a timeu[Set].
Upgrade Android software Upgrade Android software This function allows you to connect the network, check if Android software in the terminal needs to be upgraded, and download update file to upgrade if necessary. Check (Upgrade Android software) on the status bar or the NTT DOCOMO website for available Android software. The following updates are applied to the terminal by Upgrade Android software.
- While updating software Upgrading software may take time. During international roaming or when the terminal is out of service area, "Unable to start upgrading in an area where Wi-Fi or FOMA/Xi signal is unreachable" appears. ・ When Upgrade Android software is performed, some settings are initialized. Make the settings again. ・ When upgrading Android software, the private information concerning the terminal (model, serial number, etc.) is automatically sent to the server of DOCOMO.
*1 *2 If "Download" is selected, when downloading the update files is complete, installing to the terminal is available. If downloading via Xi/FOMA is not available, "Perform at scheduled time (only via Wi-Fi)" appears. ❖Information When the latest software is already applied to the terminal, "No upgrade is needed" appears. ・ If downloading stops halfway, data downloaded before interruption is retained for up to 14 days. To resume downloading, resume from (Download stopped) on the Notification panel.
Main specification ■ Charging time The terminal Product name Size Weight Internal memory External memory compatible Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call GSM time VoLTE call (voice) SO-04G Approx. 127mm (H)u approx. 65mm (W)u approx. 8.6mm (T) Approx. 129g ROM : 16GB RAM : 2GB microSD card of up to 2GB microSDHC card of up to 32GB microSDXC card of up to 128GB (as of October, 2014) Stationary (Auto) : Approx. 800 hours Stationary (Auto) : Approx.
Camera : Approx. 20,700,000 pixels Front camera : Approx. 2,200,000 pixels Camera recorded pixels Camera : Approx. (Max.) 20,700,000 pixels Front camera : Approx. 2,100,000 pixels Zoom Camera : (Still picture) Max. approx. 8.0x (31 levels), (Video) Max. approx. 8.0x (31 levels) Front camera : ― Still picture recording size Camera : 5248u3936 (20.7MP 4:3) 5248u2952 (15.5MP 16:9) 3264u2448 (8MP 4:3) 3840u2160 (8MP 16:9) 2048u1536 (3MP 4:3) 1920u1080 (2MP 16:9) Front camera : 1920u1080 (2MP 16:9) 1600u1200 (1.
*3 Bluetooth standards for Bluetooth device connection procedure according to the product's applications. ・ Continuous stand-by time is an estimate of the stand-by time when radio signal reception is normal. Stationary continuous stand-by time is the estimated average operation time when radio signal reception is normal.
■ File format (document) The terminal supports files of the following versions/extensions. Type Microsoft Word Microsoft Excel Microsoft PowerPoint PDF Version/Extension Microsoft Word 97 - 2010/.doc, .docx, .rtf, .txt, .log, .docm, .odt Microsoft Excel 97 - 2010/.xls, .xlsx, .csv, .xlsm, .xlm, .ods Microsoft PowerPoint 97 - 2010/.ppt, .pps, .pptx, .ppsx, .pptm, .ppsm, .odp Ver1.4 - 1.7/.pdf * Some files may not be viewed properly due to corrupted layouts.
(Nicaragua)/Spanish (Panama)/Spanish Vietnamese/Hebrew word/Belarusan/ (Paraguay)/Spanish (Peru)/Spanish (Puerto Persian/Polish/Bosnian/Portuguese/ Rico)/Spanish (Dominican Republic)/ Macedonian/Malay/Latvian/Lithuanian/ Spanish (Uruguay)/Spanish (Venezuela)/ Romanian/Russian/English/Chinese Basque/French (Belgique)/French (Traditional)/Chinese (Simplified)/Japanese (Canada)/French (France)/French ■ Text language (Voice input) (Switzerland)/Galician/Croatian/Icelandic/ Japanese/Afrikaans/Indonesian/Malay/ I
Arabia)/Arabic (Jordan)/Arabic (Lebanon)/ Arabic (Bahrain)/Arabic (Oman)/Arabic (Palestine)/Chinese, standard (Taiwan, Traditional)/Chinese, standard (China, Simplified)/Chinese, standard (Hong Kong, Simplified)/Chinese, Cantonese (Hong Kong Traditional)/Korean Certificate and compliance You can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number). u 1 From the Home screen, [Settings].
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This license is governed by the laws of Japan. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Rovi, G-GUIDE, G-GUIDE MOBILE and their logos are trademarks or registered trademarks in Japan of U.S. Rovi Corporation and/or its affiliates. ・ Xperia, TrackID, Info-eye, Socialife and Xperia Lounge are trademarks or registered trademarks of Sony Mobile Communications Inc. ・ PlayStation, and DUALSHOCK are trademarks or registered trademarks or Sony Computer Entertainment Inc.
HDMI, HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ・ MirrorLink and MirrorLink logo are trademarks or registered trademarks of Car Connectivity Consortium LLC. ・ Linux is a registered trademark of Linus Torvalds,individual.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) ・ ANT and ANT+ are trademarks or registered trademarks of ANT Wireless. ・ Using your device as a fitness hub with ANT+™ You can use your device with health and fitness products that also support ANT+™ technology.
