User Guide

Legal information

Sony E5633/E5663

Publication number: 1284-9581.2

This Startup guide is published by Sony Mobile Communications Inc. or its local affiliated company, without

any warranty. Improvements and changes to this Startup guide necessitated by typographical errors,

inaccuracies of current information, or improvements to programs and/or equipment, may be made by

Sony Mobile Communications Inc. at any time and without notice. Such changes will, however, be

incorporated into new editions of this Startup guide. All illustrations are for illustration only and may not

accurately depict the actual device.

See regulatory information such as the device CE mark in the relevant label tray in the device.

All product and company names mentioned herein are the trademarks or registered trademarks of their

respective owners. Any rights not expressly granted herein are reserved. Visit

www.sonymobile.com/global-

en/legal/

for more information.

Product compliance: This product has been manufactured by or on behalf of Sony Mobile Communications

Inc., 1-8-15 Konan, Minato-ku, Tokyo 108-0075, Japan. Inquiries related to product compliance based on

national legislation shall be addressed to Sony Mobile Quality Office, Sony Mobile Communications Inc.,

1-8-15 Konan, Minato-ku, Tokyo 108-0075, Japan. Should your device need warranty service, please return

it to the dealer from whom it was purchased or visit

support.sonymobile.com/contact

to contact your local

Sony Mobile repair partner (national rates may apply).

To view the CE mark and the FCC ID

Insert a fingernail into the gap between the top of the

memory card slot cover and the device, then open the

cover.

Using the tip of a paper clip (or other similar object with a

long, fine tip), press the button next to the nano SIM card

slot to make the nano SIM card holder pop out.

Drag out the nano SIM card holder fully.

Using the same tool as in step 2, drag out the label tray

from the nano SIM card slot. The CE mark is displayed on

the label tray.

To view the FCC ID, turn the device over. The FCC ID is

displayed on the other side of the label tray.

If a SIM card is inserted in the device, the device restarts

automatically when you drag out the nano SIM card

holder.

For more information about how to pop out the nano SIM

card holder, refer to the instructions on how to insert the

nano SIM card.

To view the regulatory compliance mark

•

Open the phone dialer, then enter *#07#.