Index A About phone ・・・・・・・・・・・・・・・・・・・・・・・・ 171 Access point Initializing ・・・・・・・・・・・・・・・・・・・・・・・・・ 150 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 150 Accessibility ・・・・・・・・・・・・・・・・・・・・・・・・・ 170 Account Removing ・・・・・・・・・・・・・・・・・・・・・・・・・ 169 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 168 ACCOUNTS ・・・・・・・・・・・・・・・・・・・・・・・・・・ 168 Adjusting sound volume ・・・・・・・・・・・・・・・ 156 Airplane mode ・・・・・・・・・・・・・・・・・・・・・・・ 149 Alarm & clock ・・・・・・・・・・・・・・・・・・・・・・・・ 139 Setting alarm ・・・・・・・・・・・・・・・・・・・・・・ 139 Album ・・・・・・・・・・・・・・・・・・・・・
Sending ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Bookmark ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Brightness ・・・・・・・・・・・・・・・・・・・・・・・・・・・ Browser ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Adding tab ・・・・・・・・・・・・・・・・・・・・・・・・ Bookmark ・・・・・・・・・・・・・・・・・・・・・・・・・ History ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Link ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Searching text・・・・・・・・・・・・・・・・・・・・・・ Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 178 104 157 102 103 104 104 103 103 103 C Calculator ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Calendar ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 57 Call・・・・・・・・・・・
Chrome ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Connecting DLNA device ・・・・・・・・・・・・・・・ 183 Media server settings ・・・・・・・・・・・・・・・・ 184 Connecting TV ・・・・・・・・・・・・・・・・・・・・・・・ 185 Contact docomo ・・・・・・・・・・・・・・・・・・・・・・・ 88 Contact Picker 2.
Google+ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 GPS Activate ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 137 GPS function ・・・・・・・・・・・・・・・・・・・・・・・・・ 135 H Handwriting ・・・・・・・・・・・・・・・・・・・・・・・・・・ 66 Hangouts ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 HDMI ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 185 Home・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 154 Home application docomo ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 71 Switching ・・・・・・・・・・・・・・・・・・・・・・・・・・ 63 Xperia ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 50 Home screen ・・・・・・・・・・・・・・・・・・・・・・・・・・ 50 Adding (docomo LIVE UX) ・・・・・・・・・・・・・
Message (SMS) ・・・・・・・・・・・・・・・・・・・・・・・・ 93 Deleting message ・・・・・・・・・・・・・・・・・・・・ 95 Deleting messages (SMS) by sender/recipient ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 95 Receiving ・・・・・・・・・・・・・・・・・・・・・・・・・・ 94 Registering contact ・・・・・・・・・・・・・・・・・・ 94 Sending ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 93 Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 95 MHL ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 185 microSD card Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 157 Structure ・・・・・・・・・・・・・・・・・・・・・・・・・・ 172 Missed call・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 85 Moj
Phonebook list screen ・・・・・・・・・・・・・・・・・・ 89 Photo collection ・・・・・・・・・・・・・・・・・・・・・・・ 59 Photos ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 PIN code ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 164 Play Books ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Play Games ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58 Play Movies & TV・・・・・・・・・・・・・・・・・・・・・・・ 58 Play Store ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 105 Deleting ・・・・・・・・・・・・・・・・・・・・・・・・・・ 106 Installing ・・・・・・・・・・・・・・・・・・・・・・・・・・ 106 Playing video ・・・・・・・・・・・・・・・・・・・・・・・・ 133 PlayStation ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 57 P
sp-mode ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 151 Status bar ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 46 Status icon ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 46 Stopwatch ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 140 Storage Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 157 Structure ・・・・・・・・・・・・・・・・・・・・・・・・・・ 172 SYSTEM ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 170 T Take screenshot ・・・・・・・・・・・・・・・・・・・・・・・ 44 Tap & pay Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 160 Task manager ・・・・・・・・・・・・・・・・・・・・・・・・・ 62 Tethering ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 151 Bluetooth tethering ・・・・・・・・・・
X Xperia Chinese keyboard ・・・・・・・・・・・・・・・・ 65 Xperia Connectivity ・・・・・・・・・・・・・・・・・・・ 148 Xperia Japanese keyboard ・・・・・・・・・・・・・・・ 65 Help & Tips ・・・・・・・・・・・・・・・・・・・・・・・・・ 64 Xperia Lounge Japan ・・・・・・・・・・・・・・・・・・・ 57 Y YouTube ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 133 Numerics 1Seg ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Program guide ・・・・・・・・・・・・・・・・・・・・・ Recording ・・・・・・・・・・・・・・・・・・・・・・・・・ Reserve Recording ・・・・・・・・・・・・・・・・・・ Reserve Viewing ・・・・・・・・・・・・・・・・・・・・ Settings ・・・・・・・・・・・・・・・・・・・・・・・・・・・ TV link ・・・・・・・・・・・・
Check or change your subscription, make various applications, and more online. sp-mode: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " ドコモオンライン手続きの一覧をみる (See list of docomo online procedures)" (Packet communication free) (In Japanese only) PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) ⇒ ドコモオンライン手続き一覧 (List of docomo online procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.